Can I configure the travel speed?

[DolevCP]

Hello,

I started looking for how to custom configure bCNC for my needs and I didn't find any information regarding configuring the travel speed.
I managed to find how to configure specific steps besides the default ones, and now I would like to know if there is a way to customize the travel speed.

Thank you

[Harvie]

Maximum (rapid) travel speed is configured directly in GRBL
Cutting speed is part of the G-Code

Both of these can be configured "through bCNC", but they are not really something that bCNC has to take care of.

[DolevCP]

Can you tell me how can I configure the cutting speed?
If we're both talking about the same thing, which is the speed in which the machine is moving when cutting in the material.

[daxliniere]

This is determined in your gcode, as generated by your CAM software (such as Fusion 360, etc)

[MARIOBASZ]

You can see G code explanación in the web
G0 ;G1 ;G2 ;G3 ; F.

g0 x200 y20 z40
G1 x109 y35 F1200

[MARIOBASZ]

When cutting on the path to be milled, bCNC sets the cutting speed according to the stock / material tabs.
It is the current way, although to choose correctly it should also take into account the material and number of edges of the end mill, cutting strategy