From e1b988bba630c09564248ebb78cf29c70f2d04db Mon Sep 17 00:00:00 2001 From: Richard Sandiford Date: Wed, 21 Sep 2016 16:49:24 +0100 Subject: [PATCH] [AArch64][SVE 11/32] Tweak aarch64_reg_parse_32_64 interface aarch64_reg_parse_32_64 is currently used to parse address registers, among other things. It returns two bits of information about the register: whether it's W rather than X, and whether it's a zero register. SVE adds addressing modes in which the base or offset can be a vector register instead of a scalar, so a choice between W and X is no longer enough. It's more convenient to pass the type of register around as a qualifier instead. As it happens, two callers of aarch64_reg_parse_32_64 already wanted the information in the form of a qualifier, so the change feels pretty natural even without SVE. Also, the function took two parameters to control whether {W}SP and (W|X)ZR should be accepted. We tend to get slightly better error messages by accepting them regardless and getting the caller to do the check, rather than potentially treating "xzr", "sp" etc. as constants. This is easier to do if the function returns the reg_entry rather than just the register number. This does create a corner case where: .equ sp, 1 ldr w0, [x0, sp] was previously an acceptable way of writing "ldr w0, [x0, #1]", but I don't think it's important to continue supporting that. We already rejected things like: .equ sp, 1 add x0, x1, sp To ensure these new error messages "win" when matching against several candidate instruction entries, we need to use the same address-parsing code for all addresses, including ADDR_SIMPLE and SIMD_ADDR_SIMPLE. The next patch also relies on this. Finally, aarcch64_check_reg_type was written in a pretty conservative way. It should always be equivalent to a single bit test. gas/ * config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register types. (get_reg_expected_msg): Handle them and REG_TYPE_R64_SP. (aarch64_check_reg_type): Simplify. (aarch64_reg_parse_32_64): Return the reg_entry instead of the register number. Return the type as a qualifier rather than an "isreg32" boolean. Remove reject_sp, reject_rz and isregzero parameters. (parse_shifter_operand): Update call to aarch64_parse_32_64_reg. Use get_reg_expected_msg. (parse_address_main): Likewise. Use aarch64_check_reg_type. (po_int_reg_or_fail): Replace reject_sp and reject_rz parameters with a reg_type parameter. Update call to aarch64_parse_32_64_reg. Use aarch64_check_reg_type to test the result. (parse_operands): Update after the above changes. Parse ADDR_SIMPLE addresses normally before enforcing the syntax restrictions. * testsuite/gas/aarch64/diagnostic.s: Add tests for a post-index zero register and for a stack pointer index. * testsuite/gas/aarch64/diagnostic.l: Update accordingly. Also update existing diagnostic messages after the above changes. * testsuite/gas/aarch64/illegal-lse.l: Update the error message for 32-bit register bases. --- gas/ChangeLog | 25 ++ gas/config/tc-aarch64.c | 214 +++++------ gas/testsuite/gas/aarch64/diagnostic.l | 12 +- gas/testsuite/gas/aarch64/diagnostic.s | 3 + gas/testsuite/gas/aarch64/illegal-lse.l | 456 ++++++++++++------------ 5 files changed, 371 insertions(+), 339 deletions(-) diff --git a/gas/ChangeLog b/gas/ChangeLog index 28b12b4323a..e56f239e27f 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,28 @@ +2016-09-21 Richard Sandiford + + * config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register + types. + (get_reg_expected_msg): Handle them and REG_TYPE_R64_SP. + (aarch64_check_reg_type): Simplify. + (aarch64_reg_parse_32_64): Return the reg_entry instead of the + register number. Return the type as a qualifier rather than an + "isreg32" boolean. Remove reject_sp, reject_rz and isregzero + parameters. + (parse_shifter_operand): Update call to aarch64_parse_32_64_reg. + Use get_reg_expected_msg. + (parse_address_main): Likewise. Use aarch64_check_reg_type. + (po_int_reg_or_fail): Replace reject_sp and reject_rz parameters + with a reg_type parameter. Update call to aarch64_parse_32_64_reg. + Use aarch64_check_reg_type to test the result. + (parse_operands): Update after the above changes. Parse ADDR_SIMPLE + addresses normally before enforcing the syntax restrictions. + * testsuite/gas/aarch64/diagnostic.s: Add tests for a post-index + zero register and for a stack pointer index. + * testsuite/gas/aarch64/diagnostic.l: Update accordingly. + Also update existing diagnostic messages after the above changes. + * testsuite/gas/aarch64/illegal-lse.l: Update the error message + for 32-bit register bases. + 2016-09-21 Richard Sandiford * config/tc-aarch64.c (parse_aarch64_imm_float): Remove range check. diff --git a/gas/config/tc-aarch64.c b/gas/config/tc-aarch64.c index 2489d5bc1d2..7b5be8b2f99 100644 --- a/gas/config/tc-aarch64.c +++ b/gas/config/tc-aarch64.c @@ -265,16 +265,22 @@ struct reloc_entry BASIC_REG_TYPE(FP_Q) /* q[0-31] */ \ BASIC_REG_TYPE(CN) /* c[0-7] */ \ BASIC_REG_TYPE(VN) /* v[0-31] */ \ - /* Typecheck: any 64-bit int reg (inc SP exc XZR) */ \ + /* Typecheck: any 64-bit int reg (inc SP exc XZR). */ \ MULTI_REG_TYPE(R64_SP, REG_TYPE(R_64) | REG_TYPE(SP_64)) \ - /* Typecheck: any int (inc {W}SP inc [WX]ZR) */ \ + /* Typecheck: x[0-30], w[0-30] or [xw]zr. */ \ + MULTI_REG_TYPE(R_Z, REG_TYPE(R_32) | REG_TYPE(R_64) \ + | REG_TYPE(Z_32) | REG_TYPE(Z_64)) \ + /* Typecheck: x[0-30], w[0-30] or {w}sp. */ \ + MULTI_REG_TYPE(R_SP, REG_TYPE(R_32) | REG_TYPE(R_64) \ + | REG_TYPE(SP_32) | REG_TYPE(SP_64)) \ + /* Typecheck: any int (inc {W}SP inc [WX]ZR). */ \ MULTI_REG_TYPE(R_Z_SP, REG_TYPE(R_32) | REG_TYPE(R_64) \ | REG_TYPE(SP_32) | REG_TYPE(SP_64) \ | REG_TYPE(Z_32) | REG_TYPE(Z_64)) \ /* Typecheck: any [BHSDQ]P FP. */ \ MULTI_REG_TYPE(BHSDQ, REG_TYPE(FP_B) | REG_TYPE(FP_H) \ | REG_TYPE(FP_S) | REG_TYPE(FP_D) | REG_TYPE(FP_Q)) \ - /* Typecheck: any int or [BHSDQ]P FP or V reg (exc SP inc [WX]ZR) */ \ + /* Typecheck: any int or [BHSDQ]P FP or V reg (exc SP inc [WX]ZR). */ \ MULTI_REG_TYPE(R_Z_BHSDQ_V, REG_TYPE(R_32) | REG_TYPE(R_64) \ | REG_TYPE(Z_32) | REG_TYPE(Z_64) | REG_TYPE(VN) \ | REG_TYPE(FP_B) | REG_TYPE(FP_H) \ @@ -344,6 +350,15 @@ get_reg_expected_msg (aarch64_reg_type reg_type) case REG_TYPE_R_N: msg = N_("integer register expected"); break; + case REG_TYPE_R64_SP: + msg = N_("64-bit integer or SP register expected"); + break; + case REG_TYPE_R_Z: + msg = N_("integer or zero register expected"); + break; + case REG_TYPE_R_SP: + msg = N_("integer or SP register expected"); + break; case REG_TYPE_R_Z_SP: msg = N_("integer, zero or SP register expected"); break; @@ -390,9 +405,6 @@ get_reg_expected_msg (aarch64_reg_type reg_type) /* Instructions take 4 bytes in the object file. */ #define INSN_SIZE 4 -/* Define some common error messages. */ -#define BAD_SP _("SP not allowed here") - static struct hash_control *aarch64_ops_hsh; static struct hash_control *aarch64_cond_hsh; static struct hash_control *aarch64_shift_hsh; @@ -671,72 +683,45 @@ parse_reg (char **ccp) static bfd_boolean aarch64_check_reg_type (const reg_entry *reg, aarch64_reg_type type) { - if (reg->type == type) - return TRUE; - - switch (type) - { - case REG_TYPE_R64_SP: /* 64-bit integer reg (inc SP exc XZR). */ - case REG_TYPE_R_Z_SP: /* Integer reg (inc {X}SP inc [WX]ZR). */ - case REG_TYPE_R_Z_BHSDQ_V: /* Any register apart from Cn. */ - case REG_TYPE_BHSDQ: /* Any [BHSDQ]P FP or SIMD scalar register. */ - case REG_TYPE_VN: /* Vector register. */ - gas_assert (reg->type < REG_TYPE_MAX && type < REG_TYPE_MAX); - return ((reg_type_masks[reg->type] & reg_type_masks[type]) - == reg_type_masks[reg->type]); - default: - as_fatal ("unhandled type %d", type); - abort (); - } + return (reg_type_masks[type] & (1 << reg->type)) != 0; } -/* Parse a register and return PARSE_FAIL if the register is not of type R_Z_SP. - Return the register number otherwise. *ISREG32 is set to one if the - register is 32-bit wide; *ISREGZERO is set to one if the register is - of type Z_32 or Z_64. +/* Try to parse a base or offset register. Return the register entry + on success, setting *QUALIFIER to the register qualifier. Return null + otherwise. + Note that this function does not issue any diagnostics. */ -static int -aarch64_reg_parse_32_64 (char **ccp, int reject_sp, int reject_rz, - int *isreg32, int *isregzero) +static const reg_entry * +aarch64_reg_parse_32_64 (char **ccp, aarch64_opnd_qualifier_t *qualifier) { char *str = *ccp; const reg_entry *reg = parse_reg (&str); if (reg == NULL) - return PARSE_FAIL; - - if (! aarch64_check_reg_type (reg, REG_TYPE_R_Z_SP)) - return PARSE_FAIL; + return NULL; switch (reg->type) { + case REG_TYPE_R_32: case REG_TYPE_SP_32: - case REG_TYPE_SP_64: - if (reject_sp) - return PARSE_FAIL; - *isreg32 = reg->type == REG_TYPE_SP_32; - *isregzero = 0; + case REG_TYPE_Z_32: + *qualifier = AARCH64_OPND_QLF_W; break; - case REG_TYPE_R_32: + case REG_TYPE_R_64: - *isreg32 = reg->type == REG_TYPE_R_32; - *isregzero = 0; - break; - case REG_TYPE_Z_32: + case REG_TYPE_SP_64: case REG_TYPE_Z_64: - if (reject_rz) - return PARSE_FAIL; - *isreg32 = reg->type == REG_TYPE_Z_32; - *isregzero = 1; + *qualifier = AARCH64_OPND_QLF_X; break; + default: - return PARSE_FAIL; + return NULL; } *ccp = str; - return reg->number; + return reg; } /* Parse the qualifier of a SIMD vector register or a SIMD vector element. @@ -3032,13 +3017,13 @@ static bfd_boolean parse_shifter_operand (char **str, aarch64_opnd_info *operand, enum parse_shift_mode mode) { - int reg; - int isreg32, isregzero; + const reg_entry *reg; + aarch64_opnd_qualifier_t qualifier; enum aarch64_operand_class opd_class = aarch64_get_operand_class (operand->type); - if ((reg = - aarch64_reg_parse_32_64 (str, 0, 0, &isreg32, &isregzero)) != PARSE_FAIL) + reg = aarch64_reg_parse_32_64 (str, &qualifier); + if (reg) { if (opd_class == AARCH64_OPND_CLASS_IMMEDIATE) { @@ -3046,14 +3031,14 @@ parse_shifter_operand (char **str, aarch64_opnd_info *operand, return FALSE; } - if (!isregzero && reg == REG_SP) + if (!aarch64_check_reg_type (reg, REG_TYPE_R_Z)) { - set_syntax_error (BAD_SP); + set_syntax_error (_(get_reg_expected_msg (REG_TYPE_R_Z))); return FALSE; } - operand->reg.regno = reg; - operand->qualifier = isreg32 ? AARCH64_OPND_QLF_W : AARCH64_OPND_QLF_X; + operand->reg.regno = reg->number; + operand->qualifier = qualifier; /* Accept optional shift operation on register. */ if (! skip_past_comma (str)) @@ -3192,8 +3177,9 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, int accept_reg_post_index) { char *p = *str; - int reg; - int isreg32, isregzero; + const reg_entry *reg; + aarch64_opnd_qualifier_t base_qualifier; + aarch64_opnd_qualifier_t offset_qualifier; expressionS *exp = &inst.reloc.exp; if (! skip_past_char (&p, '[')) @@ -3270,14 +3256,13 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, /* [ */ - /* Accept SP and reject ZR */ - reg = aarch64_reg_parse_32_64 (&p, 0, 1, &isreg32, &isregzero); - if (reg == PARSE_FAIL || isreg32) + reg = aarch64_reg_parse_32_64 (&p, &base_qualifier); + if (!reg || !aarch64_check_reg_type (reg, REG_TYPE_R64_SP)) { - set_syntax_error (_(get_reg_expected_msg (REG_TYPE_R_64))); + set_syntax_error (_(get_reg_expected_msg (REG_TYPE_R64_SP))); return FALSE; } - operand->addr.base_regno = reg; + operand->addr.base_regno = reg->number; /* [Xn */ if (skip_past_comma (&p)) @@ -3285,12 +3270,17 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, /* [Xn, */ operand->addr.preind = 1; - /* Reject SP and accept ZR */ - reg = aarch64_reg_parse_32_64 (&p, 1, 0, &isreg32, &isregzero); - if (reg != PARSE_FAIL) + reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier); + if (reg) { + if (!aarch64_check_reg_type (reg, REG_TYPE_R_Z)) + { + set_syntax_error (_(get_reg_expected_msg (REG_TYPE_R_Z))); + return FALSE; + } + /* [Xn,Rm */ - operand->addr.offset.regno = reg; + operand->addr.offset.regno = reg->number; operand->addr.offset.is_reg = 1; /* Shifted index. */ if (skip_past_comma (&p)) @@ -3309,13 +3299,13 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, || operand->shifter.kind == AARCH64_MOD_LSL || operand->shifter.kind == AARCH64_MOD_SXTX) { - if (isreg32) + if (offset_qualifier == AARCH64_OPND_QLF_W) { set_syntax_error (_("invalid use of 32-bit register offset")); return FALSE; } } - else if (!isreg32) + else if (offset_qualifier == AARCH64_OPND_QLF_X) { set_syntax_error (_("invalid use of 64-bit register offset")); return FALSE; @@ -3399,16 +3389,16 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, } if (accept_reg_post_index - && (reg = aarch64_reg_parse_32_64 (&p, 1, 1, &isreg32, - &isregzero)) != PARSE_FAIL) + && (reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier))) { /* [Xn],Xm */ - if (isreg32) + if (!aarch64_check_reg_type (reg, REG_TYPE_R_64)) { - set_syntax_error (_("invalid 32-bit register offset")); + set_syntax_error (_(get_reg_expected_msg (REG_TYPE_R_64))); return FALSE; } - operand->addr.offset.regno = reg; + + operand->addr.offset.regno = reg->number; operand->addr.offset.is_reg = 1; } else if (! my_get_expression (exp, &p, GE_OPT_PREFIX, 1)) @@ -3723,19 +3713,15 @@ parse_sys_ins_reg (char **str, struct hash_control *sys_ins_regs) } \ } while (0) -#define po_int_reg_or_fail(reject_sp, reject_rz) do { \ - val = aarch64_reg_parse_32_64 (&str, reject_sp, reject_rz, \ - &isreg32, &isregzero); \ - if (val == PARSE_FAIL) \ +#define po_int_reg_or_fail(reg_type) do { \ + reg = aarch64_reg_parse_32_64 (&str, &qualifier); \ + if (!reg || !aarch64_check_reg_type (reg, reg_type)) \ { \ set_default_error (); \ goto failure; \ } \ - info->reg.regno = val; \ - if (isreg32) \ - info->qualifier = AARCH64_OPND_QLF_W; \ - else \ - info->qualifier = AARCH64_OPND_QLF_X; \ + info->reg.regno = reg->number; \ + info->qualifier = qualifier; \ } while (0) #define po_imm_nc_or_fail() do { \ @@ -4993,10 +4979,11 @@ parse_operands (char *str, const aarch64_opcode *opcode) for (i = 0; operands[i] != AARCH64_OPND_NIL; i++) { int64_t val; - int isreg32, isregzero; + const reg_entry *reg; int comma_skipped_p = 0; aarch64_reg_type rtype; struct vector_type_el vectype; + aarch64_opnd_qualifier_t qualifier; aarch64_opnd_info *info = &inst.base.operands[i]; DEBUG_TRACE ("parse operand %d", i); @@ -5032,12 +5019,12 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_Ra: case AARCH64_OPND_Rt_SYS: case AARCH64_OPND_PAIRREG: - po_int_reg_or_fail (1, 0); + po_int_reg_or_fail (REG_TYPE_R_Z); break; case AARCH64_OPND_Rd_SP: case AARCH64_OPND_Rn_SP: - po_int_reg_or_fail (0, 1); + po_int_reg_or_fail (REG_TYPE_R_SP); break; case AARCH64_OPND_Rm_EXT: @@ -5498,24 +5485,39 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_ADDR_SIMPLE: case AARCH64_OPND_SIMD_ADDR_SIMPLE: - /* [{, #}] */ - po_char_or_fail ('['); - po_reg_or_fail (REG_TYPE_R64_SP); - /* Accept optional ", #0". */ - if (operands[i] == AARCH64_OPND_ADDR_SIMPLE - && skip_past_char (&str, ',')) - { - skip_past_char (&str, '#'); - if (! skip_past_char (&str, '0')) - { - set_fatal_syntax_error - (_("the optional immediate offset can only be 0")); - goto failure; - } - } - po_char_or_fail (']'); - info->addr.base_regno = val; - break; + { + /* [{, #}] */ + char *start = str; + /* First use the normal address-parsing routines, to get + the usual syntax errors. */ + po_misc_or_fail (parse_address (&str, info, 0)); + if (info->addr.pcrel || info->addr.offset.is_reg + || !info->addr.preind || info->addr.postind + || info->addr.writeback) + { + set_syntax_error (_("invalid addressing mode")); + goto failure; + } + + /* Then retry, matching the specific syntax of these addresses. */ + str = start; + po_char_or_fail ('['); + po_reg_or_fail (REG_TYPE_R64_SP); + /* Accept optional ", #0". */ + if (operands[i] == AARCH64_OPND_ADDR_SIMPLE + && skip_past_char (&str, ',')) + { + skip_past_char (&str, '#'); + if (! skip_past_char (&str, '0')) + { + set_fatal_syntax_error + (_("the optional immediate offset can only be 0")); + goto failure; + } + } + po_char_or_fail (']'); + break; + } case AARCH64_OPND_ADDR_REGOFF: /* [, {, {}}] */ diff --git a/gas/testsuite/gas/aarch64/diagnostic.l b/gas/testsuite/gas/aarch64/diagnostic.l index 67ef484b7b7..ef2357759f3 100644 --- a/gas/testsuite/gas/aarch64/diagnostic.l +++ b/gas/testsuite/gas/aarch64/diagnostic.l @@ -54,7 +54,7 @@ [^:]*:56: Error: operand 2 should be a floating-point register -- `fcmp d0,x0' [^:]*:57: Error: immediate zero expected at operand 3 -- `cmgt v0.4s,v2.4s,#1' [^:]*:58: Error: unexpected characters following instruction at operand 2 -- `fmov d3,1.00,lsl#3' -[^:]*:59: Error: writeback value should be an immediate constant at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],sp' +[^:]*:59: Error: integer 64-bit register expected at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],sp' [^:]*:60: Error: writeback value should be an immediate constant at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],zr' [^:]*:61: Error: invalid shift for the register offset addressing mode at operand 2 -- `ldr q0,\[x0,w0,lsr#4\]' [^:]*:62: Error: only 'LSL' shift is permitted at operand 3 -- `adds x1,sp,2134,uxtw#12' @@ -116,10 +116,10 @@ [^:]*:125: Warning: unpredictable transfer with writeback -- `ldp x0,x1,\[x1\],#16' [^:]*:126: Error: this relocation modifier is not allowed on this instruction at operand 2 -- `adr x2,:got:s1' [^:]*:127: Error: this relocation modifier is not allowed on this instruction at operand 2 -- `ldr x0,\[x0,:got:s1\]' -[^:]*:130: Error: integer 64-bit register expected at operand 2 -- `ldr x1,\[wsp,#8\]!' -[^:]*:131: Error: integer 64-bit register expected at operand 3 -- `ldp x6,x29,\[w7,#8\]!' -[^:]*:132: Error: integer 64-bit register expected at operand 2 -- `str x30,\[w11,#8\]!' -[^:]*:133: Error: integer 64-bit register expected at operand 3 -- `stp x8,x27,\[wsp,#8\]!' +[^:]*:130: Error: 64-bit integer or SP register expected at operand 2 -- `ldr x1,\[wsp,#8\]!' +[^:]*:131: Error: 64-bit integer or SP register expected at operand 3 -- `ldp x6,x29,\[w7,#8\]!' +[^:]*:132: Error: 64-bit integer or SP register expected at operand 2 -- `str x30,\[w11,#8\]!' +[^:]*:133: Error: 64-bit integer or SP register expected at operand 3 -- `stp x8,x27,\[wsp,#8\]!' [^:]*:213: Error: register element index out of range 0 to 1 at operand 2 -- `dup v0\.2d,v1\.2d\[-1\]' [^:]*:216: Error: register element index out of range 0 to 1 at operand 2 -- `dup v0\.2d,v1\.2d\[2\]' [^:]*:217: Error: register element index out of range 0 to 1 at operand 2 -- `dup v0\.2d,v1\.2d\[64\]' @@ -148,3 +148,5 @@ [^:]*:262: Error: invalid floating-point constant at operand 2 -- `fmov d0,#-2' [^:]*:263: Error: invalid floating-point constant at operand 2 -- `fmov s0,2' [^:]*:264: Error: invalid floating-point constant at operand 2 -- `fmov s0,-2' +[^:]*:266: Error: integer 64-bit register expected at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],xzr' +[^:]*:267: Error: integer or zero register expected at operand 2 -- `str x1,\[x2,sp\]' diff --git a/gas/testsuite/gas/aarch64/diagnostic.s b/gas/testsuite/gas/aarch64/diagnostic.s index 3092b9b7ca1..8dbb5422334 100644 --- a/gas/testsuite/gas/aarch64/diagnostic.s +++ b/gas/testsuite/gas/aarch64/diagnostic.s @@ -262,3 +262,6 @@ fmov d0, #-2 fmov s0, 2 fmov s0, -2 + + st2 {v0.4s, v1.4s}, [sp], xzr + str x1, [x2, sp] diff --git a/gas/testsuite/gas/aarch64/illegal-lse.l b/gas/testsuite/gas/aarch64/illegal-lse.l index ed70065281a..dd57f99ed73 100644 --- a/gas/testsuite/gas/aarch64/illegal-lse.l +++ b/gas/testsuite/gas/aarch64/illegal-lse.l @@ -1,433 +1,433 @@ [^:]*: Assembler messages: [^:]*:68: Error: operand mismatch -- `cas w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `cas w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `cas w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casa w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casa w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casa w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casl w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casl w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casl w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casal w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casal w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casal w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casb w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casb w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casb w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `cash w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `cash w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `cash w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casab w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casab w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casab w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `caslb w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `caslb w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `caslb w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casalb w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casalb w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casalb w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casah w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casah w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casah w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `caslh w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `caslh w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `caslh w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casalh w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casalh w2,w3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casalh w2,w3,\[w4\]' [^:]*:68: Error: operand mismatch -- `cas w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `cas x2,x3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `cas x2,x3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casa w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casa x2,x3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casa x2,x3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casl w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casl x2,x3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casl x2,x3,\[w4\]' [^:]*:68: Error: operand mismatch -- `casal w0,x1,\[x2\]' -[^:]*:68: Error: operand 3 should be an address with base register \(no offset\) -- `casal x2,x3,\[w4\]' +[^:]*:68: Error: 64-bit integer or SP register expected at operand 3 -- `casal x2,x3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swp w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swp w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swp w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpa w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpa w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpa w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpl w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpl w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpl w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpal w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpal w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpal w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpb w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpb w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpb w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swph w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swph w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swph w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpab w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpab w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpab w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swplb w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swplb w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swplb w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpalb w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpalb w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpalb w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpah w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpah w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpah w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swplh w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swplh w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swplh w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpalh w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpalh w2,w3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpalh w2,w3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swp w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swp x2,x3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swp x2,x3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpa w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpa x2,x3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpa x2,x3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpl w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpl x2,x3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpl x2,x3,\[w4\]' [^:]*:69: Error: operand mismatch -- `swpal w0,x1,\[x2\]' -[^:]*:69: Error: operand 3 should be an address with base register \(no offset\) -- `swpal x2,x3,\[w4\]' +[^:]*:69: Error: 64-bit integer or SP register expected at operand 3 -- `swpal x2,x3,\[w4\]' [^:]*:70: Error: reg pair must start from even reg at operand 1 -- `casp w1,w1,w2,w3,\[x5\]' [^:]*:70: Error: reg pair must be contiguous at operand 2 -- `casp w4,w4,w6,w7,\[sp\]' [^:]*:70: Error: operand mismatch -- `casp w0,x1,x2,x3,\[x2\]' -[^:]*:70: Error: operand 5 should be an address with base register \(no offset\) -- `casp x4,x5,x6,x7,\[w8\]' +[^:]*:70: Error: 64-bit integer or SP register expected at operand 5 -- `casp x4,x5,x6,x7,\[w8\]' [^:]*:70: Error: reg pair must start from even reg at operand 1 -- `caspa w1,w1,w2,w3,\[x5\]' [^:]*:70: Error: reg pair must be contiguous at operand 2 -- `caspa w4,w4,w6,w7,\[sp\]' [^:]*:70: Error: operand mismatch -- `caspa w0,x1,x2,x3,\[x2\]' -[^:]*:70: Error: operand 5 should be an address with base register \(no offset\) -- `caspa x4,x5,x6,x7,\[w8\]' +[^:]*:70: Error: 64-bit integer or SP register expected at operand 5 -- `caspa x4,x5,x6,x7,\[w8\]' [^:]*:70: Error: reg pair must start from even reg at operand 1 -- `caspl w1,w1,w2,w3,\[x5\]' [^:]*:70: Error: reg pair must be contiguous at operand 2 -- `caspl w4,w4,w6,w7,\[sp\]' [^:]*:70: Error: operand mismatch -- `caspl w0,x1,x2,x3,\[x2\]' -[^:]*:70: Error: operand 5 should be an address with base register \(no offset\) -- `caspl x4,x5,x6,x7,\[w8\]' +[^:]*:70: Error: 64-bit integer or SP register expected at operand 5 -- `caspl x4,x5,x6,x7,\[w8\]' [^:]*:70: Error: reg pair must start from even reg at operand 1 -- `caspal w1,w1,w2,w3,\[x5\]' [^:]*:70: Error: reg pair must be contiguous at operand 2 -- `caspal w4,w4,w6,w7,\[sp\]' [^:]*:70: Error: operand mismatch -- `caspal w0,x1,x2,x3,\[x2\]' -[^:]*:70: Error: operand 5 should be an address with base register \(no offset\) -- `caspal