CosyPose: Consistent multi-view multi-object 6D pose estimation

Yann Labbé, Justin Carpentier, Mathieu Aubry, Josef Sivic

ECCV: European Conference on Computer Vision, 2020

[Paper] [Project page] [Video (1 min)] [Video (10 min)] [Slides]

Winner of the BOP Challenge 2020 at ECCV'20 [slides] [BOP challenge paper]

Citation

If you use this code in your research, please cite the paper:

@inproceedings{labbe2020,
title= {CosyPose: Consistent multi-view multi-object 6D pose estimation}
author={Y. {Labbe} and J. {Carpentier} and M. {Aubry} and J. {Sivic}},
booktitle={Proceedings of the European Conference on Computer Vision (ECCV)},
year={2020}}

News

CosyPose is the winning method in the BOP challenge 2020 (5 awards in total, including best overall method and best RGB-only method) ! All the code and models used for the challenge are available in this repository.
We participate in the BOP challenge 2020. Results are available on the public leaderboard for 7 pose estimation benchmarks. We release 2D detection models (MaskRCNN) and 6D pose estimation models (coarse+refiner) used on each dataset.
The paper is available on arXiv and full code is released.
Our paper on CosyPose is accepted at ECCV 2020.

Table of content

Overview
Installation
Downloading and preparing data
Note on GPU parallelization
Reproducing single-view results
Training the single-view 6D pose estimation models
- Synthetic data generation script
- Training script
Reproducing multi-view results
Using CosyPose in a custom scenario
BOP20 models and results

Overview

This repository contains the code for the full CosyPose approach, including:

Single-view single-object 6D pose estimator

Given an RGB image and a 2D bounding box of an object with known 3D model, the 6D pose estimator predicts the full 6D pose of the object with respect to the camera. Our method is inspired by DeepIM with several simplifications and technical improvements. It is fully implemented in pytorch and achieve single-view state-of-the-art on YCB-Video and T-LESS. We provide pre-trained models used in our experiments on both datasets. We make the training code that we used to train them available. It can be parallelized on multiple GPUs and multiple nodes.

Synthetic data generation

The single-view 6D pose estimation models are trained on a mix of synthetic and real images. We provide the code for generating the additional synthetic images.

Multi-view multi-object scene reconstruction

Single-view object-level reconstruction of a scene often fails because of detection mistakes, pose estimation errors and occlusions; which makes it impractical for real applications. Our multi-view approach, CosyPose, addresses these single-view limitations and helps improving 6D pose accuracy by leveraging information from multiple cameras with unknown positions. We provide the full code, including robust object-level multi-view matching and global scene refinement. The method is agnostic to the 6D pose estimator used, and can therefore be combined with many other existing single-view object pose estimation method to solve problems on other datasets, or in real scenarios. We provide a utility for running CosyPose given a set of input 6D object candidates in each image.

BOP challenge 2020: single-view 2D detection + 6D pose estimation models

We used our {coarse+refinement} single-view 6D pose estimation method in the BOP challenge 2020. In addition, we trained a MaskRCNN detector (torchvision's implementation) on each of the 7 core datasets (LM-O, T-LESS, TUD-L, IC-BIN, ITODD, HB, YCB-V). We provide 2D detectors and 6D pose estimation models for these datasets. All training (including 2D detector), inference and evaluation code are available in this repository. It can be easily used for another dataset in the BOP format.

Installation

git clone --recurse-submodules https://github.com/Simple-Robotics/cosypose.git
cd cosypose
conda env create -n cosypose --file environment.yaml
conda activate cosypose
git lfs pull
python setup.py install

The installation may take some time as several packages must be downloaded and installed/compiled. If you plan to change the code, run python setup.py develop.

Notes:

We use the bop_toolkit to compute some evaluation metrics on T-LESS. To ensure reproducibility, we use our own fork of the repository. It is downloaded in deps/.
The package pinocchio also requires liburdfdom-tools to be installed in the system. In Ubuntu, you can install this library by running sudo apt install liburdfdom-tools.

