Version: 1.3
Author: Andre 'Staltz' Medeiros [email protected]
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
The ssb scheme is registered as provisional under the IANA, but its format is not yet specified accessibly and clearly. This documents aims at providing the first specification of SSB URIs, as they are used in existing applications and will be adopted increasingly in more use cases.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.
There is a thread on SSB, %g3hPVPDEO1Aj/uPl0+J2NlhFB2bbFLIHlty+YuqFZ3w=.sha256, where several participants gave their thoughts on the design of the SSB URI format, with several proposals put into consideration. The format of Query-only URIs were inspired by Magnet URIs.
ssb-uri is one outcome of that discussion, and is referred to in the IANA page. The ssb-uri library is depended on in Patchwork. As an alternative library, ssb-custom-uri is used in Patchfox. Patchfoo supports both ssb-uri and ssb-custom-uri. Manyverse supports the URIs in this specification via the library ssb-uri2.
The specification in this document is compatible with ssb-uri while adding support for expressing more resources.
- Canonical SSB URIs
ssb:message/classic/<MSGID>ssb:message/bendybutt-v1/<MSGID>ssb:message/gabbygrove-v1/<MSGID>ssb:message/buttwoo-v1/<MSGID>ssb:message/indexed-v1/<MSGID>ssb:message/cloaked/<KEY>ssb:feed/classic/<FEEDID>ssb:feed/bendybutt-v1/<FEEDID>ssb:feed/gabbygrove-v1/<FEEDID>ssb:feed/buttwoo-v1/<FEEDID>ssb:feed/buttwoo-v1/<FEEDID>/<PARENTMSGID>ssb:feed/indexed-v1/<FEEDID>ssb:blob/classic/<BLOBID>ssb:address/multiserver?multiserverAddress=<MSADDR>ssb:encryption-key/box2-dm-dh/<KEY>ssb:identity/po-box/<KEY>ssb:identity/group/<KEY>ssb:identity/fusion/<KEY>
- Experimental SSB URIs
ssb:experimental?action=claim-http-invite&invite=<CODE>&multiserverAddress=<MSADDR>ssb:experimental?action=consume-alias&alias=<A>&userId=<UID>&signature=<SIG>&roomId=<RID>&multiserverAddress=<MSADDR>ssb:experimental?action=start-http-auth&sid=<SID>&sc=<SC>
- Deprecated SSB URIs
ssb:message/sha256/<MSGID>ssb:feed/ed25519/<FEEDID>ssb:blob/sha256/<BLOBID>
There are two main categories of SSB URIs: Canonical and Experimental. The conceptual difference between these two is that canonical SSB URIs make use of the path component in the URI to specify the resource, while experimental SSB URIs use only the query component to specify the resource.
The third category, Deprecated, is used to denote canonical SSB URIs that MUST still be supported by application, but SHOULD be avoided whenever possible.
These SSB URIs are to be considered stable and universally acceptable by all SSB applications that support SSB URIs. They utilize the path component to specify "refs", i.e. identifiers for resources. SSB messages, feeds, and blobs SHOULD follow the respective syntaxes:
ssb:message/classic/<MSGID>
ssb:message/bendybutt-v1/<MSGID>
ssb:message/gabbygrove-v1/<MSGID>
ssb:message/buttwoo-v1/<MSGID>
ssb:message/indexed-v1/<MSGID>
ssb:feed/classic/<FEEDID>
ssb:feed/bendybutt-v1/<FEEDID>
ssb:feed/gabbygrove-v1/<FEEDID>
ssb:feed/buttwoo-v1/<FEEDID>
ssb:feed/buttwoo-v1/<FEEDID>/<PARENTMSGID>
ssb:feed/indexed-v1/<FEEDID>
ssb:blob/classic/<BLOBID>
Where <MSGID>, <FEEDID>, <BLOBID> are URI-safe Base64 encoded strings that identify those refs. URI-safe Base64 is equivalent to Base64 where + characters are replaced with -, and / characters are replaced with _.
In the special case of ssb:feed/buttwoo-v1/<FEEDID>/<PARENTMSGID>, the <PARENTMSGID> is the URI-safe Base64 encoded data of a buttwoo-v1 message URI (i.e. <MSGID> from ssb:message/buttwoo-v1/<MSGID>).
