Makefile.in

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Copyright 2005  Red Hat, Inc.
#
#  Permission to use, copy, modify, distribute, and sell this software and its
#  documentation for any purpose is hereby granted without fee, provided that
#  the above copyright notice appear in all copies and that both that
#  copyright notice and this permission notice appear in supporting
#  documentation, and that the name of Red Hat not be used in
#  advertising or publicity pertaining to distribution of the software without
#  specific, written prior permission.  Red Hat makes no
#  representations about the suitability of this software for any purpose.  It
#  is provided "as is" without express or implied warranty.
#
#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
#  PERFORMANCE OF THIS SOFTWARE.

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = luit$(EXEEXT)
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
		$(srcdir)/Makefile.in $(srcdir)/config.h.in \
		$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
		config.sub depcomp install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
		$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
		$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
PROGRAMS = $(bin_PROGRAMS)
am_luit_OBJECTS = charset.$(OBJEXT) iso2022.$(OBJEXT) locale.$(OBJEXT) \
		luit.$(OBJEXT) other.$(OBJEXT) parser.$(OBJEXT) sys.$(OBJEXT)
luit_OBJECTS = $(am_luit_OBJECTS)
am__DEPENDENCIES_1 =
luit_DEPENDENCIES = $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
		$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo "  CC	" $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo "  CCLD  " $@;
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
SOURCES = $(luit_SOURCES)
DIST_SOURCES = $(luit_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
		html-recursive info-recursive install-data-recursive \
		install-dvi-recursive install-exec-recursive \
		install-html-recursive install-info-recursive \
		install-pdf-recursive install-ps-recursive install-recursive \
		installcheck-recursive installdirs-recursive pdf-recursive \
		ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive		\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
		$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
		distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d "$(distdir)" \
	|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
		&& rm -fr "$(distdir)"; }; }
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
	first=`echo "$$dir1" | sed -e "$$sed_first"`; \
	if test "$$first" != "."; then \
	if test "$$first" = ".."; then \
		dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
		dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
	else \
		first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
		if test "$$first2" = "$$first"; then \
		dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
		else \
		dir2="../$$dir2"; \
		fi; \
		dir0="$$dir0"/"$$first"; \
	fi; \
	fi; \
	dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASE_CFLAGS = @BASE_CFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHANGELOG_CMD = @CHANGELOG_CMD@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CWARNFLAGS = @CWARNFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_CMD = @INSTALL_CMD@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_MAN_DIR = @LIB_MAN_DIR@
LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LOCALEALIASFILE = @LOCALEALIASFILE@
LTLIBOBJS = @LTLIBOBJS@
LUIT_CFLAGS = @LUIT_CFLAGS@
LUIT_LIBS = @LUIT_LIBS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAN_SUBSTS = @MAN_SUBSTS@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
OS_CFLAGS = @OS_CFLAGS@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRICT_CFLAGS = @STRICT_CFLAGS@
STRIP = @STRIP@
VERSION = @VERSION@
XORG_MAN_PAGE = @XORG_MAN_PAGE@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = man
AM_CFLAGS = \
		$(CWARNFLAGS)		\
		$(LUIT_CFLAGS)		\
		$(OS_CFLAGS)		\
		-DLOCALE_ALIAS_FILE=\"$(LOCALEALIASFILE)\"

luit_LDADD = $(LUIT_LIBS)
luit_SOURCES = \
		charset.c		\
		charset.h		\
		iso2022.c		\
		iso2022.h		\
		locale.c		\
		luit.c				\
		luit.h				\
		other.c				\
		other.h				\
		parser.c		\
		parser.h		\
		sys.c				\
		sys.h

