// -------------------------------------------------------- // // This file is to configure the configurable settings. // Load this file before script.js file at gmap.html. // // --------------------------------------------------------
// – Title Settings -------------------------------------- // Show number of aircraft and/or messages per second in the page title PlaneCountInTitle = true; MessageRateInTitle = true;
// – Output Settings ------------------------------------- // Show metric values // The Metric setting controls whether metric (m, km, km/h) or // imperial (ft, NM, knots) units are used in the plane table // and in the detailed plane info. If ShowOtherUnits is true, // then the other unit will also be shown in the detailed plane // info. Metric = true; ShowOtherUnits = true;
// – Map settings ---------------------------------------- // These settings are overridden by any position information // provided by dump1090 itself. All positions are in decimal // degrees.
// Default center of the map. DefaultCenterLat = 52.085624; DefaultCenterLon = 5.0890591; // The google maps zoom level, 0 - 16, lower is further out DefaultZoomLvl = 7;
// Center marker. If dump1090 provides a receiver location, // that location is used and these settings are ignored.
SiteShow = true; // true to show a center marker SiteLat = 52.085624; // position of the marker SiteLon = 5.0890591; SiteName = “My Radar Site”; // tooltip of the marker
// Extra map types to include. These work for maps with 256x256 tiles where a // URL can be constructed by simple substition of x/y tile number and zoom level var ExtraMapTypes = { ‘OpenStreetMap’ : ‘http://tile.openstreetmap.org/{z}/{x}/{y}.png’, // NB: the following generally only cover the US ‘Sectional Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/sec/{z}/{x}/{y}.png?origin=nw’, ‘Terminal Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/tac/{z}/{x}/{y}.png?origin=nw’, ‘World Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/wac/{z}/{x}/{y}.png?origin=nw’, ‘IFR Low Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/enrl/{z}/{x}/{y}.png?origin=nw’, ‘IFR Area Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/enra/{z}/{x}/{y}.png?origin=nw’, ‘IFR High Charts’ : ‘http://wms.chartbundle.com/tms/1.0.0/enrh/{z}/{x}/{y}.png?origin=nw’ };
// – Marker settings -------------------------------------
// These settings control the coloring of aircraft by altitude. // All color values are given as Hue (0-359) / Saturation (0-100) / Lightness (0-100) ColorByAlt = { // HSL for planes with unknown altitude: unknown : { h: 0, s: 0, l: 40 },
// HSL for planes that are on the ground: ground : { h: 120, s: 100, l: 30 },
air : { // These define altitude-to-hue mappings // at particular altitudes; the hue // for intermediate altitudes that lie // between the provided altitudes is linearly // interpolated. // // Mappings must be provided in increasing // order of altitude. // // Altitudes below the first entry use the // hue of the first entry; altitudes above // the last entry use the hue of the last // entry. h: [ { alt: 2000, val: 20 }, // orange { alt: 10000, val: 140 }, // light green { alt: 40000, val: 300 } ], // magenta s: 85, l: 50, },
// Changes added to the color of the currently selected plane selected : { h: 0, s: -10, l: +20 },
// Changes added to the color of planes that have stale position info stale : { h: 0, s: -10, l: +30 },
// Changes added to the color of planes that have positions from mlat mlat : { h: 0, s: -10, l: -10 } };
// For a monochrome display try this: // ColorByAlt = { // unknown : { h: 0, s: 0, l: 40 }, // ground : { h: 0, s: 0, l: 30 }, // air : { h: [ { alt: 0, val: 0 } ], s: 0, l: 50 }, // selected : { h: 0, s: 0, l: +30 }, // stale : { h: 0, s: 0, l: +30 }, // mlat : { h: 0, s: 0, l: -10 } // };
// Outline color for aircraft icons with an ADS-B position OutlineADSBColor = ‘#000000’;
// Outline color for aircraft icons with a mlat position OutlineMlatColor = ‘#4040FF’;
SiteCircles = true; // true to show circles (only shown if the center marker is shown) // In nautical miles or km (depending settings value ‘Metric’) SiteCirclesDistances = new Array(100,150,200);
// Show the clocks at the top of the righthand pane? You can disable the clocks if you want here ShowClocks = true;
// Controls page title, righthand pane when nothing is selected PageName = “DUMP1090”;
// Show country flags by ICAO addresses? ShowFlags = true;
// Path to country flags (can be a relative or absolute URL; include a trailing ) FlagPath = “flags-tiny”;