configure

#!/bin/sh

export version=0.7.3
export soversion=4

show_help()
{
	cat << EOF
Non-autotool config script for MLT.

Help options:

  --help                  - this information

General build options:

  --prefix=directory      - install prefix for path (default: $prefix)
  --libdir=directory      - lib directory (default: $prefix/lib)
  --datadir=directory     - data directory (default: $prefix/share)
  --mandir=directory      - man documentation directory (default: $prefix/share/man)
  --enable-gpl            - Enable GPL components
  --enable-debug          - Compile without optimizations support (default: off)
  --disable-debug         - Compile without debug support (default: on)
  --disable-mmx           - Compile without MMX support (default: on)
  --disable-sse           - Compile without SSE support (default: on)
  --disable-sse2          - Compile without SSE2 support (default: on)
  --arch='arch'           - Compile for a specific architecture (default: none)
  --cpu='cpu'             - Compile for a specific CPU (default: none)

Module disable options:

EOF

	for i in src/modules/*
	do
		[ -d $i ] && [ "`basename $i`" != "CVS" ] && echo `basename $i` `[ -f $i/gpl ] && echo [GPL]`
	done |
	awk '{ printf( "  --disable-%-14.14s- Disable the %s module %s\n", $1, $1, $2 ); }'

	echo
	echo "  NOTE: libraries marked [GPL] will not be built unless --enable-gpl is stipulated."
	echo
}

build_config()
{
	(
		echo "version=$version"
		echo "soversion=$soversion"
		echo "prefix=$prefix"
		echo "libdir=$libdir"
		echo "bindir=$prefix/bin"
		echo "datadir=$datadir"
		echo "mandir=$mandir"
		echo "targetos=$targetos"

		[ "$mmx" = "true" ] && 
		echo "MMX_FLAGS=-DUSE_MMX"

		[ "$sse" = "true" ] && 
		echo "SSE_FLAGS=-DUSE_SSE"

		[ "$sse2" = "true" ] && 
		echo "SSE2_FLAGS=-DUSE_SSE2"

		[ "$debug" = "true" ] && 
		echo "DEBUG_FLAGS=-g"

		echo "LARGE_FILE=-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"

		[ "$arch" != "" ] && echo "TARGETARCH=-march=$arch"
		[ "$cpu" != "" ] && echo "TARGETCPU=-mcpu=$cpu"
		if [ "$optimisations" = "true" ]
		then
			echo "OPTIMISATIONS=-O2 -pipe"
			# Since gcc 4.6, this optimization enabled with -O1 causes filter_line_sse2 to crash.
			echo "OPTIMISATIONS+=-fno-tree-dominator-opts"
			# Since gcc 4.6, this optimization enabled with -O2 causes filter_line_sse2 to crash.
			echo "OPTIMISATIONS+=-fno-tree-pre"
		fi

		echo "CFLAGS+=-Wall -DPIC \$(TARGETARCH) \$(TARGETCPU) \$(OPTIMISATIONS) \$(MMX_FLAGS) \$(SSE_FLAGS) \$(SSE2_FLAGS) \$(DEBUG_FLAGS) \$(LARGE_FILE)"

