Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Driver would not load on MBP Early 2015 #118

Open
slashrsm opened this issue Jan 6, 2017 · 4 comments
Open

Driver would not load on MBP Early 2015 #118

slashrsm opened this issue Jan 6, 2017 · 4 comments

Comments

@slashrsm
Copy link

slashrsm commented Jan 6, 2017

First things first :) I did check existing issues with the same error message and made sure I am in the input group:

➜  ~  groups
sys adm lp wheel input usbmux docker git slashrsm

My config is:

Section "InputClass"
    MatchIsTouchpad "on"
    Identifier "Touchpads"
    Driver "mtrack"
EndSection

And the most relevant part of the xorg log is:

[  1029.046] (II) Module mtrack: vendor="X.Org Foundation"
[  1029.046] 	compiled for 1.18.4, module version = 0.2.0
[  1029.046] 	Module class: X.Org XInput Driver
[  1029.046] 	ABI class: X.Org XInput driver, version 22.1
[  1029.046] (II) Using input driver 'mtrack' for 'bcm5974'
[  1029.046] (**) bcm5974: always reports core events
[  1029.046] (**) bcm5974: always reports core events
[  1029.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input8/mouse1"
[  1029.046] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 14)
[  1029.046] (II) device control: init
[  1029.046] (**) Option "Device" "/dev/input/mouse1"
[  1029.046] (EE) mtrack: cannot configure device
[  1029.046] (EE) Couldn't init device "bcm5974"
[  1029.046] (II) UnloadModule: "mtrack"

I would be very thankful for any clues.

Full log:

[  1028.976] (--) Log file renamed from "/home/slashrsm/.local/share/xorg/Xorg.pid-7383.log" to "/home/slashrsm/.local/share/xorg/Xorg.0.log"
[  1028.976] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[  1028.976] X Protocol Version 11, Revision 0
[  1028.976] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[  1028.976] Current Operating System: Linux pineapple 4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 x86_64
[  1028.976] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda3:Pineapple root=/dev/Pineapple/root rw quiet libata.atapi_passthru16=0
[  1028.976] Build Date: 19 July 2016  05:54:24PM
[  1028.976]  
[  1028.976] Current version of pixman: 0.34.0
[  1028.976] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1028.976] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1028.976] (==) Log file: "/home/slashrsm/.local/share/xorg/Xorg.0.log", Time: Fri Jan  6 22:16:45 2017
[  1028.976] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1028.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1028.976] (==) No Layout section.  Using the first Screen section.
[  1028.976] (==) No screen section available. Using defaults.
[  1028.976] (**) |-->Screen "Default Screen Section" (0)
[  1028.976] (**) |   |-->Monitor "<default monitor>"
[  1028.977] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1028.977] (==) Automatically adding devices
[  1028.977] (==) Automatically enabling devices
[  1028.977] (==) Automatically adding GPU devices
[  1028.977] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1028.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1028.977] 	Entry deleted from font path.
[  1028.977] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1028.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1028.977] 	Entry deleted from font path.
[  1028.977] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1028.977] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[  1028.977] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1028.977] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1028.977] (II) Loader magic: 0x821d40
[  1028.977] (II) Module ABI versions:
[  1028.977] 	X.Org ANSI C Emulation: 0.4
[  1028.977] 	X.Org Video Driver: 20.0
[  1028.977] 	X.Org XInput driver : 22.1
[  1028.977] 	X.Org Server Extension : 9.0
[  1028.977] (++) using VT number 3