Downloading and preparing data

Click for details...

All data used (datasets, models, results, ...) are stored in a directory local_data at the root of the repository. Create it with mkdir local_data or use a symlink if you want the data to be stored at a different place. We provide the utility cosypose/scripts/download.py for downloading required data and models. All of the files can also be downloaded manually.

BOP Datasets

For both T-LESS and YCB-Video, we use the datasets in the BOP format. If you already have them on your disk, place them in local_data/bop_datasets. Alternatively, you can download it using :

python -m cosypose.scripts.download --bop_dataset=ycbv
python -m cosypose.scripts.download --bop_dataset=tless

Additional files that contain information about the datasets used to fairly compare with prior works on both datasets.

python -m cosypose.scripts.download --bop_extra_files=ycbv
python -m cosypose.scripts.download --bop_extra_files=tless

We use pybullet for rendering images which requires object models to be provided in the URDF format. We provide converted URDF files, they can be downloaded using:

python -m cosypose.scripts.download --urdf_models=ycbv
python -m cosypose.scripts.download --urdf_models=tless.cad

In the BOP format, the YCB objects 002_master_chef_can and 040_large_marker are considered symmetric, but not by previous works such as PoseCNN, PVNet and DeepIM. To ensure a fair comparison (using ADD instead of ADD-S for ADD-(S) for these objects), these objects must not be considered symmetric in the evaluation. To keep the uniformity of the models format, we generate a set of YCB objects models_bop-compat_eval that can be used to fairly compare our approach against previous works. You can download them directly:

python -m cosypose.scripts.download --ycbv_compat_models

Notes:

The URDF files were obtained using these commands (requires meshlab to be installed):

python -m cosypose.scripts.convert_models_to_urdf --models=ycbv
python -m cosypose.scripts.convert_models_to_urdf --models=tless.cad

Compatibility models were obtained using the following script:
```
python -m cosypose.scripts.make_ycbv_compat_models
```

Pre-trained models for single-view estimator

The pre-trained models of the single-view pose estimator can be downloaded using:

# YCB-V Single-view refiner
python -m cosypose.scripts.download --model=ycbv-refiner-finetune--251020

# YCB-V Single-view refiner trained on synthetic data only 
# Only download this if you are interested in retraining the above model 
python -m cosypose.scripts.download --model=ycbv-refiner-syntonly--596719

# T-LESS coarse and refiner models 
python -m cosypose.scripts.download --model=tless-coarse--10219
python -m cosypose.scripts.download --model=tless-refiner--585928

2D detections

To ensure a fair comparison with prior works on both datasets, we use the same detections as DeepIM (from PoseCNN) on YCB-Video and the same as Pix2pose (from a RetinaNet model) on T-LESS. Download the saved 2D detections for both datasets using

python -m cosypose.scripts.download --detections=ycbv_posecnn

# SiSo detections: 1 detection with highest per score per class per image on all images
# Available for each image of the T-LESS dataset (primesense sensor)
# These are the same detections as used in Pix2pose's experiments
python -m cosypose.scripts.download --detections=tless_pix2pose_retinanet_siso_top1

# ViVo detections: All detections for a subset of 1000 images of T-LESS.
# Used in our multi-view experiments.
python -m cosypose.scripts.download --detections=tless_pix2pose_retinanet_vivo_all

If you are interested in re-training a detector, please see the BOP 2020 section.

Notes:

The PoseCNN detections (and coarse pose estimates) on YCB-Video were extracted and converted from these PoseCNN results.
The Pix2pose detections were extracted using pix2pose's code. We used the detection model from their paper, see here. For the ViVo detections, their code was slightly modified. The code used to extract detections can be found here.

Note on GPU parallelization

Click for details...

