Skip to content

Latest commit

 

History

History
279 lines (204 loc) · 11.6 KB

CONTRIBUTING.rst

File metadata and controls

279 lines (204 loc) · 11.6 KB

How to contribute to the Cisco Third Party CI

There are several steps required to contribute to the Cisco Third Party CI, such as adding a new job or modifying an existing one.

This repo's master branch is the production CI and holds the stable version of each of the jobs as well and the configuration about which jobs to run and when.

In order to prevent any collateral damage to the stable running CI jobs development and experimental jobs should be developed in a separate branch and then pulled into the master branch and enabled on the check queue once they have proven that they are stable.

To enforce this behaviour no changes can be pushed directly into the master branch, therefore they must go through a pull request process and be reviewed before being accepted.

To allow the testing of in-development/experimental jobs running in the real CI system, there is a separate Zuul queue provided which will only trigger a run when a "cisco-experimental" is left as a comment on a gerrit patch. By default this experimental queue will run the exact same code as the normal check job queue however, by including a line Cisco-CI-Experimental-Branch: <branch> in the commit message of the gerrit patch it will allow you to run the code from your development branch.

When new jobs are added to the CI, they must first go through an experimental phase to prove their success and stablity. These steps cover the processes required to add a new experimental job, develop it and then get it promoted to a regular job.

  1. Clone project-config-third-party to your local system

  2. Create the first development branch by running git checkout -b <branch name> whist on master, a good example of a branch name is adding_experimental_<job name>

  3. Define a new job and enable it in the experimental queue

    1. Modify jenkins/jobs/projects.yaml and under the project your adding the job for add:

      - 'gate-{name}-dsvm-tempest-smoke-{job-name}-{zuul-branch}-{node}':
        job-name: <job-name>
      

      Where <job-name> is replaced with the name of the job you want to add, for example nexus, ironic-cimc.

    2. Modify zuul/layout.yaml and under the project your job is for add the job under the experimental header:

      experimental:
        - gate-networking-cisco-dsvm-tempest-smoke-nexus-pike-centos-7-2-node
        - <your fully expanded job name here>
      

      The job name included in this file needs to be fully expanded with all the parts of the name populated, for example the first job in the example above was filled in with this information:

      • {name} is now networking-cisco because its for the project networking-cisco,
      • {job-name} is the job-name, in this case nexus,
      • {zuul-branch} is now pike as this job is going to test the pike release,
      • {node} is now centos-7-2-node as this job needs to run on a centos-7-2-node cluster
  4. Run the local tox test suite using tox to ensure that you've defined your job correctly in both the jenkins config file and the zuul config file.

  5. Commit these changes, to your branch and push this changes and your branch to the upstream repo.

  6. Create a pull request on the github repo between your development branch and the master branch for the change you've just pushed indicating that the pull request is to add a new experimental job.

  7. That change will get reviewed and merged into the master branch enabling your new job to run when you leave the "cisco-experimental" comment on a gerrit patch upstream.

  8. To test your job is running, create a [DNM] (do not merge) test patch to the project that your job is going to run against, making sure to include the line Cisco-CI-Experimental-Branch: <branch> (where you replace <branch> with the name of the branch we created in the earlier step) in the commit message, for example: https://review.openstack.org/#/c/514312/

  9. Leave a comment on that patch with the text cisco-experimental and it should trigger your patch to enter the experimental queue, and you can check that on the Zuul Dashboard.

  10. After some amount of time the experimental queue should post its results to your [DNM] patch. Your new experimental job will fail because we haven't populated the playbooks for job yet.

