forked from espruino/Espruino
-
Notifications
You must be signed in to change notification settings - Fork 1
/
dist_readme.txt
106 lines (75 loc) · 3.62 KB
/
dist_readme.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
_____ _
| __|___ ___ ___ _ _|_|___ ___
| __|_ -| . | _| | | | | . |
|_____|___| _|_| |___|_|_|_|___|
|_|
Copyright 2015 Gordon Williams
http://www.espruino.com
--------------------------------------------------------------
There are a few different binaries in this ZIP file, for different
types of Microcontroller:
espruino_#v##_pico_1r3_cc3000.bin
espruino_#v##_pico_1r3_wiznet.bin
- The firmware image for Espruino Pico Boards.
We'd strongly suggest that you use the Web IDE to flash this.
Each image is for a different type of networking device.
If you don't want a network device, it doesn't matter which you choose.
espruino_#v##_espruino_1r3.bin
espruino_#v##_espruino_1r3_wiznet.bin
- The firmware image for Original Espruino Boards
We'd strongly suggest that you use the Web IDE to flash this.
Each image is for a different type of networking device.
If you don't want a network device, it doesn't matter which you choose.
espruino_#v##_wifi.bin
- The firmware image for Espruino WiFi Boards
We'd strongly suggest that you use the Web IDE to flash this.
espruino_#v##_puckjs.zip
- The firmware image for Espruino Puck.js Devices
See http://www.espruino.com/Puck.js#firmware-updates for more information
espruino_#v##_hystm32_24_ve.bin
- 'HY'STM32F103VET6 ARM with 2.4" LCD display
This is available from eBay
espruino_#v##_hystm32_28_rb.bin
- 'HY'STM32F103RBT6 ARM with 2.8" LCD display
This is available from eBay
espruino_#v##_hystm32_32_vc.bin
- 'HY'STM32F103VCT6 ARM with 3.2" LCD display
This is available from eBay
espruino_#v##_olimexino_stm32.bin
- You will need to overwrite the Maple bootloader to install this.
Espruino is now too large to fit in flash alongside it.
- Olimexino-STM32 Arduino form factor board
- Leaf Labs Maple Arduino form factor board
espruino_#v##_stm32vldiscovery.bin
- STM32VLDISCOVERY board
espruino_#v##_stm32f3discovery.bin
- STM32F3DISCOVERY board
espruino_#v##_stm32f4discovery.bin
- STM32F4DISCOVERY board
espruino_#v##_nucleof401re.bin
- ST NUCLEO-F401RE board
espruino_#v##_nucleof411re.bin
- ST NUCLEO-F411RE board
espruino_#v##_raspberrypi
- Raspberry Pi executable (just copy it to the device and run it)
NOTE: There is GPIO support (which requires you to run Espruino as root)
however there is no Serial, SPI, OneWire or I2C support at the moment so
you're pretty limited!
espruino_#v##_microbit.hex
- Espruino for the BBC micro:bit - just copy this file onto the
flash drive that appears when you plug the micro:bit in.
ESP8266
-------
See http://www.espruino.com/EspruinoESP8266 for more info
espruino_#v##_esp8266_combined_512.bin
- ESP8266 'combined' port for 512k devices like ESP01
Flash with: esptool.py write_flash 0 espruino_#v##_esp8266_combined_512.bin
espruino_#v##_esp8266
- ESP8266 port as separate files - see README in directory for more information
For more information on devices, and on how to flash these binary files on to
each device, please see our website, http://www.espruino.com
NOTES:
* On the STM32F4DISCOVERY the default USART is USART2 (because
USART1 shares some pins with USB). This means you must connect
serial connections to PA2/PA3 NOT PA9/PA10 as you would for
the STM32VLDISCOVERY.