Training and evaluation code can be parallelized across multiple gpus and multiple machines using vanilla torch.distributed. This is done by simply starting multiple processes with the same arguments and assigning each process to a specific GPU via CUDA_VISIBLE_DEVICES. To run the processes on a local machine or on a SLUMR cluster, we use our own utility job-runner but other similar tools such as dask-jobqueue or submitit could be used. We provide instructions for single-node multi-gpu training, and for multi-gpu multi-node training on a SLURM cluster.

Single gpu on a single node

# CUDA ID of GPU you want to use
export CUDA_VISIBLE_DEVICES=0
python -m cosypose.scripts.example_multigpu

where scripts.example_multigpu can be replaced by scripts.run_pose_training or scripts.run_cosypose_eval (see below for usage of training/evaluation scripts).

Configuration of `job-runner` for multi-gpu usage

Change the path to the code directory, anaconda location and specify a temporary directory for storing job logs by modifying `job-runner-config.yaml'. If you have access to a SLURM cluster, specify the name of the queue, it's specifications (number of GPUs/CPUs per node) and the flags you typically use in a slurm script. Once you are done, run:

runjob-config job-runner-config.yaml

Multi-gpu on a single node

# CUDA IDS of GPUs you want to use
export CUDA_VISIBLE_DEVICES=0,1
runjob --ngpus=2 --queue=local python -m cosypose.scripts.example_multigpu

The logs of the first process will be printed. You can check the logs of the other processes in the job directory.

On a SLURM cluster

runjob --ngpus=8 --queue=gpu_p1  python -m cosypose.scripts.example_multigpu

Reproducing single-view results

Click for details...

YCB-Video

python -m cosypose.scripts.run_cosypose_eval --config ycbv

This will run the inference and evaluation on YCB-Video. We use our own implementation of the evaluation. We have checked that it matches the results from the original matlab implementation for the AUC of ADD-S and AUC of ADD(-S) metrics. For example, you can see that the PoseCNN results are similar to the ones reported in the PoseCNN/DeepIM paper:

PoseCNN/AUC of ADD(-S): 0.613

The YCB-Video results and metrics can be downloaded directly:

python -m cosypose.scripts.download --result_id=ycbv-n_views=1--5154971130

T-LESS

python -m cosypose.scripts.run_cosypose_eval --config tless-siso

This will run inference on the entire T-LESS dataset and print some metrics but not e_vsd<0.3 which is not supported in our code. The results can also be downloaded:

python -m cosypose.scripts.download --result_id=tless-siso-n_views=1--684390594

To measure e_vsd<0.3, we use the BOP Toolkit. You can run it using:

python -m cosypose.scripts.run_bop_eval --result_id=tless-siso-n_views=1--684390594 --method=pix2pose_detections/refiner/iteration=4

This will create a local_data/bop_predictions_csv/cosyposeXXXX-eccv2020_tless-test-primesense.csv file in the BOP format and run evaluation. Intermediate metrics and final scores are saved in local_data/bop_eval_outputs/cosposyXXXX-eccV2020_tless-test-primesense/, where XXXXX corresponds to a random number generated by the script.

The T-LESS SiSo results can also be downloaded directly:

python -m cosypose.scripts.download --bop_result_id=cosypose847205-eccv2020_tless-test-primesense

You can check the results match those from the paper:

cat local_data/bop_eval_outputs/cosypose847205-eccv2020_tless-test-primesense/error\=vsd_ntop\=1_delta\=15.000_tau\=20.000/scores_th\=0.300_min-visib\=0.100.json

{
  "gt_count": 69545,
  "mean_obj_recall": 0.6378486071644157,
  "mean_scene_recall": 0.6444110450903551,
  ...
  "recall": 0.632720209307857,
  ...
  "targets_count": 50452,
  "tp_count": 31922
}

Following other works, we reported mean_obj_recall in the paper.

Single-view visualization

You can visualize the single-view predictions using this notebook as example.