MAINTAINERCLEANFILES = ChangeLog INSTALL
all: config.h
		$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .o .obj
am--refresh:
		@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
		@for dep in $?; do \
		case '$(am__configure_deps)' in \
			*$$dep*) \
			echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
			$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
				&& exit 0; \
			exit 1;; \
		esac; \
		done; \
		echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
		$(am__cd) $(top_srcdir) && \
		$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
		@case '$?' in \
		*config.status*) \
			echo ' $(SHELL) ./config.status'; \
			$(SHELL) ./config.status;; \
		*) \
			echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
			cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
		esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
		$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
		$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
		$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
		@if test ! -f $@; then \
		rm -f stamp-h1; \
		$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
		else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
		@rm -f stamp-h1
		cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
		($(am__cd) $(top_srcdir) && $(AUTOHEADER))
		rm -f stamp-h1
		touch $@

distclean-hdr:
		-rm -f config.h stamp-h1
install-binPROGRAMS: $(bin_PROGRAMS)
		@$(NORMAL_INSTALL)
		test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
		@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
		for p in $$list; do echo "$$p $$p"; done | \
		sed 's/$(EXEEXT)$$//' | \
		while read p p1; do if test -f $$p; \
		then echo "$$p"; echo "$$p"; else :; fi; \
		done | \
		sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
			-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
		sed 'N;N;N;s,\n, ,g' | \
		$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
		{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
			if ($$2 == $$4) files[d] = files[d] " " $$1; \
			else { print "f", $$3 "/" $$4, $$1; } } \
		END { for (d in files) print "f", d, files[d] }' | \
		while read type dir files; do \
			if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
			test -z "$$files" || { \
			echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
			$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
			} \
		; done

uninstall-binPROGRAMS:
		@$(NORMAL_UNINSTALL)
		@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
		files=`for p in $$list; do echo "$$p"; done | \
		sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
			-e 's/$$/$(EXEEXT)/' `; \
		test -n "$$list" || exit 0; \
		echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
		cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
		-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
luit$(EXEEXT): $(luit_OBJECTS) $(luit_DEPENDENCIES)
		@rm -f luit$(EXEEXT)
		$(AM_V_CCLD)$(LINK) $(luit_OBJECTS) $(luit_LDADD) $(LIBS)

mostlyclean-compile:
		-rm -f *.$(OBJEXT)

distclean-compile:
		-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/charset.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso2022.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/locale.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/luit.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/other.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sys.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@		$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@		$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@am__fastdepCC_FALSE@		$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@		source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@		DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@		$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@		$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@		$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@am__fastdepCC_FALSE@		$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@		source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@		DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@		$(COMPILE) -c `$(CYGPATH_W) '$<'`

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#	(which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
		@fail= failcom='exit 1'; \
		for f in x $$MAKEFLAGS; do \
		case $$f in \
			*=* | --[!k]*);; \
			*k*) failcom='fail=yes';; \
		esac; \
		done; \
		dot_seen=no; \
		target=`echo $@ | sed s/-recursive//`; \
		list='$(SUBDIRS)'; for subdir in $$list; do \
		echo "Making $$target in $$subdir"; \
		if test "$$subdir" = "."; then \
			dot_seen=yes; \
			local_target="$$target-am"; \
		else \
			local_target="$$target"; \
		fi; \
		($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
		|| eval $$failcom; \
		done; \
		if test "$$dot_seen" = "no"; then \
		$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
		fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
		@fail= failcom='exit 1'; \
		for f in x $$MAKEFLAGS; do \
		case $$f in \
			*=* | --[!k]*);; \
			*k*) failcom='fail=yes';; \
		esac; \
		done; \
		dot_seen=no; \
		case "$@" in \
		distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
		*) list='$(SUBDIRS)' ;; \
		esac; \
		rev=''; for subdir in $$list; do \
		if test "$$subdir" = "."; then :; else \
			rev="$$subdir $$rev"; \
		fi; \
		done; \
		rev="$$rev ."; \
		target=`echo $@ | sed s/-recursive//`; \
		for subdir in $$rev; do \
		echo "Making $$target in $$subdir"; \
		if test "$$subdir" = "."; then \
			local_target="$$target-am"; \
		else \
			local_target="$$target"; \
		fi; \
		($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
		|| eval $$failcom; \
		done && test -z "$$fail"
tags-recursive:
		list='$(SUBDIRS)'; for subdir in $$list; do \
		test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
		done
ctags-recursive:
		list='$(SUBDIRS)'; for subdir in $$list; do \
		test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
		done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
		list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
		unique=`for i in $$list; do \
			if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
		done | \
		$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
			END { if (nonempty) { for (i in files) print i; }; }'`; \
		mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
				$(TAGS_FILES) $(LISP)
		set x; \
		here=`pwd`; \
		if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
		include_option=--etags-include; \
		empty_fix=.; \
		else \
		include_option=--include; \
		empty_fix=; \
		fi; \
		list='$(SUBDIRS)'; for subdir in $$list; do \
		if test "$$subdir" = .; then :; else \
			test ! -f $$subdir/TAGS || \
			set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
		fi; \
		done; \
		list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
		unique=`for i in $$list; do \
			if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
		done | \
		$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
			END { if (nonempty) { for (i in files) print i; }; }'`; \
		shift; \
		if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
		test -n "$$unique" || unique=$$empty_fix; \
		if test $$# -gt 0; then \
			$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
			"$$@" $$unique; \
		else \
			$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
			$$unique; \
		fi; \
		fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
				$(TAGS_FILES) $(LISP)
		list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
		unique=`for i in $$list; do \
			if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
		done | \
		$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
			END { if (nonempty) { for (i in files) print i; }; }'`; \
		test -z "$(CTAGS_ARGS)$$unique" \
		|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
			$$unique

