Unsupported device found! chuangmi.ir.v2

[nkolev2]

Any advice on the error i`ve got after upgrade to v 0.64 ... could be even from lower version?

2018-02-26 15:09:50 ERROR (MainThread) [homeassistant.components.switch.xiaomi_miio] Unsupported device found! Please create an issue at https://github.com/rytilahti/python-miio/issues and provide the following data: chuangmi.ir.v2

configuration.yaml:

# xiaomi ir remote
  - platform: xiaomi_miio
    name: "Kitchen remote"
    host: 192.168.1.230
    token: !secret chuangmi_key

(homeassistant) homeassistant@DietPiEv3r:~/.homeassistant$ mirobo --ip=192.168.1.230 --token=<chuangmi_key> -d info
INFO:miio.vacuum_cli:Debug mode active
DEBUG:miio.vacuum_cli:Connecting to 192.168.1.230 with token <chuangmi_key>
DEBUG:miio.protocol:Unable to decrypt, returning raw bytes: b''
DEBUG:miio.device:Got a response: Container:
    data = Container:
        data =  (total 0)
        value =  (total 0)
        offset1 = 32
        offset2 = 32
        length = 0
    header = Container:
        data = !1\x00 \x00\x00\x00\x00\x03K\xfa#\x00t\xeb\xd5 (total 16)
        value = Container:
            length = 32
            unknown = 0
            device_id = \x03K\xfa# (total 4)
            ts = 1970-03-30 16:29:09
        offset1 = 0
        offset2 = 16
        length = 16
    checksum = \xd0\xeb\xf2\x02\xbb\x1e\x91\xac\x1a\xc7\xcd\xff\xf6\x8b\x92\x86 (total 16)
DEBUG:miio.device:Discovered 034bfa23 with ts: 1970-03-30 16:29:09, token: b'<chuangmi_key>'
DEBUG:miio.device:192.168.1.230:54321 >>: {'id': 1, 'method': 'miIO.info', 'params': []}
DEBUG:miio.device:192.168.1.230:54321 (ts: 1970-03-30 16:29:10, id: 1) << {'result': {'life': 7662550, 'cfg_time': 0, 'token': '<chuangmi_key>', 'mac': '<mac>', 'fw_ver': '1.2.4_38', 'hw_ver': 'MC200', 'model': 'chuangmi.ir.v2', 'wifi_fw_ver': 'SD878x-14.76.36.p79-702.1.0-WM', 'ap': {'rssi': -14, 'ssid': 'mikalp', 'bssid': '<mac>'}, 'netif': {'localIp': '192.168.1.230', 'mask': '255.255.255.0', 'gw': '192.168.1.1'}, 'mmfree': 45992, 'ot': 'ott', 'otu_stat': [442, 392, 2293, 13, 2226, 41], 'ott_stat': [117, 422, 528, 4761]}, 'id': 1}
chuangmi.ir.v2 v1.2.4_38 (<mac>) @ 192.168.1.230 - token: <chuangmi_key>
DEBUG:miio.vacuum_cli:Full response: {'ap': {'bssid': '<mac>', 'rssi': -14, 'ssid': 'mikalp'},
 'cfg_time': 0,
 'fw_ver': '1.2.4_38',
 'hw_ver': 'MC200',
 'life': 7662550,
 'mac': '<mac>',
 'mmfree': 45992,
 'model': 'chuangmi.ir.v2',
 'netif': {'gw': '192.168.1.1',
           'localIp': '192.168.1.230',
           'mask': '255.255.255.0'},
 'ot': 'ott',
 'ott_stat': [117, 422, 528, 4761],
 'otu_stat': [442, 392, 2293, 13, 2226, 41],
 'token': '<chuangmi_key>',
 'wifi_fw_ver': 'SD878x-14.76.36.p79-702.1.0-WM'}
DEBUG:miio.vacuum_cli:Writing {'seq': 1, 'manual_seq': 0} to /home/homeassistant/.cache/python-miio/python-mirobo.seq

(homeassistant) homeassistant@DietPiEv3r:~/.homeassistant$ python --version
Python 3.6.4rc1

appreciate your help ...
Thanks

[syssi]

Your configuration is wrong. You tried to configure the remote controller as "switch" instead of a "remote" control:

# switch: <-- replace this by remote / move the configuration block
remote:
  - platform: xiaomi_miio
    name: "Kitchen remote"
    host: 192.168.1.230
    token: !secret chuangmi_key

[nkolev2]

ah, why i didn't see that :), thanks a lot syssi , its fine now.

[syssi]

@nkolev2 Do you own a rooted android device and could you do me a favor?