Training the single-view 6D pose estimation models

Click for details...

Downloading synthetic images

The pose estimation models are trained on a mix of real images provided with the T-LESS/YCB-Video datasets and a set of images that we generated. For each dataset, we generated 1 million synthetic images. You can download these large datasets:

# 106 GB
python -m cosypose.scripts.download --synt_dataset=tless-1M

# 113 GB
python -m cosypose.scripts.download --synt_dataset=ycbv-1M

We provide below the instructions to generate these dataset locally if you are interested in using our synthetic data generation code.

Synthetic data generation script

Textures for domain randomization

The synthetic training images are generated with some domain randomization. It includes adding textures to the background (and objects and T-LESS). We use a set of textures extracted from ShapeNet objects. Download the texture dataset:

python -m cosypose.scripts.download --texture_dataset

Recording a synthetic dataset

The synthetic images are generated using multiple processes managed by dask. The synthetic training images can be generated using the following commands for both datasets:

export CUDA_VISIBLE_DEVICES=0
python -m cosypose.scripts.run_dataset_recording --config tless --local
python -m cosypose.scripts.run_dataset_recording --config ycbv --local

Make sure that enough space is available on your disk. We generate 1 million images which is around 120GB for each dataset. Note that we use a high number of synthetic images, but it may be possible to use fewer images. Please see directly the script scripts/run_dataset_recording.py for additionnal parameters. It is also possible to use dask-jobqueue to generate the images on a cluster but we do not provide a simple configuration script for this at the moment. If you are interested in generating data using multiple machines on a cluster, you will have to modify dask-jobqueue's Cluster definition here.

Visualizing images of the dataset

You can visualize the images of the generated dataset using this notebook. You can check that the ground truth prvided by a dataset is correct using this notebook.

Background images for data augmentation

We apply data augmentation to the training images. Data augmentation includes pasting random images of the pascal VOC dataset on the background of the scenes. You can download Pascal VOC using the following commands:

cd local_data
wget http://host.robots.ox.ac.uk/pascal/VOC/voc2012/VOCtrainval_11-May-2012.tar
tar -xvf VOCtrainval_11-May-2012.tar

(If the website is down, which happens periodically, you can alternatively download these files from a mirror at https://pjreddie.com/media/files/VOCtrainval_11-May-2012.tar)

Training script

Once you have generated the synthetic data images and downloaded pascal VOC, you can run the training script. On YCB-Video, we train a coarse model on synthetic data only and fine-tune it on the synthetic + real images. On T-LESS, we train a coarse and refinement model and synthetic + provided real images of isolated objects directly from scratch. In our experiments, all models are trained using the same procedure on 32 GPUs.

runjob --ngpus=32 python -m cosypose.scripts.run_pose_training --config ycbv-refiner-syntonly
runjob --ngpus=32 python -m cosypose.scripts.run_pose_training --config ycbv-refiner-finetune
runjob --ngpus=32 python -m cosypose.scripts.run_pose_training --config tless-coarse
runjob --ngpus=32 python -m cosypose.scripts.run_pose_training --config tless-refiner

You can visualize the logs of the provided models in this notebook.

You can add the run_id of each model that are your are training to visualize training metrics.

Notes:

While we used 32 GPUs in our experiments, the training script can be ran with any number of GPUs. It will just be slower and the overall batch size will be smaller. We have not studied the impact of batch size on final performance of the model. On 32 NVIDIA V100, training a model takes approximately 10 hours. Note that the models are trained from scratch on all the objects of each dataset simulatenously.
If you are interested in training with limited resources, you could consider the following changes to the code: (a) use a smaller backbone, e.g. flownet, resnet18 or resnet34, (b) train for fewer iterations, (c) start from one of our pre-trained models. All the parameters are defined in cosypose/scripts/run_pose_training.py. If you are trying to train with limited resources or on your own dataset and datas, please do not hesitate to share your experience, by opening an issue or by sending an email !
We run evaluation of the models a few times during training. You can disable it by adding the flag --no-eval to speed up training. Note that the we do not use the evaluation metrics to find the best model since no official validation splits are available for YCB-Video/T-LESS. We always report results for the model obtained at the end of the training.