GTAGS:
		here=`$(am__cd) $(top_builddir) && pwd` \
		&& $(am__cd) $(top_srcdir) \
		&& gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
		-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
		$(am__remove_distdir)
		test -d "$(distdir)" || mkdir "$(distdir)"
		@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
		topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
		list='$(DISTFILES)'; \
		dist_files=`for file in $$list; do echo $$file; done | \
		sed -e "s|^$$srcdirstrip/||;t" \
			-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
		case $$dist_files in \
		*/*) $(MKDIR_P) `echo "$$dist_files" | \
						sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
						sort -u` ;; \
		esac; \
		for file in $$dist_files; do \
		if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
		if test -d $$d/$$file; then \
			dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
			if test -d "$(distdir)/$$file"; then \
			find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
			fi; \
			if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
			cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
			find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
			fi; \
			cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
		else \
			test -f "$(distdir)/$$file" \
			|| cp -p $$d/$$file "$(distdir)/$$file" \
			|| exit 1; \
		fi; \
		done
		@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
		if test "$$subdir" = .; then :; else \
			test -d "$(distdir)/$$subdir" \
			|| $(MKDIR_P) "$(distdir)/$$subdir" \
			|| exit 1; \
		fi; \
		done
		@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
		if test "$$subdir" = .; then :; else \
			dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
			$(am__relativize); \
			new_distdir=$$reldir; \
			dir1=$$subdir; dir2="$(top_distdir)"; \
			$(am__relativize); \
			new_top_distdir=$$reldir; \
			echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
			echo "	am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
			($(am__cd) $$subdir && \
			$(MAKE) $(AM_MAKEFLAGS) \
				top_distdir="$$new_top_distdir" \
				distdir="$$new_distdir" \
				am__remove_distdir=: \
				am__skip_length_check=: \
				am__skip_mode_fix=: \
				distdir) \
			|| exit 1; \
		fi; \
		done
		$(MAKE) $(AM_MAKEFLAGS) \
		top_distdir="$(top_distdir)" distdir="$(distdir)" \
		dist-hook
		-test -n "$(am__skip_mode_fix)" \
		|| find "$(distdir)" -type d ! -perm -755 \
				-exec chmod u+rwx,go+rx {} \; -o \
		! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
		! -type d ! -perm -400 -exec chmod a+r {} \; -o \
		! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
		|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
		tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
		$(am__remove_distdir)
dist-bzip2: distdir
		tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
		$(am__remove_distdir)

dist-lzma: distdir
		tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
		$(am__remove_distdir)

dist-xz: distdir
		tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
		$(am__remove_distdir)

dist-tarZ: distdir
		tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
		$(am__remove_distdir)

dist-shar: distdir
		shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
		$(am__remove_distdir)

dist-zip: distdir
		-rm -f $(distdir).zip
		zip -rq $(distdir).zip $(distdir)
		$(am__remove_distdir)

