A breakout for the classic MMA8452Q with I2C connector for ease of use.

The SparkFun TSH82 Configurable OpAmp Board was designed to give you the best combination of performance and flexibility that we could achieve by giving you two gain stages, each one independently accessible on the header pins.

The APA102-2020 LuMini rings are a great way to add high density light rings to your project.

The GridEYE from Panasonic is a 8 by 8 thermopile array. This means you have an array of 64 pixels each capable of detecting temperature remotely. It’s like having thermal camera (or Predator’s vision) just in really low resolution.

A small, rectangular board equipped with 9x APA102C LEDs arranged in a 3x3 array.

The Noisy Cricket is a 300mW stereo amplifier which can be configured to output up to 1.5W of mono amplification.

Hardware repo for the SparkFun Clock Generator 5P49V60 (Qwiic) breakout board. The board offers a wide range of customizable frequencies in a wide range of different signal types using a single reference clock.

Example code using parts from the MicroMod Qwiic Pro Kit and Qwiic Pro Kit.

Simple LilyPad sewable mount for magnetically activated reed switch

This is a breakout board for the glass ferrule type fuse.

A small quarter-circle board equipped with 3x APA102C LEDs and a single mounting position.

An I2C based capacitive touch slider with three separate touch pads

A coin-sized board equipped with 7x APA102C LEDs surrounding the outer edge of the board, with 1x in the center.

2 meter time of flight Qwiic breakout of the RFD77402

Lipo Charger Basic product 10217