Reproducing multi-view results

Click for details...

The following scripts will run the full CosyPose pipeline (single-view predictions + multi-view scene reconstruction), compute the metrics reported in the paper and save the results to a directory in local_data/results/.

export CUDA_VISIBLE_DEVICES=0
python -m cosypose.scripts.run_cosypose_eval --config tless-vivo --nviews=4
python -m cosypose.scripts.run_cosypose_eval --config tless-vivo --nviews=8
python -m cosypose.scripts.run_cosypose_eval --config ycbv --nviews=5

Note that the inference and evaluation can be sped up using runjob if you have access to multiple GPUs. The mAP@ADD-S<0.1d and AUC of ADD-S metrics are computed using our own code since they are not supported by the BOP toolkit. We refer to the appendix of the main paper for more details on these metrics.

The results can be also downloaded directly:

# YCB-Video 5 views
python -m cosypose.scripts.download --result_id=ycbv-n_views=5--8073381555 

# T-LESS ViVo 4 views
python -m cosypose.scripts.download --result_id=tless-vivo-n_views=4--2731943061

# T-LESS ViVo 8 views
python -m cosypose.scripts.download --result_id=tless-vivo-n_views=8--2322743008

On T-LESS ViVo, the evsd<0.3 and ADD-S<0.1d metrics are computed using the BOP toolkit, for example for computing the multi-view results for ViVo 8 views:

python -m cosypose.scripts.run_bop_eval  --results  tless-vivo-n_views=8--2322743008 --method pix2pose_detections/ba_output+all_cand --vivo

The ba_output+all_cand predictions correspond to the output of CosyPose concatenated to all the single-view candidates as explained in the experiment section of the paper. The single-view candidates have strictly lower score than the multi-view predictions, which means that single-view estimates are used for evaluation only if there are no multi-view predictions for an object, e.g. typically because a camera cannot be placed with respect to the scene because there are too few inlier candidates.

We also provide the BOP evaluation results that we computed and reported in the paper:

# T-LESS ViVo 1 view
python -m cosypose.scripts.download --bop_results=cosypose68486-eccv2020_tless-test-primesense

# T-LESS ViVo 4 views
python -m cosypose.scripts.download --bop_results=cosypose615294-eccv2020_tless-test-primesense

# T-LESS ViVo 8 views
python -m cosypose.scripts.download --bop_result_id=cosypose114533-eccv2020_tless-test-primesense

Multi-view visualization

You can use this notebook to visualize the multi-view results on YCB-Video and T-LESS and generate the 3D visualization GIFs.

Using CosyPose in a custom scenario

Click for details...

Stage 2 and 3 of CosyPose are agnostic to the 6D pose estimator used, and can therefore be combined with many other existing single-view object pose estimation method to solve problems on other datasets, or for real applications. We provide a utility for running CosyPose given a set of input 6D object candidates in each image.

If you are willing to combine CosyPose with your own pose estimator, you will need to provide the following:

The 3D models of the objects considered and their associated symmetries. The models should be provided in a format similar to the BOP format in a models directory.
A set of input 6D object candidates in each image candidates.csv. We use the same convention as the BOP format, but all the candidates in this file must be provided for a unique scene (a single 3D reconstruction) in different views.
The intrinsics parameters of the cameras of each view in a file scene_camera.json following the BOP format.

