I needed a simple case for the CYD in landscape mode. Main goals:
- Small case
- Supports CYD version with USB-C port
- Opening for light sensitive resistor (LDR) to allow automatic scren brightness adjustment. This requires a solid light barrier between the display and the LDR, otherwise the automatic adjustment is influenced by the backlight LEDs themselves
- Opening in the back for the LED
- Boot and reset buttons can be pushed via buttons in the back plane of the housing
- Front does not interfere witht he touch display And last not lease: stable housing that actually fits - I did some test prints to ensure that no rework is needed to fit the CYD into the housing
The design is based on Leo Ruiz' housing : https://www.thingiverse.com/thing:5990927, but completely redone in Fusion 360 Fusion 360 File is included
- Housing has been tested on Ender3 S1
- Parameters: PLA, 0.16 mm, 205°C Nozzle, 60°C Bed
- You will need 4 pieces 3 mm Brass inserts and 4 screws 3 x 8 mm
- USB-C Cable
