QKM Lighting labels not accurate

[RaunchyUndead]

When trying to assign QMK lighting on layout the labels are not accurate. Example RGB toggle does not toggle the rgb on/off, but RGB Mode+ does. This is not the only thing wrong as several of the lighting labels are mixed up.

[dekruger]

I am experiencing the same thing. Currently just using a workaround based on testing which labels actually do what functions.

[TwoPuncakes]

I'm having the same issue with my KBD67 Lite R1 with the KBD67 MKII RGB V2 board. I was hoping this firmware version would perhaps fix it, but it did not. This is with VIA 1.3.1.

After trial and error though, I was able to find out which RGB setting does:

• RGB Mode - → either RGB Mode + or RGB Mode - (cycles RGB modes/animations)
• RGB Mode + → RGB Toggle
• Hue - → Hue + (cycles solid color from R, G, to B)
• Hue + → either RGB Mode + or RGB Mode
• Sat + → Hue - (cycles solid color from B, G, to R)
• Sat - → Sat + (normal RGB colors)
• Bright - → Bright +
• Bright + → Sat - (makes the color more white)
• Effect speed - → Effect speed +
• Effect speed + → Bright -
• RGB Mode P → Effect speed -
• RGB Mode B → RGB Mode P (Plain, solid color)
• RGB Mode R → RGB Mode B (Breathe)
• RGB Mode SW → RGB Mode R (Rainbow)
• RGB Mode SN → RGB Mode SW (Swirl)
• Everything else → No visible effect on my KB

[TwoPuncakes]

Found a fix! I went ahead and downloaded the latest firmware from VIA (as of 25 Jan 2021), flashed it on my keeb, and now VIA has the proper mapping.

[wilba]

Firmware from the VIA website should not have this problem. It was only a problem for firmware built from QMK master branch while there was a bug in the keycodes.