Examples:
ssb:message/classic/g3hPVPDEO1Aj_uPl0-J2NlhFB2bbFLIHlty-YuqFZ3w=
ssb:message/bendybutt-v1/PR2-btDEO1AjXuPl0TJ2N_hFB2bbFLIHlty0VF1ncty=
ssb:feed/classic/-oaWWDs8g73EZFUMfW37R_ULtFEjwKN_DczvdYihjbU=
ssb:feed/bendybutt-v1/APaWWDs8g73EZFUMfW37RBULtFEjwKNbDczvdYiRXtA=
ssb:feed/gabbygrove-v1/FY5OG311W4j_KPh8H9B2MZt4WSziy_p-ABkKERJdujQ=
ssb:blob/classic/sbBmsB7XWvmIzkBzreYcuzPpLtpeCMDIs6n_OJGSC1U=
There are also new concepts related to Private Groups which need identifiers, such as:
ssb:encryption-key/box2-dm-dh/<KEY>ssb:identity/po-box/<KEY>
Where <KEY> are URI-safe Base64 encoded strings, similar to the previous canonical SSB URIs.
Multiserver address:
ssb:address/multiserver?multiserverAddress=<MSADDR>
Where <MSADDR> is a multiserver address string, but percent-encoded according to RFC3986 2.1, for example:
ssb:address/multiserver?multiserverAddress=net%3Awx.larpa.net%3A8008~shs%3ADTNmX%2B4SjsgZ7xyDh5xxmNtFqa6pWi5Qtw7cE8aR9TQ%3D
Canonical SSB URIs SHOULD use / to separate the parts of the path component, but they MAY also use : to separate the parts. The following syntax is acceptable (and is currently what ssb-uri utilizes, exclusively):
ssb:message:classic:<MSGID>
ssb:message:bendybutt-v1:<MSGID>
ssb:feed:classic:<FEEDID>
ssb:feed:bendybutt-v1:<FEEDID>
ssb:blob:classic:<BLOBID>
ssb:address:multiserver?multiserverAddress=<MSADDR>
These SSB URIs are free-form and allow developers to pass any parameters to SSB applications without requiring consensus among the SSB applications. These URIs have an empty authority component and path component always matching experimental (this is to support Firefox's handling of custom schemes) but have a non-empty query component. The query parameters are the only mechanism through which information is conveyed. They satisfy the syntax below (any number of parameters allowed, but we show two, for illustration):
ssb:experimental?<key1>=<value1>
ssb:experimental?<key1>=<value1>&<key2>=<value2>
Experimental SSB URIs do not need to be included in this specification before they can be used, but we encourage developers to submit all known experimental SSB URIs depended by applications. This facilitates the future canonicalization of new SSB URIs. Please feel free to submit new entries here, as long as you know they are used in applications:
Action to join a room:
Some experimental SSB URIs have the query action to describe intents to perform certain tasks in the SSB application.
A action=claim-http-invite experimental URI is used to refer to the consumption of a Rooms 2 invite code, syntax as follows, which includes a multiserverAddress query like the canonical multiserver address URI has too:
ssb:experimental?action=claim-http-invite&invite=<CODE>&multiserverAddress=<MSADDR>`
Action to consume an alias:
A URI with query action=consume-alias allows us to refer to the processing consuming a room alias, syntax as follows:
ssb:experimental?action=consume-alias&alias=<A>&userId=<UID>&signature=<SIG>&multiserverAddress=<MSADDR>&roomId=<RID>
Action to start HTTP authentication:
A URI with query action=start-http-auth is for initiating Sign-in with SSB (HTTP Authentication) with an SSB remote server. The syntax is as follows:
ssb:experimental?action=start-http-auth&sid=<SID>&sc=<SC>
When experimental SSB URIs are adopted by SSB applications, if they are deemed useful and long-term URIs, there should be discussion among stakeholders (SSB application developers, and protocol developers) to specify a canonical SSB URI format (using path component) to replace the experimental SSB URI. Then, the new canonical SSB URI should be specified in this document.
The following grammar specifies all SSB URIs (both canonical and any experimental) using Nearley:
uri -> scheme delimiter body
scheme -> "ssb"
delimiter -> ":"
separator -> [:/]
body -> parts1 (queries):? | parts3 (queries):? | parts4 (queries):?
parts1 -> type1
parts3 -> type3 separator alg3 separator value
parts4 -> type4 separator alg4 separator value separator value
queries -> "?" (query):+
query -> queryKey "=" queryVal
queryKey -> [a-zA-Z] ([^=]):*
queryVal -> [a-zA-Z0-9] ([^&]):*
type1 -> "experimental"
type3 -> "message" | "feed" | "blob" | "address" | "encryption-key" | "identity"
type4 -> "feed"
alg3 -> "classic" | "multiserver" | "bendybutt-v1" | "gabbygrove-v1" | "buttwoo-v1" | "indexed-v1" | "cloaked" | "box2-dm-dh" | "po-box" | "group" | "fusion"
alg4 -> "buttwoo-v1"
value -> ([0-9a-zA-Z\-\_\=]):+