  1. Create a second development branch based on the first development branch by running git checkout -b <branch name>, a good example branch name is adding_<job name>_job_logic
  2. Create the three base playbooks required for any job running the Cisco CI in the playbooks directory:
    • <job-name>-job-pre.yaml
    • <job-name>-job.yaml
    • <job-name>-job-post.yaml
  3. Start populating the playbooks with roles from the playbooks/roles directory to setup to perform the actions required by the job, the nexus-job-*.yaml are a good example of a job that requires some shared resources, and runs devstack + the tempest smoke tests.
  4. Once you are happy you're ready to test your playbooks, run the tox -e linters command to validate your playbooks yaml syntax.
  5. Then as a new commit to your development branch push your changes up to the upstream reposistory.
  6. To test your changes return to your [DNM] patch on gerrit, and leave the cisco-experimental comment again, this time the CI will run all the jobs in the experimental queue with the changes you've made to your playbooks and any roles.
  7. Wait for the results to be posted to the gerrit patch, and then check if all the jobs in the experimental queue have succeeded or failed.
  8. If your job has failed you can view the logs by clicking the link posted by the CI system to gerrit.
  9. If a job which isn't failing on the check queue is failing on your experimental run, it is likely your changes have had a side effect on another job and this will need repairing before your new job can be accepted.
  10. Repeat the above steps to make any changes you need to make to the playbooks or roles until they are testing what they should be testing and all the jobs that are already in the check queue are also passing along side your new job. There may be other experimental jobs in the queue that are failing, but you can ignore those.

Note

Remember to rebase your changes on to master regularly by running git fetch && git rebase -i origin/master so that your branch remains up to date with the current stable state of the repository.

  1. Do a final rebase on to master by running git fetch && git rebase -i origin/master, if there are any conflicts resolve them.

  2. Make a change in zuul/layout.yaml, to additionally add your job/jobs into the check queue:

    check:
      - gate-networking-cisco-dsvm-tempest-smoke-nexus-pike-centos-7-2-node
      - <your fully expanded job name here>
    
  3. Ensure that your code is passing all the linters by running tox and fix any issues.

  4. Ensure all your logic is commited and your branch is pushed up to the upstream repo.

  5. Go to the [DNM] gerrit patch and issue one final cisco-experimental comment to run the job in its current state.

  6. Create a new pull request from your branch to the master branch, indicating that you are promoting your job to a check job, and in the description add a link to the gerrit patch with the successfully passing experimental results.

  7. This pull request will then be reviewed and if there are no issues found with it, it'll be accepted and merged onto the master branch.

Note

If a pull request is merged and results in consistent failures then that commit will be reverted to restore the CI to working order. The issue can then be fixed on your development branch and a new pull request made to reaccept your job.

Occasionally an existing job in the CI will need updating to increase its feature coverage or to repair it after an external action causes it to fail regularly. The process for repairing these jobs is similar to the process for adding a new job except that there is no need to add a new experimental job, as this job should already be running in the experimental queue. These steps cover the processes required to update and test an existing job, and then get the fix for that job accepted into the master branch.

  1. Clone project-config-third-party to your local system
  2. Create a new development branch by running git checkout -b <branch name>
  3. To test the fixes you've made to the job, create a [DNM] (do not merge) test patch to the project that your job is running against, making sure to include the line Cisco-CI-Experimental-Branch: <branch> (where you replace <branch> with the name of the branch we created in the earlier step) in the commit message, for example: https://review.openstack.org/#/c/514312/
  4. Make the required changes to the playbooks and roles for the job that needs fixing.
  5. Commit and push your changes
  6. Leave a comment on your [DMN] patch with the text cisco-experimental and it should trigger your patch to enter the experimental queue, and you can check that on the Zuul Dashboard.
  7. Wait for the results to be posted to the gerrit patch, and then check if all the jobs in the experimental queue have succeeded or failed.
  8. If the job has failed you can view the logs by clicking the link posted by the CI system to gerrit.
  9. If a job which isn't failing on the check queue is failing on your experimental run, it is likely your changes have had a side effect on another job and this will need repairing before your new job can be accepted.
  10. Repeat the above steps to make any changes you need to make to the playbooks or roles until they are testing what they should be testing and all the jobs that are already in the check queue are also passing along side with the job you are fixing There may be other experimental jobs in the queue that are failing, but you can ignore those.
  1. Do a final rebase on to master by running git fetch && git rebase -i origin/master, if there are any conflicts resolve them.
  2. Ensure that your code is passing all the linters by running tox and fix any issues.
  3. Ensure all your logic is commited and your branch is pushed up to the upstream repo.
  4. Go to the [DNM] gerrit patch and issue one final cisco-experimental comment to run the job in its current state.
  5. Create a new pull request from your branch to the master branch, indicating that you are promoting your job to a check job, and in the description add a link to the gerrit patch with the successfully passing experimental results.
  6. This pull request will then be reviewed and if there are no issues found with it, it'll be accepted and merged onto the master branch.