Simple MIPS IV assembler for JavaScript.
The features that are included are compatible with armips, when possible. armips is much more sophisticated currently though.
import { assemble } from "mips-assembler";
assemble(`
.org 0x80050000
.definelabel ExternalPtr,0x8033C000
.definelabel ExternalLibFn,0x80104321
ADDIU SP SP 0xFFE0
SW RA 0x18(SP)
loop:
LUI A0 hi(ExternalPtr)
JAL ExternalLibFn
ADDIU A0 A0 lo(ExternalPtr)
BEQ V0 R0 loop
NOP
LW RA 0x18(SP)
JR RA
`)
// ArrayBuffer<
// 27BDFFE0 ADDIU SP SP 0xFFE0
// AFBF0018 SW RA 0x18(SP)
// 3C048034 LUI A0 0x8034
// 0C0410C8 JAL 0x80104321
// 2484C000 ADDIU A0 A0 0xC000
// 1040FFFD BEQ V0 R0 -3
// 00000000 NOP
// 8FBF0018 LW RA 0x18(SP)
// 03E00008 JR RA
// >The default return value is an ArrayBuffer.
An opts object can be passed as the second parameter. It can contain various properties to affect behavior.
| Option | Description |
|---|---|
buffer |
(ArrayBuffer) When passed, assembly will be performed on the given buffer, rather than creating a new buffer. |
files |
(Object) Used with the include file directive, see below. |
text |
(String) Output will be instructions in text format, similar to the format shown beside the ArrayBuffer above. |
symbolOutputMap |
(Object) If you pass an object on this property, it will be filled with a map from symbol name to the output location of that symbol. For example, if you labeled a .word as my_number and that number was output to buffer offset 0x100, the symbolOutputMap would be { "my_number": 0x100 }. |
The UMD module in dist/umd exports a MIPSAssem global.
Labels can be used to reference locations by name. Labels are global by default.
main:
ADDIU SP SP -32
...
loop:
JAL 0x80023456
...
They can be on their own line, or on the same line as other instructions or labels. Labels can contain letters, numbers, underscores, ? or !.
main:
main2: start: ADDIU SP SP -32
...
loop?!: JAL 0x80023456
...
If a label starts with @@, it is a local label and only can be defined and used in the area between the two nearest global labels.
; The example from armips...
GlobalLabel: ; This is a global label
@@LocalLabel: ; This is a local label, it is only
; valid until the next global one
OtherGlobalLabel: ; this will terminate the area where
; @@LocalLabel can be used
j @@LocalLabel ; as a result, this will cause an error
If a label starts with a single @, it is a static label. Static labels act like global labels, but are only visible to the current "file." See the include or beginfile/endfile directives.
.org RamAddress
Adjusts the working memory location the assembly. This affects individual instructions, but not the locations where they are outputted.
.orga BufferOffset
Sets the output pointer to the specified offset. This affects the location that subsequent instructions are written to, but doesn't affect individual instructions.
.definelabel label,value
Defines label with a given value, creating a symbol for it.
.include "filename"
Inlines a "file" containing assembly at the current location.
Note that, since we're in JavaScript, the "filename" is not a path to an actual file. It should be a key in the files object that can be passed through the assemble opts.
assemble(`
.org 0x80001000
.include "external"
`, {
files: {
"external": `
ADDIU A0 R0 123
.ascii "This is the external 'file'"
`
}
});
.beginfile
.endfile
If you want to achieve file scoping without actually having separate assembly in the files opt object, you can surround assembly with .beginfile and .endfile. This would enable usage of static labels for example.
Limited support is available for equ direct text replacements.
NumList equ 1,2,3,4
.word NumList
As with regular symbols, these are global replacements by default. A single leading @ creates a static replacement, and two leading @@ creates a local replacement.
.align num
Writes zeros into the output file until the output position is a multiple of num. num has to be a power of two.
.fill length[,value]
Inserts length amount of bytes of value. If value isn't specified, zeros are inserted. Only the lowest 8 bits of value are inserted.
.skip length
Skips length amount of bytes without overwriting them.
.byte value[,...]
.db value[,...]
Writes a sequence of bytes. Only the lowest 8 bits are inserted.
.halfword value[,...]
.dh value[,...]
Writes a sequence of 16-bit values. Only the lowest 16 bits are inserted.
.word value[,...]
.dw value[,...]
Writes a sequence of 32-bit values. Only the lowest 32 bits are inserted.
.float value[,...]
Writes a sequence of single-precision floats.
.ascii value[,...]
.asciiz value[,...]
Writes a sequence of characters or bytes. Each parameter can be any expression that evaluates to an integer or a string. If it evaluates to an integer, only the lowest 8 bits are inserted. If it evaluates to a string, every character is inserted as a byte.
With asciiz, a single null terminator is inserted after the values.
.if cond
The content of a conditional block will only be used if the condition is met. In the case of .if, it is met of cond evaluates to non-zero integer.
.else
.elseif cond
The else block is used if the condition of the condition of the if block was not met. .else unconditionally inserts the content of the else block, while the others start a new if block and work as described before.
.endif
Ends the last open if or else block.
Also known as "pseudo-instructions."
li reg,value
Loads the value into the specified register using the appropriate combination of lui, addiu, or ori.
move dest,reg
Copies the contents of reg into dest using an addu.
beqz reg,dest
bnez reg,dest
bnezl reg,dest
These functions can be used in place of immediates, and can be passed symbols/labels instead of just immediates.
| Function | Description |
|---|---|
abs(value) |
Absolute value of value |
hi(value) |
High half of 32-bit value value, adjusted for sign extension of low half |
lo(value) |
Sign-extended low half of 32-bit value value |
org() |
Current memory address |
Both ; and // single-line comments are supported. /* */ block comments are also supported.
To build:
npm install
npm run build
To run tests:
npm run test
MIT