Use these commands to create a custom scenario with T-LESS objects and run CosyPose on it:

cd local_data
mkdir -p custom_scenarios/example
ln -s $(pwd)/bop_datasets/tless/models custom_scenarios/example

export CUDA_VISIBLE_DEVICES=0
python -m cosypose.scripts.download --example_scenario
python -m cosypose.scripts.run_custom_scenario --scenario=example

This will generate the following files:

results/subscene=0/predicted_scene.json a set of predicted objects and cameras with their associated poses in a common reference frame.
results/subscene=0/scene_reprojected.csv poses of predicted objects expressed in camera frames, in the BOP format.

You can use this as an example to check the different formats in which the informations should be provided.

Notes:

This is experimental. The default parameters for the pipeline should give good results in many scenarios (we use the same on YCB-Video and T-LESS) but we have yet not conducted experiments in many custom scenarios. If you are trying to apply CosyPose to your own 6D pose estimations and encounter any issues or would like to obtain better results, please consider sharing your experience, I would be very happy to help you.
The script is quite slow to run for a single scene because all models need to be loaded and the first cuda call with pytorch is always slow. If you would like to use this for an application, consider using directly the API of the MultiviewScenePredictor in your own code. You can use the script scripts/run_custom_scenario.py as an example on how to use it.
While the object candidate matching stage (stage 2 of CosyPose) is fairly optimized using a combination of C++ and fully batched operations in pytorch on GPU, the stage 3 (global scene refinement via object-level bundle adjustment) could largely be sped up. The implementation would benefit from being written in C++ with a standard optimization framework instead of using pytorch to compute full jacobians for Levenberg-Marquart. If you find this stage to be too slow for your problem/application, please open an issue or let me know. If there is demand for a faster implementation, I may provide it in the future.

BOP20 models and results

Click for details...

We provide the training code that we used to train single-view single-object pose estimation models on the 7 core datasets (LM-O, TLESS, TUD-L, IC-BIN, ITODD, HB, YCB-V) and pre-trained detector and pose estimation models. Note that these models are different from the ones used in the paper. The differences with the models used in the paper are the following:

In the paper, we use already available detectors for T-LESS and YCB-Video. For the BOP20 challenge, we trained our own detectors on each dataset.
Detection and pose estimation models are trained using PBR synthetic images provided with the BOP challenge instead of using our own synthetic data to make it easier to compare fairly with the other approaches.
In the BOP20 challenge results, the initialization of the pose provided to the coarse model is slightly different. First, the canonical orientation has been changed to have the z-axis parallel to the camera instead of having the x-axis parallel to the camera, a position with z-axis upward and parallel to the camera makes the overall shape and details of the objects more visible. Second, instead of fixing the z value of the canonical translation to 1 meter, we compute a guess of object depth using the height and width of the 2D bounding box and the 3D model. This makes the method more general as the canonical depth is always within a reasonable range of the correct depth even if the object is very far from the camera.

Even though the challenge is focused on single-view pose estimation, we also reported multi-view results on YCB-Video, T-LESS and HB for 4 and 8 views.

Downloading BOP datasets

python -m cosypose.scripts.download --bop_dataset=DATASET --pbr_training_images
python -m cosypose.scripts.download --urdf_models=DATASET

for DATASET={hb,icbin,itodd,lm,lmo,tless,tudl,ycbv}. If you are not interested in training the models, you can remove the flag --pbr_training_images and you can omit lm.

Downloading pre-trained models

You can download all the models that we trained for the challenge using our downloading script:

python -m cosypose.scripts.download --model=model_id

where model_id is given by the table below:

Dataset	Model type	Training images	`model_id`
hb	detector	PBR	detector-bop-hb-pbr--497808
hb	coarse	PBR	coarse-bop-hb-pbr--7075
hb	refiner	PBR	refiner-bop-hb-pbr--247731

icbin	detector	PBR	detector-bop-icbin-pbr--947409
icbin	coarse	PBR	coarse-bop-icbin-pbr--915044
icbin	refiner	PBR	refiner-bop-icbin-pbr--841882

lmo	detector	PBR	detector-bop-lmo-pbr--517542
lmo	coarse	PBR	coarse-bop-lmo-pbr--707448
lmo	refiner	PBR	refiner-bop-lmo-pbr--325214

itodd	detector	PBR	detector-bop-itodd-pbr--509908
itodd	coarse	PBR	coarse-bop-itodd-pbr--681884
itodd	refiner	PBR	refiner-bop-itodd-pbr--834427

tless	detector	PBR	detector-bop-tless-pbr--873074
tless	coarse	PBR	coarse-bop-tless-pbr--506801
tless	refiner	PBR	refiner-bop-tless-pbr--233420
tless	detector	SYNT+REAL	detector-bop-tless-synt+real--452847
tless	coarse	SYNT+REAL	coarse-bop-tless-synt+real--160982
tless	refiner	SYNT+REAL	refiner-bop-tless-synt+real--881314

tudl	detector	PBR	detector-bop-tudl-pbr--728047
tudl	coarse	PBR	coarse-bop-tudl-pbr--373484
tudl	refiner	PBR	refiner-bop-tudl-pbr--487212
tudl	detector	SYNT+REAL	detector-bop-tudl-synt+real--298779
tudl	coarse	SYNT+REAL	coarse-bop-tudl-synt+real--610074
tudl	refiner	SYNT+REAL	refiner-bop-tudl-synt+real--423239

ycbv	detector	PBR	detector-bop-ycbv-pbr--970850
ycbv	coarse	PBR	coarse-bop-ycbv-pbr--724183
ycbv	refiner	PBR	refiner-bop-ycbv-pbr--604090
ycbv	detector	SYNT+REAL	detector-bop-ycbv-synt+real--292971
ycbv	coarse	SYNT+REAL	coarse-bop-ycbv-synt+real--822463
ycbv	refiner	SYNT+REAL	refiner-bop-ycbv-synt+real--631598

The detectors are MaskRCNN models with resnet50 FPN backbone. PBR corresponds to training only on provided synthetic images. SYNT+REAL corresponds to training on all available synthetic and real images when available (only for tless, tudl and ycbv). SYNT+REAL models are pre-trained from PBR.

If you want to use all the models for a complete evaluation:

python -m cosypose.scripts.download --all_bop20_models

Running inference

The following commands will reproduce the results that we reported on the leaderboard for all the datasets:

# CosyPose-ECCV20-PBR-1VIEW
python -m cosypose.scripts.run_bop_inference --config bop-pbr

# CosyPose-ECCV20-SYNT+REAL-1VIEW
python -m cosypose.scripts.run_bop_inference --config bop-synt+real

# CosyPose-ECCV20-SYNT+REAL-1VIEW-ICP
python -m cosypose.scripts.run_bop_inference --config bop-synt+real --icp

# CosyPose-ECCV20-SYNT+REAL-4VIEWS
python -m cosypose.scripts.run_bop_inference --config bop-synt+real --nviews=4

# CosyPose-ECCV20-SYNT+REAL-8VIEWS
python -m cosypose.scripts.run_bop_inference --config bop-synt+real --nviews=8

The inference script is compatible with runjob.

Inference results on all datasets can be downloaded directly:

python -m cosypose.scripts.download --result_id=result_id

where result_id is given by the table below

BOP20 method name	`result_id`
CosyPose-ECCV20-PBR-1VIEW	bop-pbr--223026
CosyPose-ECCV20-SYNT+REAL-1VIEW	bop-synt+real--815712
CosyPose-ECCV20-SYNT+REAL-1VIEW-ICP	bop-synt+real-icp--121351
CosyPose-ECCV20-SYNT+REAL-4VIEWS	bop-synt+real-nviews=4--419066
CosyPose-ECCV20-SYNT+REAL-8VIEWS	bop-synt+real-nviews=8--763684

If you want to download everything:

python -m cosypose.scripts.download --all_bop20_results

Notes:

The ICP refiner was adapted from Pix2Pose code. Be careful if you want to use it, it slightly decrease performance over RGB-only on T-LESS instead of improving the results. Qualitative results show a misalignment of many objects after ICP, there is likely a small bug with my version but I haven't had time to go in detail. Note that our method and paper are focused on the RGB-only setting.