[  1028.978] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c9
[  1028.979] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1028.979] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[  1028.980] (--) PCI:*(0:0:2:0) 8086:162b:106b:013f rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[  1028.980] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1028.980] (II) LoadModule: "glx"
[  1028.980] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1028.981] (II) Module glx: vendor="X.Org Foundation"
[  1028.981] 	compiled for 1.18.4, module version = 1.0.0
[  1028.981] 	ABI class: X.Org Server Extension, version 9.0
[  1028.981] (==) AIGLX enabled
[  1028.981] (==) Matched intel as autoconfigured driver 0
[  1028.981] (==) Matched intel as autoconfigured driver 1
[  1028.981] (==) Matched modesetting as autoconfigured driver 2
[  1028.981] (==) Matched fbdev as autoconfigured driver 3
[  1028.981] (==) Matched vesa as autoconfigured driver 4
[  1028.981] (==) Assigned the driver to the xf86ConfigLayout
[  1028.981] (II) LoadModule: "intel"
[  1028.981] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1028.981] (II) Module intel: vendor="X.Org Foundation"
[  1028.981] 	compiled for 1.18.4, module version = 2.99.917
[  1028.981] 	Module class: X.Org Video Driver
[  1028.981] 	ABI class: X.Org Video Driver, version 20.0
[  1028.981] (II) LoadModule: "modesetting"
[  1028.981] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1028.981] (II) Module modesetting: vendor="X.Org Foundation"
[  1028.981] 	compiled for 1.18.4, module version = 1.18.4
[  1028.981] 	Module class: X.Org Video Driver
[  1028.981] 	ABI class: X.Org Video Driver, version 20.0
[  1028.981] (II) LoadModule: "fbdev"
[  1028.981] (WW) Warning, couldn't open module fbdev
[  1028.981] (II) UnloadModule: "fbdev"
[  1028.981] (II) Unloading fbdev
[  1028.981] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1028.981] (II) LoadModule: "vesa"
[  1028.981] (WW) Warning, couldn't open module vesa
[  1028.982] (II) UnloadModule: "vesa"
[  1028.982] (II) Unloading vesa
[  1028.982] (EE) Failed to load module "vesa" (module does not exist, 0)
[  1028.982] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  1028.982] (II) intel: Driver for Intel(R) HD Graphics
[  1028.982] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[  1028.982] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[  1028.982] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1028.982] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  1028.982] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[  1028.982] (II) intel(0): SNA compiled from 2.99.917-746-g169c74f
[  1028.982] (WW) Falling back to old probe method for modesetting
[  1028.982] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  1028.982] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 6100
[  1028.982] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[  1028.982] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1028.982] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1028.982] (==) intel(0): RGB weight 888
[  1028.982] (==) intel(0): Default visual is TrueColor
[  1028.982] (II) intel(0): Output eDP1 has no monitor section
[  1028.993] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[  1028.993] (II) intel(0): Enabled output eDP1
[  1028.993] (II) intel(0): Output DP1 has no monitor section
[  1028.993] (II) intel(0): Enabled output DP1
[  1028.993] (II) intel(0): Output HDMI1 has no monitor section
[  1028.993] (II) intel(0): Enabled output HDMI1
[  1028.993] (II) intel(0): Output DP2 has no monitor section
[  1028.993] (II) intel(0): Enabled output DP2
[  1028.993] (II) intel(0): Output HDMI2 has no monitor section
[  1028.993] (II) intel(0): Enabled output HDMI2
[  1028.993] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  1028.993] (II) intel(0): Output VIRTUAL1 has no monitor section
[  1028.993] (II) intel(0): Enabled output VIRTUAL1
[  1028.993] (--) intel(0): Output eDP1 using initial mode 2560x1600 on pipe 0
[  1028.993] (==) intel(0): TearFree disabled
[  1028.993] (==) intel(0): DPI set to (96, 96)
[  1028.993] (II) Loading sub module "dri3"
[  1028.993] (II) LoadModule: "dri3"
[  1028.993] (II) Module "dri3" already built-in
[  1028.993] (II) Loading sub module "dri2"
[  1028.993] (II) LoadModule: "dri2"
[  1028.993] (II) Module "dri2" already built-in
[  1028.993] (II) Loading sub module "present"
[  1028.993] (II) LoadModule: "present"
[  1028.993] (II) Module "present" already built-in
[  1028.993] (II) UnloadModule: "modesetting"
[  1028.993] (II) Unloading modesetting
[  1028.993] (==) Depth 24 pixmap format is 32 bpp
[  1028.993] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[  1028.993] (==) intel(0): Backing store enabled
[  1028.993] (==) intel(0): Silken mouse enabled
[  1028.994] (II) intel(0): HW Cursor enabled
[  1028.994] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1028.994] (==) intel(0): DPMS enabled
[  1028.994] (==) intel(0): Display hotplug detection enabled
[  1028.994] (II) intel(0): [DRI2] Setup complete
[  1028.994] (II) intel(0): [DRI2]   DRI driver: i965
[  1028.994] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  1028.994] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[  1028.994] (II) intel(0): hardware support for Present enabled
[  1028.994] (--) RandR disabled
[  1029.001] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1029.001] (II) AIGLX: enabled GLX_ARB_create_context
