Getting Started

Make sure you have supported hardware

Supported Hardware

Getting Started - for Users

Please note that there is no stable release yet.

Get a ScreenInvader disk image

You can download the latest ScreenInvader armhf image from http://176.9.60.212/release.cgi

Write it to an SD-Card

#replace mmcblkX with the correct device name.
sudo dd if=image.dd of=/dev/mmcblkX

Boot it

Insert the SD Card into your hardware.

Getting Started - for Development

You can download the latest ScreenInvader test image from http://176.9.60.212/debug.cgi