Skip to content

Latest commit

 

History

History
217 lines (175 loc) · 6.76 KB

getting-started-linux.md

File metadata and controls

217 lines (175 loc) · 6.76 KB
Raw

Getting Started on Red Hat Enterprise Linux

This guide is tailored towards RHEL, but should work on other distros as well.
You might need to

Change default shell to bash(Optional)

The directions here are given for a bash shell. If you are using a Red Hat laptop the default shell should be bash. If it is not and you want to change it to bash you can do the following step.

  1. Launch the Terminal app
  2. Change default shell to bash 
    % chsh -s /bin/bash
  3. You’ll be prompt to enter your password. Then, close the terminal and reopen it. The terminal will come back with bash prompt "$".

Install Development Tools

  1. Launch the Terminal app
  2. Run the command to install the group Development Tools: 
    $ sudo dnf groupinstall 'Development Tools'

Verify

  1. Run this command: 
    $ gcc --version
  2. Verify you see the following: 
    gcc (GCC) 8.4.1 20200928 (Red Hat 8.4.1-1)

Install Docker

  1. Follow the directions here which are also summarized below. 
    sudo yum install -y yum-utils
sudo yum-config-manager \
    --add-repo \
    https://download.docker.com/linux/centos/docker-ce.repo
sudo yum install docker-ce docker-ce-cli containerd.io
sudo groupadd docker
sudo usermod -aG docker $USER
  2. Start the docker daemon and make it so that it start automatically at boot. 
    sudo systemctl enable docker
  3. Restarting you computer may be needed in order for the next step to work.

Verify

  1. Run this command: 
    $ docker run --rm hello-world
  2. Verify you see output something like the following: 
    (...)
Hello from Docker!
(...)

Install minikube

  1. Follow the directions here.
    The steps are also given below:

    sudo yum -y install qemu-kvm libvirt libvirt-daemon-kvm
sudo systemctl enable libvirtd
sudo systemctl start libvirtd

# Optionally check that your laptop supports VT technology.
virt-host-validate

# Check that firewalld is running
systemctl status firewalld

  2. Create a file at /etc/yum.repos.d with the following contents

    [kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-$basearch
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg

  3. Install and set up kubectl and additional tooling

    sudo yum -y install kubectl
wget https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64 -O minikube
wget https://storage.googleapis.com/minikube/releases/latest/docker-machine-driver-kvm2
chmod 755 minikube docker-machine-driver-kvm2
sudo mv minikube docker-machine-driver-kvm2 /usr/local/bin/

Install Go

  1. Please see here for the latest version used at StackRox that you should download.
    Follow the directions here to install Go.

Verify

  1. Run the command to inspect the version of Go that was just installed. It should be what you expect: 
    $ go version

go version go1.16.5 linux/amd64 # This should reflect the version you just installed

Install RocksDB dependencies

  1. Instructions for installing RocksDB dependencies can be found here. The steps for RHEL can be found below: 
    sudo yum install snappy-devel

# If this fails, you may need to install snappy manually, using the following commands
wget http://mirror.centos.org/centos/8/PowerTools/x86_64/os/Packages/snappy-devel-1.1.8-3.el8.x86_64.rpm
sudo yum install cmake-filesystem
sudo rpm -Uvh snappy-devel-1.1.8-3.el8.x86_64.rpm

Install RocksDB

  1. Download & install rocksdb v6.15.4: GitHub Release Page 
    wget https://github.com/facebook/rocksdb/archive/refs/tags/v6.15.4.tar.gz
tar -xvf v6.15.4.tar.gz
cd rocksdb-6.15.4/
make shared_lib static_lib
sudo make install-shared install-static
CGO_CFLAGS="-I/usr/local/include" CGO_LDFLAGS="-L/usr/local/lib/librocksdb.a"   go get github.com/tecbot/gorocksdb

Install npm

  1. Install npm 
    sudo yum install npm
sudo npm install --global yarn
  2. Install nvm 
    curl https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash  
source ~/.bashrc
  3. Update node 
    nvm install 12.13.0

Verify

```
node --version

v12.13.0 # This should match the version you installed with nvm
```

Install bats

This is a helpful resource

```
wget https://download-ib01.fedoraproject.org/pub/epel/7/x86_64/Packages/b/bats-0.4.0-1.20141016git3b33a5a.el7.noarch.rpm
sudo rpm -Uvh bats-0.4.0-1.20141016git3b33a5a.el7.noarch.rpm
```

Install gradle

  1. Install gradle 6.7.1. Get it from here. Use the binary version.
  2. Add the following to your .bashrc file 
    export PATH=$PATH:<PATH_TO_GRADLE>/gradle-6.7.1/bin
source ~/.bashrc

Install Helm

  1. Follow the directions here which are summarized below.
  2. Download the correct version of helm here 
    $ tar -zxvf helm-v3.6.2-linux-amd64.tar.gz
$ cd linux-amd64/ #Or wherever your helm binary is
$ sudo cp helm /usr/local/bin/

Verify

  1. Run the command to inspect the version of Helm that was just installed 
    $ helm version
version.BuildInfo{Version:"v3.6.2", (...)}

Install Workflow Scripts

  1. Clone the workflow repository: 
    # If you choose to follow the opinionated golang installation of putting everything into a "go" folder:
$ mkdir -p ~/go/src/github.com/stackrox/
$ cd ~/go/src/github.com/stackrox/
$ git clone [email protected]:stackrox/workflow.git
  2. Follow the steps in the repo's README

Verify

  1. Run roxhelp in the terminal to verify correct installation.
    $ roxhelp

    Usage:
    /Users/ross/go/src/github.com/stackrox/workflow/bin/roxhelp <command_name> (to print help for command <command_name>)
    /Users/ross/go/src/github.com/stackrox/workflow/bin/roxhelp --list-all (to list all available Rox commands)