[  1029.001] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1029.001] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  1029.001] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1029.001] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1029.001] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1029.001] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1029.001] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  1029.001] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1029.001] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1029.002] (II) AIGLX: Loaded and initialized i965
[  1029.002] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1029.006] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1029.012] (II) intel(0): Setting screen physical size to 677 x 423
[  1029.035] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[  1029.035] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1029.035] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1029.035] (II) LoadModule: "libinput"
[  1029.035] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1029.036] (II) Module libinput: vendor="X.Org Foundation"
[  1029.036] 	compiled for 1.18.4, module version = 0.22.0
[  1029.036] 	Module class: X.Org XInput Driver
[  1029.036] 	ABI class: X.Org XInput driver, version 22.1
[  1029.036] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 13 paused 0
[  1029.036] (II) Using input driver 'libinput' for 'Power Button'
[  1029.036] (**) Power Button: always reports core events
[  1029.036] (**) Option "Device" "/dev/input/event6"
[  1029.036] (**) Option "_source" "server/udev"
[  1029.037] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[  1029.037] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[  1029.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[  1029.037] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1029.037] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[  1029.037] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[  1029.037] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[  1029.037] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1029.037] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1029.037] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 0
[  1029.037] (II) Using input driver 'libinput' for 'Video Bus'
[  1029.037] (**) Video Bus: always reports core events
[  1029.037] (**) Option "Device" "/dev/input/event12"
[  1029.037] (**) Option "_source" "server/udev"
[  1029.038] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[  1029.038] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[  1029.038] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[  1029.038] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1029.038] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[  1029.038] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[  1029.038] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  1029.038] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1029.038] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1029.038] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 17 paused 0
[  1029.038] (II) Using input driver 'libinput' for 'Power Button'
[  1029.038] (**) Power Button: always reports core events
[  1029.038] (**) Option "Device" "/dev/input/event4"
[  1029.038] (**) Option "_source" "server/udev"
[  1029.039] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[  1029.039] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[  1029.039] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[  1029.039] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1029.039] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[  1029.039] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[  1029.039] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  1029.039] (II) No input driver specified, ignoring this device.
[  1029.039] (II) This device may have been added with another device file.
[  1029.039] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[  1029.039] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1029.039] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1029.039] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 18 paused 0
[  1029.039] (II) Using input driver 'libinput' for 'Sleep Button'
[  1029.039] (**) Sleep Button: always reports core events
[  1029.039] (**) Option "Device" "/dev/input/event5"
[  1029.039] (**) Option "_source" "server/udev"
[  1029.040] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[  1029.040] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[  1029.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event5"
[  1029.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  1029.040] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[  1029.040] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[  1029.040] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[  1029.040] (II) No input driver specified, ignoring this device.
[  1029.040] (II) This device may have been added with another device file.
[  1029.040] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[  1029.040] (II) No input driver specified, ignoring this device.
[  1029.040] (II) This device may have been added with another device file.
[  1029.041] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[  1029.041] (II) No input driver specified, ignoring this device.
[  1029.041] (II) This device may have been added with another device file.
[  1029.041] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/event0)
[  1029.041] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "evdev keyboard catchall"
[  1029.041] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "libinput keyboard catchall"
[  1029.041] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[  1029.041] (II) Using input driver 'libinput' for 'Broadcom Corp. Bluetooth USB Host Controller'
[  1029.041] (**) Broadcom Corp. Bluetooth USB Host Controller: always reports core events
[  1029.041] (**) Option "Device" "/dev/input/event0"
[  1029.041] (**) Option "_source" "server/udev"
