From d0d882f8156652141eedf5ab7fb1949c6ca7c235 Mon Sep 17 00:00:00 2001
From: Virtual Labs IIT Delhi <71967438+vlabsdev-iitd@users.noreply.github.com>
Date: Thu, 22 Feb 2024 15:38:02 +0530
Subject: [PATCH] Update procedure.md

---
 experiment/procedure.md | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/experiment/procedure.md b/experiment/procedure.md
index 37929cc..a90480f 100644
--- a/experiment/procedure.md
+++ b/experiment/procedure.md
@@ -1 +1,21 @@
-### Procedure
\ No newline at end of file
+### Procedure
+
+a) Circuit formulation (Refer Virtual Experiment Slides):
+<br>
+1. Select the correct placement for the highlighted component by “clicking” on the “block”.
+    1. Selection of incorrect block: It becomes RED
+    2. Selection of correct block: Component gets placed
+2. Repeat the above step for all the components to complete the circuit.
+
+b) Operating the circuit: 
+<br>
+1) Set the values of Source Voltage (Vin), Load Resistance (R) and Duty Ratio (D).<br>
+2) Press “RECORD” button to simulate the circuit and observe various waveforms.<br>
+3) Change “Vin, R and D” to observe the waveforms at different operating conditions. <br>
+
+
+c) Performance analysis of the circuit: 
+ <br>
+1) Set the values of Source Voltage (Vin), Load Resistance (R) and Duty Ratio (D).
+2) Select the “ICONS” in sequence to analyse and understand the circuit operation and performance.
+3) Follow the instructions given in respective experiment slide and press the “RECORD” button to fill the observation table.