# Template design for ZYNQ and ZYNQ Ultrascale+ This project is a collection of scripts to automate the generation of the necessary files to boot a minimal image of Linux on the Xilinx ZYNQ-based development boards. By editing the script for `scripts/vivado.tcl`, users can instantiate their own IP blocks on the programmable logic. The device tree will be updated automatically. The root file system has been generated with the template projects from Petalinux. Users can replace or customize the content of `out/<BOARD>/root` to add more features. The default password is `SLD#xil.33`. Scripts are tested with Vivado 2018.2. Please clone with the `--recursive` option to fetch Xilinx source files for Linux, U-boot, device tree and ARM trusted firmware. ``` $ git clone --recursive git@github.com:sld-columbia/zynq-template.git ``` ## Supported Development Boards - Zynq ZC702 and ZC706 - Zynq Ultrascale+ ZCU102 ZCU106 ## Usage ``` $ [ETHADDR=<xx:xx:xx:xx:xx:xx>] [BOARD=<zc702|zc706|zcu102|zcu106>] make ``` If `BOARD` is not specified, make will generate the output for the ZYNQ zc702 board. You can set a fixed MAC address by defining `ETHADDR` when you invoke make. If you do not specify the address, a randomly generated one will be used. All configuration files, temporary built objects and boot images will be generated in `out/<BOARD>`. This includes the files to copy onto SD card to boot on hardware. Please refer to [Xilinx Wiki](https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842385/How+to+format+SD+card+for+SD+boot) to partition and format the SD card appropriately.