Skip to content

Latest commit

 

History

History
48 lines (30 loc) · 2.83 KB

README.md

File metadata and controls

48 lines (30 loc) · 2.83 KB
Raw

ADS1115_WE

An Arduino library for the 16-bit, 4-channel ADS1115 and the 12-Bit, 4-channel ADS1015 ADC with gain and alert functions.

I have have tried to optimize the library for convenience to use. If you try the examples I recommend to start with Single_Shot.ino.

You can find more details here:

https://wolles-elektronikkiste.de/ads1115 (German)

https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English)

All features of the ADS1115 and ADS1015 are implemented, including alert functions.

The examples are written for the ADS1115 with one exception, which is Continuous_ADS1015.ino. This shows how to "translate" the sketches for the ADS1015. Most enum values like ADS1115_RANGE_6144 and ADS1015_RANGE_6144 are even identical. The exceptions are the enum values for the conversion rate.

In version 1.4.1 I have implemented the option to use TinyWireM instead of Wire. Therefore the library can be used, for example, on an ATtiny85.

If you like the library it would be cool if you can give it a star. If you find bugs, please inform me.

Some remarks on the continuous mode

When you change channels in continuous mode using setCompareChannels(), the current conversion will be completed first before the next measurement for the new channel will be started. This means you have to wait the time of two conversions before you can be sure that a measured value of the new channel is available. In contrast to the single shot mode, there is no way to determine when this process is completed. Therefore I added delays according to the rate that you have set. The disadvantage is that changing channels is a blocking process.

If you don't want blocking code, you can use the function setCompareChannels_nonblock(). But please be aware that you have to ensure yourself that the measured value has been obtained from the new channel.

I recommend using the single shot mode instead, because in this mode you can immediately start a new measurement on the new channel and you can check whether the current conversion is completed with the isBusy() function.

Beware of fake modules

There are ADS1115 modules which use ADS1015 ICs and also there are ADS1015 modules which are based on ADS1115 ICs. In theory you should recognize the IC by its label which is "BRPI" for the ADS1015 and "BOGI" for the ADS1115. But I have even found ADS1115 ICs labeled with "BRPI" which is definitely a fake. The difference between the ADS1115 and the ADS1015 is a) the 16-bit vs. 12-bit resolution an b) the speed.

This example is almost funny:

ADS1015_absurd

If you want to find out what you really have on on your module, then try the example sketch "Who_Am_I.ino". Do not change anything apart from the I2C address if necessary.