dist dist-all: distdir
		tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
		tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
		$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
		case '$(DIST_ARCHIVES)' in \
		*.tar.gz*) \
		GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
		*.tar.bz2*) \
		bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
		*.tar.lzma*) \
		lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
		*.tar.xz*) \
		xz -dc $(distdir).tar.xz | $(am__untar) ;;\
		*.tar.Z*) \
		uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
		*.shar.gz*) \
		GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
		*.zip*) \
		unzip $(distdir).zip ;;\
		esac
		chmod -R a-w $(distdir); chmod a+w $(distdir)
		mkdir $(distdir)/_build
		mkdir $(distdir)/_inst
		chmod a-w $(distdir)
		test -d $(distdir)/_build || exit 0; \
		dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
		&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
		&& am__cwd=`pwd` \
		&& $(am__cd) $(distdir)/_build \
		&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
			$(DISTCHECK_CONFIGURE_FLAGS) \
		&& $(MAKE) $(AM_MAKEFLAGS) \
		&& $(MAKE) $(AM_MAKEFLAGS) dvi \
		&& $(MAKE) $(AM_MAKEFLAGS) check \
		&& $(MAKE) $(AM_MAKEFLAGS) install \
		&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
		&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
		&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
				distuninstallcheck \
		&& chmod -R a-w "$$dc_install_base" \
		&& ({ \
			(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
			&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
			&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
			&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
					distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
			} || { rm -rf "$$dc_destdir"; exit 1; }) \
		&& rm -rf "$$dc_destdir" \
		&& $(MAKE) $(AM_MAKEFLAGS) dist \
		&& rm -rf $(DIST_ARCHIVES) \
		&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
		&& cd "$$am__cwd" \
		|| exit 1
		$(am__remove_distdir)
		@(echo "$(distdir) archives ready for distribution: "; \
		list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
		sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
		@$(am__cd) '$(distuninstallcheck_dir)' \
		&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
		|| { echo "ERROR: files left after uninstall:" ; \
				if test -n "$(DESTDIR)"; then \
				echo "  (check DESTDIR support)"; \
				fi ; \
				$(distuninstallcheck_listfiles) ; \
				exit 1; } >&2
distcleancheck: distclean
		@if test '$(srcdir)' = . ; then \
		echo "ERROR: distcleancheck can only run from a VPATH build" ; \
		exit 1 ; \
		fi
		@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
		|| { echo "ERROR: files left in build directory after distclean:" ; \
			$(distcleancheck_listfiles) ; \
			exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(PROGRAMS) config.h
installdirs: installdirs-recursive
installdirs-am:
		for dir in "$(DESTDIR)$(bindir)"; do \
		test -z "$$dir" || $(MKDIR_P) "$$dir"; \
		done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
		@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
		$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
		install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
		`test -z '$(STRIP)' || \
			echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
		-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
		-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
		@echo "This command is intended for maintainers to use"
		@echo "it deletes files that may require special tools to rebuild."
		-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-generic mostlyclean-am

distclean: distclean-recursive
		-rm -f $(am__CONFIG_DISTCLEAN_FILES)
		-rm -rf ./$(DEPDIR)
		-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
		distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binPROGRAMS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
		-rm -f $(am__CONFIG_DISTCLEAN_FILES)
		-rm -rf $(top_srcdir)/autom4te.cache
		-rm -rf ./$(DEPDIR)
		-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
		ctags-recursive install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
		all all-am am--refresh check check-am clean clean-binPROGRAMS \
		clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
		dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
		dist-zip distcheck distclean distclean-compile \
		distclean-generic distclean-hdr distclean-tags distcleancheck \
		distdir distuninstallcheck dvi dvi-am html html-am info \
		info-am install install-am install-binPROGRAMS install-data \
		install-data-am install-dvi install-dvi-am install-exec \
		install-exec-am install-html install-html-am install-info \
		install-info-am install-man install-pdf install-pdf-am \
		install-ps install-ps-am install-strip installcheck \
		installcheck-am installdirs installdirs-am maintainer-clean \
		maintainer-clean-generic mostlyclean mostlyclean-compile \
		mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
		uninstall uninstall-am uninstall-binPROGRAMS


.PHONY: ChangeLog INSTALL

INSTALL:
		$(INSTALL_CMD)

ChangeLog:
		$(CHANGELOG_CMD)

dist-hook: ChangeLog INSTALL

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: