Skip to content
This repository has been archived by the owner on Aug 28, 2024. It is now read-only.

Latest commit

 

History

History
283 lines (190 loc) · 8.88 KB

setup-dev.md

File metadata and controls

283 lines (190 loc) · 8.88 KB
Raw

Installing dependencies

TL;DR

This is a shorter version of setup guide to make it easier subsequent initializations. If it's the first time you're initializing the workspace, it's recommended that you read the whole guide below, as it provides more context and tips.

If you run on 'clean' Ubuntu on GCP:

# For VMs only! They don't have SSH keys, so we override SSH with HTTPS
git config --global url."https://github.com/".insteadOf [email protected]:
git config --global url."https://".insteadOf git://

# Rust
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
# NVM
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
# All necessary stuff
sudo apt-get update
sudo apt-get install build-essential pkg-config cmake clang lldb lld libssl-dev postgresql apt-transport-https ca-certificates curl software-properties-common
# Install docker
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu focal stable"
sudo apt install docker-ce
sudo usermod -aG docker ${USER}

# Stop default postgres (as we'll use the docker one)
sudo systemctl stop postgresql
sudo systemctl disable postgresql
# Start docker.
sudo systemctl start docker

## You might need to re-connect (due to usermod change).

# Node & yarn
nvm install 20
# Important: there will be a note in the output to load
# new paths in your local session, either run it or reload the terminal.
npm install -g yarn
yarn set version 1.22.19

# For running unit tests
cargo install cargo-nextest
# SQL tools
cargo install sqlx-cli --version 0.8.0

# Foundry
curl -L https://foundry.paradigm.xyz | bash
foundryup --branch master
# You will need to reload your `*rc` file here

# Clone the repo to the desired location
git clone [email protected]:matter-labs/zksync-era.git
cd zksync-era
git submodule update --init --recursive

Don't forget to add env variables and look at tips.

Supported operating systems

ZKsync currently can be launched on any *nix operating system (e.g. any linux distribution or MacOS).

If you're using Windows, then make sure to use WSL 2.

Additionally, if you are going to use WSL 2, make sure that your project is located in the linux filesystem, since accessing NTFS partitions from within WSL is very slow.

If you're using MacOS with an ARM processor (e.g. M1/M2), make sure that you are working in the native environment (e.g. your terminal and IDE don't run in Rosetta, and your toolchain is native). Trying to work with ZKsync code via Rosetta may cause problems that are hard to spot and debug, so make sure to check everything before you start.

If you are a NixOS user or would like to have a reproducible environment, skip to the section about nix.

Docker

Install docker. It is recommended to follow the instructions from the official site.

Note: currently official site proposes using Docker Desktop for Linux, which is a GUI tool with plenty of quirks. If you want to only have CLI tool, you need the docker-ce package and you can follow this guide for Ubuntu.

Installing docker via snap or from the default repository can cause troubles.

You need to install both docker and docker compose.

Note: docker compose is installed automatically with Docker Desktop.

Note: On linux you may encounter the following error when you’ll try to work with zksync:

ERROR: Couldn't connect to Docker daemon - you might need to run `docker-machine start default`.

If so, you do not need to install docker-machine. Most probably, it means that your user is not added to thedocker group. You can check it as follows:

docker-compose up # Should raise the same error.
sudo docker-compose up # Should start doing things.

If the first command fails, but the second succeeds, then you need to add your user to the docker group:

sudo usermod -a -G docker your_user_name

After that, you should logout and login again (user groups are refreshed after the login). The problem should be solved at this step.

If logging out does not resolve the issue, restarting the computer should.

Node & Yarn

  1. Install Node (requires version v20). The recommended way is via nvm.
  2. Install yarn. Can be done via npm install -g yarn. Make sure to get version 1.22.19 - you can change the version by running yarn set version 1.22.19.

clang

In order to compile RocksDB, you must have LLVM available. On debian-based linux it can be installed as follows:

On debian-based linux:

sudo apt-get install build-essential pkg-config cmake clang lldb lld

On mac:

You need to have an up-to-date Xcode. You can install it directly from App Store. With Xcode command line tools, you get the Clang compiler installed by default. Thus, having XCode you don't need to install clang.

OpenSSL

Install OpenSSL:

On mac:

brew install openssl

On debian-based linux:

sudo apt-get install libssl-dev

Rust

Install the latest rust version.

Instructions can be found on the official site.

Verify the rust installation:

rustc --version
rustc 1.xx.y (xxxxxx 20xx-yy-zz) # Output may vary depending on actual version of rust

If you are using MacOS with ARM processor (e.g. M1/M2), make sure that you use an aarch64 toolchain. For example, when you run rustup show, you should see a similar input:

rustup show
Default host: aarch64-apple-darwin
rustup home:  /Users/user/.rustup

installed toolchains
--------------------

...

active toolchain
----------------

1.67.1-aarch64-apple-darwin (overridden by '/Users/user/workspace/zksync-era/rust-toolchain')

If you see x86_64 mentioned in the output, probably you're running (or used to run) your IDE/terminal in Rosetta. If that's the case, you should probably change the way you run terminal, and/or reinstall your IDE, and then reinstall the Rust toolchain as well.

Postgres

Install the latest postgres:

On mac:

brew install postgresql@14

On debian-based linux:

sudo apt-get install postgresql

Cargo nextest

cargo-nextest is the next-generation test runner for Rust projects. zk test rust uses cargo nextest by default.

cargo install cargo-nextest

SQLx CLI

SQLx is a Rust library we use to interact with Postgres, and its CLI is used to manage DB migrations and support several features of the library.

cargo install --locked sqlx-cli --version 0.8.0

Easier method using nix

Nix is a tool that can fetch exactly the right dependencies specified via hashes. The current config is Linux-only but it is likely that it can be adapted to Mac.

Install nix. Enable the nix command and flakes.

Install docker, rustup and use rust to install SQLx CLI like described above. If you are on NixOS, you also need to enable nix-ld.

Go to the zksync folder and run nix develop. After it finishes, you are in a shell that has all the dependencies.

Foundry

Foundry can be utilized for deploying smart contracts. For commands related to deployment, you can pass flags for Foundry integration.

Environment

Edit the lines below and add them to your shell profile file (e.g. ~/.bash_profile, ~/.zshrc):

# Add path here:
export ZKSYNC_HOME=/path/to/zksync

export PATH=$ZKSYNC_HOME/bin:$PATH

Tips

Tip: mold

Optionally, you may want to optimize the build time with the modern linker, mold.

This linker will speed up the build times, which can be pretty big for Rust binaries.

Follow the instructions in the repo in order to install it and enable for Rust.

If you installed mold to /usr/local/bin/mold, then the quickest way to use it without modifying any files is:

export RUSTFLAGS='-C link-arg=-fuse-ld=/usr/local/bin/mold'
export CARGO_TARGET_X86_64_UNKNOWN_LINUX_GNU_LINKER="clang"

Tip: Speeding up building RocksDB

By default, each time you compile rocksdb crate, it will compile required C++ sources from scratch. It can be avoided by using precompiled versions of library, and it will significantly improve your build times.

In order to do so, you can put compiled libraries to some persistent location, and add the following to your shell configuration file (e.g. .zshrc or .bashrc):

export ROCKSDB_LIB_DIR=<library location>
export SNAPPY_LIB_DIR=<library location>

Make sure that compiled libraries match the current version of RocksDB. One way to obtain them, is to compile the project in the usual way once, and then take built libraries from target/{debug,release}/build/librocksdb-sys-{some random value}/out.