		case $targetos in
		Darwin)
		sysctl -a hw | grep "x86_64: 1" > /dev/null && echo "ARCH_X86_64=1" && echo "CFLAGS+=-DARCH_X86_64"
		echo "CFLAGS+=-fPIC -D__DARWIN__ `sdl-config --cflags`"
		echo "SHFLAGS=-dynamiclib"
		echo "LDFLAGS+=`sdl-config --libs`"
		;;
		Linux|GNU/kFreeBSD)
		[ "$(uname -m)" = "x86_64" ] && echo "ARCH_X86_64=1" && echo "CFLAGS+=-DARCH_X86_64"
		[ "$optimisations" = "true" ] &&
			echo "OPTIMISATIONS+=-ffast-math"
		echo "CFLAGS+=-fPIC -pthread"
		echo "SHFLAGS=-shared"
		echo "LIBDL=-ldl"
		echo "RDYNAMIC=-rdynamic"
		echo "LDFLAGS+=-Wl,--no-undefined -Wl,--as-needed"
		;;
		FreeBSD)
		[ "$(uname -m)" = "amd64" -o "$(uname -m)" = "x86_64" ] && echo "ARCH_X86_64=1" && echo "CFLAGS+=-DARCH_X86_64"
		[ "$optimisations" = "true" ] &&
			echo "OPTIMISATIONS+=-ffast-math"
		echo "CFLAGS+=-fPIC -pthread"
		echo "SHFLAGS=-shared"
		echo "RDYNAMIC=-rdynamic"
		echo "LDFLAGS+=-Wl,--no-undefined -Wl,--as-needed"
		;;
		NetBSD)
		[ "$(uname -m)" = "amd64" ] && echo "ARCH_X86_64=1" && echo "CFLAGS+=-DARCH_X86_64"
		[ "$optimisations" = "true" ] &&
			echo "OPTIMISATIONS+=-ffast-math"
		echo "CFLAGS+=-pthread"
		echo "SHFLAGS=-shared"
		echo "RDYNAMIC=-rdynamic"
		echo "LDFLAGS+=-Wl,--no-undefined -Wl,--as-needed"
		;;
		MinGW)
		[ "$(uname -m)" = "x86_64" ] && echo "ARCH_X86_64=1" && echo "CFLAGS+=-DARCH_X86_64"
		[ "$optimisations" = "true" ] &&
			echo "OPTIMISATIONS+=-ffast-math"
		echo "SHFLAGS=-shared"
		echo "LIBDL=-ldl"
		echo "RDYNAMIC="
		echo "LDFLAGS+=-Wl,--no-undefined -Wl,--as-needed"
		;;		
		*)
		;;
		esac
		echo "LIBSUF=$LIBSUF"
	) > config.mak

	echo "#!/bin/sh" > mlt-config
	(
		echo export version=$version
		echo export prefix=$prefix
		echo export libdir=$libdir
		echo export bindir=$prefix/bin
	) >> mlt-config

	cat < mlt-config-template >> mlt-config

	echo -n > packages.dat
}

build_pkgconfig()
{
	echo prefix="$prefix" > mlt-framework.pc
	(
		echo exec_prefix=$prefix
		echo libdir=$libdir
		echo includedir=$prefix/include
		echo datadir=$datadir
		echo mandir=$mandir
		echo version=$version
		echo cflags=`grep ^framework packages.dat | cut -f 2`
		echo libs=`grep ^framework packages.dat | cut -f 3`
	) >> mlt-framework.pc
	cat mlt-framework.pc.in >>mlt-framework.pc

	echo prefix="$prefix" > mlt++.pc
	(
		echo exec_prefix=$prefix
		echo libdir=$libdir
		echo includedir=$prefix/include
		echo datadir=$datadir
		echo mandir=$mandir
		echo version=$version
		echo cflags=`grep ^mlt++ packages.dat | cut -f 2`
		echo libs=`grep ^mlt++ packages.dat | cut -f 3`
	) >> mlt++.pc
	cat mlt++.pc.in >>mlt++.pc
}

# Debug mode
set +x

# Define build directory for scripts called
export build_dir=`dirname $0`
export prefix=/usr/local
export libdir=""
export datadir=""
export mandir=""
export help=0
export optimisations=true
export debug=true
export mmx=true
export sse=true
export sse2=true
export gpl=false
export arch=
export cpu=
export targetos=

# Determine OS
targetos=$(uname -s)
# Chose appropriate suffix for libraries
case $targetos in
	Darwin)
	LIBSUF=".dylib"
	;;
	Linux|FreeBSD|NetBSD)
	LIBSUF=".so"
	;;
	MINGW32_NT-*)
	targetos="MinGW"
	LIBSUF=".dll"
	;;
	*)
	LIBSUF=".so"
	;;
esac
export LIBSUF

