A simple AVR driver for controller I2C communication with the ATtiny85.

A simple program for controlling a PWM fan from a microcontroller with Rust

Digispark ATTINY85 USB Development Board Design Using Altium Designer

👽 Template and Examples in C for AVR Microcontrollers, optionally built via Docker. WS2812B driver inside.

This project can be used to turn off the cooling fan of a car with a delay

A Christmas tree ornament based on the ATtiny85

Fork for the firmware / digispark part of the micronucleus repository

a minimalist watch using 12 LEDs based on ATtiny85

Improved version of Daniel C's Tiny invaders v3.1

An Arduino library to drive TM1638 seven segment modules.

ATtiny85 based custom PCB & software for driving NeoPixels with Christmas ornament application.

Driver for LCD displays running on Arduino/Avr/ESP32/Linux (including Rasperry) platforms

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070

A resource-conscious neural network implementation for MCUs

AVR programmer for Linux / Raspberry Pi, that uses SPI sysfs.

Arduino sketch that turns an ATtiny25/45/85 into a simple I2C PWM generator to control LEDs

Issues an alarm, if window is open for more than 5 minutes. Arduino sketch for ATtiny85. Battery operated (6 microAmpere).

A 4x4x4 LED cube based on ATtiny85 and MAX7219, with SD card support

dont burn the pump in your water fountain for cats