So how do you use this library? Well, it's pretty easy. Just follow this
template. First, set up an enum with all of your API targets. Note that you
can include information as part of your enum. Let's look at a common example. First we create a new file named MyService.swift:
enum MyService {
case Zen
case ShowUser(id: Int)
case CreateUser(firstName: String, lastName: String)
}This enum is used to make sure that you provide implementation details for each
target (at compile time). You can see that parameters needed for requests can be defined as per the enum cases parameters. The enum must additionally conform to the TargetType protocol. Let's get this done via an extension in the same file:
// MARK: - TargetType Protocol Implementation
extension MyService: TargetType {
var baseURL: NSURL { return NSURL(string: "https://api.myservice.com")! }
var path: String {
switch self {
case .Zen:
return "/zen"
case .ShowUser(let id):
return "/users/\(id)"
case .CreateUser(_, _):
return "/users"
}
}
var method: Moya.Method {
switch self {
case .Zen, .ShowUser:
return .GET
case .CreateUser:
return .POST
}
}
var parameters: [String: AnyObject]? {
switch self {
case .Zen, .ShowUser:
return nil
case .CreateUser(let firstName, let lastName):
return ["first_name": firstName, "last_name": lastName]
}
}
var sampleData: NSData {
switch self {
case .Zen:
return "Half measures are as bad as nothing at all.".UTF8EncodedData
case .ShowUser(let id):
return "{\"id\": \(id), \"first_name\": \"Harry\", \"last_name\": \"Potter\"}".UTF8EncodedData
case .CreateUser(let firstName, let lastName):
return "{\"id\": 100, \"first_name\": \"\(firstName)\", \"last_name\": \"\(lastName)\"}".UTF8EncodedData
}
}
}
// MARK: - Helpers
private extension String {
var URLEscapedString: String {
return self.stringByAddingPercentEncodingWithAllowedCharacters(NSCharacterSet.URLHostAllowedCharacterSet())!
}
var UTF8EncodedData: NSData {
return self.dataUsingEncoding(NSUTF8StringEncoding)!
}
}(The String extension is just for convenience – you don't have to use it.)
You can see that the TargetType protocol makes sure that each value of the enum translates into a full request. Each full request is split up into the baseURL, the path specifying the subpath of the request, the method which defines the HTTP method and optionally parameters to be added to the request.
Note that at this point you have added enough information for a basic API networking layer to work. By default Moya will combine all the given parts into a full request:
let provider = MoyaProvider<MyService>()
provider.request(.CreateUser(firstName: "James", lastName: "Potter")) { result in
// do something with the result (read on for more details)
}
// The full request will result to the following (by default):
// POST https://api.myservice.com/users?first_name=James&last_name=PotterThe TargetType specifies both a base URL for the API and the sample data for
each enum value. The sample data are NSData instances, and could represent
JSON, images, text, whatever you're expecting from that endpoint.
You can also set up custom endpoints to alter the default behavior to your needs. For example:
public func url(route: TargetType) -> String {
return route.baseURL.URLByAppendingPathComponent(route.path).absoluteString
}
let endpointClosure = { (target: MyService) -> Endpoint<MyService> in
return Endpoint<MyService>(URL: url(target), sampleResponseClosure: {.NetworkResponse(200, target.sampleData)}, method: target.method, parameters: target.parameters)
}The block you provide will be invoked every time an API call is to be made. Its
responsibility is to return an Endpoint instance configured for use by Moya.
parameters is passed into this block to allow you to configure the Endpoint
instance – these parameters are not automatically passed onto the network
request, so add them to the Endpoint if they should be. They could be some
data internal to the app that help configure the Endpoint. In this example,
though, they're just passed right through.
Most of the time, this closure is just a straight translation from target,
method, and parameters, into an Endpoint instance. However, since it's a
closure, it'll be executed at each invocation of the API, so you could do
whatever you want. Say you want to test network error conditions like timeouts, too.
let failureEndpointClosure = { (target: MyService) -> Endpoint<MyService> in
let sampleResponseClosure = { () -> (EndpointSampleResponse) in
if shouldTimeout {
return .NetworkError(NSError())
} else {
return .NetworkResponse(200, target.sampleData)
}
}
return Endpoint<MyService>(URL: url(target), sampleResponseClosure: sampleResponseClosure, method: target.method, parameters: target.parameters)
}Notice that returning sample data is required. One of the key benefits of Moya is that it makes testing the app or running the app using stubbed responses for API calls really easy.
Great, now we're all set. Just need to create our provider.
// Tuck this away somewhere where it'll be visible to anyone who wants to use it
var provider: MoyaProvider<MyService>!
// Create this instance at app launch
let provider = MoyaProvider(endpointClosure: endpointClosure)Neato. Now how do we make a request?
provider.request(.Zen) { result in
// do something with `result`
}The request method is given a MyService value (.Zen), which contains all the
information necessary to create the Endpoint – or to return a stubbed
response during testing.
The Endpoint instance is used to create a NSURLRequest (the heavy lifting is
done via Alamofire), and the request is sent (again - Alamofire). Once
Alamofire gets a response (or fails to get a response), Moya will wrap the
success or failure in a Result enum. result is either
.Success(Moya.Response) or .Failure(Moya.Error).
You will need to unpack the data and status code from Moya.Response.
provider.request(.Zen) { result in
switch result {
case let .Success(moyaResponse):
let data = moyaResponse.data // NSData, your JSON response is probably in here!
let statusCode = moyaResponse.statusCode // Int - 200, 401, 500, etc
// do something in your app
case let .Failure(error):
// TODO: handle the error == best. comment. ever.
}
}Take special note: a .Failure means that the server either didn't receive the
request (e.g. reachability/connectivity error) or it didn't send a response
(e.g. the request timed out). If you get a .Failure, you probably want to
re-send the request after a time delay or when an internet connection is
established.
Once you have a .Success(response) you might want to filter on status codes or
convert the response data to JSON. Moya.Response can help!
do {
try moyaResponse.filterSuccessfulStatusCodes()
let data = try moyaResponse.mapJSON()
}
catch {
// show an error to your user
}