diff --git a/README.md b/README.md index fc1a068a..0fde6f0b 100644 --- a/README.md +++ b/README.md @@ -80,31 +80,11 @@ In some VHF Radios is only an 1 MByte SPI Flash installed. * RT3 = MD-380 (old) * RT8 = MD-390G -### The md380tools have D13.020 as basic now. ### - - -to build the "old" d02.32 version - - make flash_D02 - -These tools are all wrapped into `Makefile`, which will download the -official firmware, patch and flash it. Run `make flash` after booting -into the recovery bootloader by holding PTT and the button just above -it during power-on. Once device has been powered on, run `make flashdb` -to write the DMR MARC user's database to SPI Flash memory. This works only -with Radios that have 16 MByte SPI Flash memory chip installed. - - ## License: ## -The majority of this software is licensed in exchange for two liters -of India Pale Ale, to be delivered at a neighborly bar, preferably one -without a god-damned squary-stary-box. - -The DFU tools are GPL licensed, forked from old examples in the -Ubertooth Project. If you want md380-dfu or stm32-dfu under different -terms, you should probably discuss it with the Great Scott Gadgets -folks over some beer. +This software is licensed in exchange for two liters of India Pale +Ale, to be delivered at a neighborly bar, preferably one without +televisions. Tytera's firmware is of unknown license and is not included in this repository. We use a heap-less printf library under the BSD license.