Skip to content

Home

Jump to bottom Edit New page
Alden Hart edited this page Mar 17, 2017 · 65 revisions
g2core

Welcome to the g2 wiki!

This wiki documents the TinyG ARM port, which we are calling g2core.

This wiki serves as a user and programmer manual and documents progress on the project. We (Synthetos) maintain the wiki, but it's an open wiki. If you want to post wiki-type stuff feel free to do it here. Please let us know via a github Issue if it's anything that needs active attention - Issues are good for requested changes, discussions and bona-fide software bugs.

TinyG2 on an Arduino Due

Current State of g2core

The Master branch contains the current stable code. New feature development takes place in various feature branches which are then promoted to the Edge branch to make them available for beta testing.

Currently the Master branch has the 100.xx firmware builds. The firmware version is 0.99. The firmware version indicates the configuration and UI compatibility. Please note the changes in the Readme.md for the respective branch.

Add a custom footer

Getting Started Pages

  1. Home
  2. What is g2core?
  3. Who uses g2core?
  4. Jerk-Controlled Motion
  5. Getting Started with g2core
  6. Connecting to g2core
  7. Configuring g2core
  8. Flashing g2core
  9. Troubleshooting

Reference Pages

  1. Gcodes
  2. Mcodes
  3. Text Mode
  4. JSON Communications
  5. GPIO Digital IO
  6. Alarms & Exceptions
  7. Power Management
  8. Coordinate Systems
  9. Status Reports
  10. Status Codes
  11. G2 Communications
  12. Tool Offsets and Selection
  13. Probing
  14. Feedhold, Resume, Job Kill
  15. Marlin Compatibility
  16. 9 Axis UVW Operation
  17. gQuintic Specs

Discussion Topics

  1. Roadmap
  2. GPIO for 1.X Releases
  3. Toolheads
  4. Raster Streaming Prototol
  5. g2core REST Interface
  6. Gcode Parsing
  7. G2 3DP Dialect
  8. Consensus Gcode
  9. Digital DRO
  10. Overview of Motion Processing

Developer Pages

  1. Development & Contribution
  2. Branching and Release - DRAFT
  3. Getting Started with g2core Development
  4. Project Structure & Motate
  5. Compiling G2
  6. OSX w/Xcode
  7. OSX/Linux Command Line
  8. Windows10 w/AtmelStudio7
  9. Debugging G2 on OSX
  10. Board and Machine Profiles
  11. Arduino Due Pinout
  12. Arduino DUE External Interfaces
  13. Diagnostics
  14. Debugging w/Motate Pins
  15. Development Troubleshooting
  16. g2core Communications
  17. Git Procedures
  18. Windows 10 / VMware 8 Issues
  19. Dual Endpoint USB Internals
  20. G2core License
  21. VSCode Setup
  22. Compatibility Axioms
  23. Wiki History
Clone this wiki locally