x4,x5,x6,x7,\[w8\]' +[^:]*:70: Error: 64-bit integer or SP register expected at operand 5 -- `caspal x4,x5,x6,x7,\[w8\]' [^:]*:71: Error: operand mismatch -- `ldadd w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldadd w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldadd w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldadda w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldadda w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldadda w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldadd w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldadd x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldadd x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldadda w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldadda x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldadda x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldaddal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldaddal x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldaddal x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclr w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclr w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclr w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclra w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclra w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclra w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclral w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclral w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclral w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclralb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclralb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclralb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclralh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclralh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclralh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclr w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclr x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclr x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclra w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclra x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclra x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclrl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclrl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclrl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldclral w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldclral x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldclral x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeor w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeor w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeor w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeora w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeora w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeora w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeoral w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeoral w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeoral w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeoralb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeoralb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeoralb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeoralh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeoralh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeoralh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeor w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeor x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeor x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeora w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeora x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeora x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeorl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeorl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeorl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldeoral w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldeoral x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldeoral x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldset w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldset w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldset w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldseta w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldseta w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldseta w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldseth w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldseth w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldseth w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldset w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldset x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldset x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldseta w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldseta x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldseta x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsetal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsetal x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsetal x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmax w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmax w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmax w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxa w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxa w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxa w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmax w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmax x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmax x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxa w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxa x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxa x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmaxal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmaxal x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmaxal x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmin w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmin w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmin w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmina w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmina w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmina w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmin w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmin x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmin x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsmina w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsmina x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsmina x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldsminal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldsminal x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldsminal x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumax w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumax w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumax w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxa w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxa w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxa w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumax w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumax x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumax x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxa w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxa x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxa x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumaxal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumaxal x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumaxal x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumin w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumin w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumin w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumina w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumina w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumina w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminl w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminl w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminal w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminal w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminab w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminab w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminab w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminlb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminlb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminlb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminalb w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminalb w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminalb w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminah w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminah w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminah w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminlh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminlh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminlh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminalh w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminalh w2,w3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminalh w2,w3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumin w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumin x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumin x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `ldumina w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `ldumina x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `ldumina x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminl w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminl x2,x3,\[w4\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminl x2,x3,\[w4\]' [^:]*:71: Error: operand mismatch -- `lduminal w0,x1,\[x2\]' -[^:]*:71: Error: operand 3 should be an address with base register \(no offset\) -- `lduminal x2,x3,\[w4\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stadd w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddl w2,\[w3\]' +[^:]*:71: Error: 64-bit integer or SP register expected at operand 3 -- `lduminal x2,x3,\[w4\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stadd w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `staddb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `staddh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `staddlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `staddlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stadd x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `staddl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclr w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stadd x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `staddl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclr w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stclrb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stclrh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stclrlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stclrlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclr x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stclrl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steor w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclr x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stclrl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steor w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `steorb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `steorh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `steorlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `steorlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steor x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `steorl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stset w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsetl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steor x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `steorl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stset w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsetl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsetb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsetb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsetb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stseth x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stseth w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stseth w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsetlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsetlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsetlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsetlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsetlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stset x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsetl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmax w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsetlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stset x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsetl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmax w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsmaxb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsmaxh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsmaxlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsmaxlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmax x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmaxl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmin w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmax x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmaxl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmin w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsminb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsminh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsminlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stsminlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsmin x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stsminl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumax w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsmin x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stsminl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumax w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stumaxb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stumaxh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stumaxlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stumaxlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumax x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumaxl x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumin w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminl w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumax x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumaxl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumin w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminl w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stuminb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stuminh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminh w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stuminlb x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminlb w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminlb w2,\[w3\]' [^:]*:72: Error: operand mismatch -- `stuminlh x0,\[x2\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminlh w2,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stumin x0,\[w3\]' -[^:]*:72: Error: operand 2 should be an address with base register \(no offset\) -- `stuminl x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminlh w2,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stumin x0,\[w3\]' +[^:]*:72: Error: 64-bit integer or SP register expected at operand 2 -- `stuminl x0,\[w3\]'