# Iterate through arguments
for i in "$@"
do
	case $i in
		--help )			help=1 ;;
		--prefix=* )		prefix="${i#--prefix=}" ;;
		--libdir=* )		libdir="${i#--libdir=}" ;;
		--datadir=* )		datadir="${i#--datadir=}" ;;
		--mandir=* )		mandir="${i#--mandir=}" ;;
		--enable-debug )	optimisations=false ;;
		--disable-debug )	debug=false ;;
		--disable-mmx )		mmx=false; sse=false; sse2=false ;;
		--disable-sse )		sse=false; sse2=false ;;
		--disable-sse2 )	sse2=false ;;
		--enable-gpl )		gpl=true ;;
		--arch=* )			arch="${i#--arch=}" ;;
		--cpu=* )			cpu="${i#--cpu=}" ;;
	esac
done

# Determine the libdir if it's not specified in the args
[ "$libdir" = "" ] && libdir=$prefix/lib
[ "$datadir" = "" ] && datadir=$prefix/share
[ "$mandir" = "" ] && mandir=$prefix/share/man

# Double check MMX (Darwin, Linux and FreeBSD supported, may end up disabling MMX on other platforms incorrectly)
if [ "$mmx" = "true" ]
then
	case $targetos in
		Darwin)
		sysctl -a hw | grep "mmx: 1" > /dev/null || mmx=false
		;;
		Linux)
		grep mmx /proc/cpuinfo > /dev/null 2>&1 || mmx=false
		;;
		FreeBSD)
		[ "$(make -V MACHINE_CPU:Mmmx)" ] || mmx=false
		;;
		*)
		grep mmx /proc/cpuinfo > /dev/null 2>&1 || mmx=false
		;;
	esac
fi

# Double check SSE (Darwin, Linux and FreeBSD supported, may end up disabling SSE on other platforms incorrectly)
if [ "$sse" = "true" ]
then
	case $targetos in
		Darwin)
		sysctl -a hw | grep "sse: 1" > /dev/null || sse=false
		;;
		Linux)
		grep sse /proc/cpuinfo > /dev/null 2>&1 || sse=false
		;;
		FreeBSD)
		[ "$(make -V MACHINE_CPU:Msse)" ] || sse=false
		;;
		*)
		grep sse /proc/cpuinfo > /dev/null 2>&1 || sse=false
		;;
	esac
fi

# Double check SSE2 (Darwin, Linux and FreeBSD supported, may end up disabling SSE2 on other platforms incorrectly)
if [ "$sse2" = "true" ]
then
	case $targetos in
		Darwin)
		sysctl -a hw | grep "sse2: 1" > /dev/null || sse2=false
		;;
		Linux)
		grep sse2 /proc/cpuinfo > /dev/null 2>&1 || sse2=false
		;;
		FreeBSD)
		[ "$(make -V MACHINE_CPU:Msse2)" ] || sse2=false
		;;
		*)
		grep sse2 /proc/cpuinfo > /dev/null 2>&1 || sse2=false
		;;
	esac
fi

# Show help if requested
if [ $help = 1 ]
then
	show_help
else
	# Log the configuration history
	date >> config.log
	echo "$0 $@" >> config.log

	build_config
fi

# Iterate through each of the components
for i in framework modules melt mlt++ swig
do
	if [ -x src/$i/configure ]
	then
		[ $help = 0 ] && echo "Configuring `basename $i`:"
		olddir=`pwd`
		cd src/$i
		./configure "$@"
		[ $? != 0 ] && exit 1
		cd $olddir
	fi
done

# Build the pkg-config files
build_pkgconfig

# Report GPL Usage
[ $help != 1 ] && 
( [ "$gpl" = "false" ] && 
echo "GPL Components are disabled" || 
echo "GPL License Used" )