Running evaluation

You can run locally the evaluation on the publicly available test sets:

python -m cosypose.scripts.run_bop20_eval_multi --result_id=result_id --method=method

where method is maskrcnn_detections/refiner/iteration=4 for single-view, maskrcnn_detections/icp when ICP is ran, and maskrcnn_detections/multiview for multi-view (n_views > 1).

If you are only interested in generating the bop predictions file suitable for submission to the website, you can run

python -m cosypose.scripts.run_bop20_eval_multi --result_id=result_id --method=method --convert_only

Training details

Detection

We use torchvision's MaskRCNN implementation for the detection. The models were trained using:

runjob --ngpus=32 python -m cosypose.scripts.run_detector_training --config bop-DATASET-TRAINING_IMAGES

where DATASET={lmo,tless,tudl,icbin,itodd,hb,ycbv} and TRAINING_IMAGES={pbr,synt+real} (synt+real only for datasets where real images are available: tless, tudl and ycbv).

Pose estimation

runjob --ngpus=32 python -m cosypose.scripts.run_pose_training --config bop-DATASET-TRAINING_IMAGES-MODEL_TYPE

where MODEL_TYPE={coarse,refiner}.

Name		Name	Last commit message	Last commit date
Latest commit History 32 Commits
cosypose		cosypose
data		data
deps		deps
images		images
notebooks		notebooks
.clang-format		.clang-format
.gitattributes		.gitattributes
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
README.md		README.md
config_yann.yaml		config_yann.yaml
environment.yaml		environment.yaml
job-runner-config.yaml		job-runner-config.yaml
job-runner-preamble.sh		job-runner-preamble.sh
rclone.conf		rclone.conf
setup.py		setup.py
tox.ini		tox.ini

License

swtyree/cosypose

Folders and files

Latest commit

History

Repository files navigation

CosyPose: Consistent multi-view multi-object 6D pose estimation

Yann Labbé, Justin Carpentier, Mathieu Aubry, Josef Sivic ECCV: European Conference on Computer Vision, 2020 [Paper] [Project page] [Video (1 min)] [Video (10 min)] [Slides] Winner of the BOP Challenge 2020 at ECCV'20 [slides] [BOP challenge paper]

Citation

News

Table of content

Overview

Single-view single-object 6D pose estimator

Synthetic data generation

Multi-view multi-object scene reconstruction

BOP challenge 2020: single-view 2D detection + 6D pose estimation models

Installation

Downloading and preparing data

BOP Datasets

Pre-trained models for single-view estimator

2D detections

Note on GPU parallelization

Single gpu on a single node

Configuration of job-runner for multi-gpu usage

Multi-gpu on a single node

On a SLURM cluster

Reproducing single-view results

YCB-Video

T-LESS

Single-view visualization

Training the single-view 6D pose estimation models

Downloading synthetic images

Synthetic data generation script

Textures for domain randomization

Recording a synthetic dataset

Visualizing images of the dataset

Background images for data augmentation

Training script

Reproducing multi-view results

Multi-view visualization

Using CosyPose in a custom scenario

BOP20 models and results

Downloading BOP datasets

Downloading pre-trained models

Running inference

Running evaluation

Training details

Detection

Pose estimation

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Yann Labbé, Justin Carpentier, Mathieu Aubry, Josef Sivic

ECCV: European Conference on Computer Vision, 2020

[Paper] [Project page] [Video (1 min)] [Video (10 min)] [Slides]

Winner of the BOP Challenge 2020 at ECCV'20 [slides] [BOP challenge paper]

Configuration of `job-runner` for multi-gpu usage

Packages