[  1029.041] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event0 is tagged by udev as: Keyboard
[  1029.041] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event0 is a keyboard
[  1029.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:05AC:8290.0001/input/input0/event0"
[  1029.041] (II) XINPUT: Adding extended input device "Broadcom Corp. Bluetooth USB Host Controller" (type: KEYBOARD, id 10)
[  1029.042] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event0 is tagged by udev as: Keyboard
[  1029.042] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event0 is a keyboard
[  1029.042] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/event1)
[  1029.042] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "evdev pointer catchall"
[  1029.042] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "libinput pointer catchall"
[  1029.042] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20 paused 0
[  1029.042] (II) Using input driver 'libinput' for 'Broadcom Corp. Bluetooth USB Host Controller'
[  1029.042] (**) Broadcom Corp. Bluetooth USB Host Controller: always reports core events
[  1029.042] (**) Option "Device" "/dev/input/event1"
[  1029.042] (**) Option "_source" "server/udev"
[  1029.042] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event1 is tagged by udev as: Mouse
[  1029.042] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event1 is a pointer caps
[  1029.043] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:05AC:8290.0002/input/input1/event1"
[  1029.043] (II) XINPUT: Adding extended input device "Broadcom Corp. Bluetooth USB Host Controller" (type: MOUSE, id 11)
[  1029.043] (**) Option "AccelerationScheme" "none"
[  1029.043] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) selected scheme none/0
[  1029.043] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) acceleration factor: 2.000
[  1029.043] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) acceleration threshold: 4
[  1029.043] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event1 is tagged by udev as: Mouse
[  1029.043] (II) input device 'Broadcom Corp. Bluetooth USB Host Controller', /dev/input/event1 is a pointer caps
[  1029.043] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/mouse0)
[  1029.043] (II) No input driver specified, ignoring this device.
[  1029.043] (II) This device may have been added with another device file.
[  1029.043] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event2)
[  1029.043] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[  1029.043] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "libinput keyboard catchall"
[  1029.044] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
[  1029.044] (II) Using input driver 'libinput' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[  1029.044] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[  1029.044] (**) Option "Device" "/dev/input/event2"
[  1029.044] (**) Option "_source" "server/udev"
[  1029.044] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event2 is tagged by udev as: Keyboard
[  1029.044] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event2 is a keyboard
[  1029.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:05AC:0273.0004/input/input2/event2"
[  1029.044] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 12)
[  1029.044] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event2 is tagged by udev as: Keyboard
[  1029.044] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event2 is a keyboard
[  1029.045] (II) config/udev: Adding input device bcm5974 (/dev/input/event8)
[  1029.045] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[  1029.045] (**) bcm5974: Applying InputClass "Touchpads"
[  1029.045] (**) bcm5974: Applying InputClass "libinput touchpad catchall"
[  1029.045] (**) bcm5974: Applying InputClass "libinput touchpad catchall"
[  1029.045] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 22 paused 0
[  1029.045] (II) Using input driver 'libinput' for 'bcm5974'
[  1029.045] (**) bcm5974: always reports core events
[  1029.045] (**) Option "Device" "/dev/input/event8"
[  1029.045] (**) Option "_source" "server/udev"
[  1029.045] (II) input device 'bcm5974', /dev/input/event8 is tagged by udev as: Touchpad
[  1029.045] (II) input device 'bcm5974', /dev/input/event8 is a touchpad
[  1029.045] (**) Option "NaturalScrolling" "false"
[  1029.045] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input8/event8"
[  1029.045] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 13)
[  1029.045] (**) Option "AccelerationScheme" "none"
[  1029.045] (**) bcm5974: (accel) selected scheme none/0
[  1029.045] (**) bcm5974: (accel) acceleration factor: 2.000
[  1029.045] (**) bcm5974: (accel) acceleration threshold: 4
[  1029.046] (II) input device 'bcm5974', /dev/input/event8 is tagged by udev as: Touchpad
[  1029.046] (II) input device 'bcm5974', /dev/input/event8 is a touchpad
[  1029.046] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse1)
[  1029.046] (**) bcm5974: Applying InputClass "Touchpads"
[  1029.046] (II) LoadModule: "mtrack"
[  1029.046] (II) Loading /usr/lib/xorg/modules/input/mtrack_drv.so
[  1029.046] (II) Module mtrack: vendor="X.Org Foundation"
[  1029.046] 	compiled for 1.18.4, module version = 0.2.0
[  1029.046] 	Module class: X.Org XInput Driver
[  1029.046] 	ABI class: X.Org XInput driver, version 22.1
[  1029.046] (II) Using input driver 'mtrack' for 'bcm5974'
[  1029.046] (**) bcm5974: always reports core events
[  1029.046] (**) bcm5974: always reports core events
[  1029.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input8/mouse1"
[  1029.046] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 14)
[  1029.046] (II) device control: init
[  1029.046] (**) Option "Device" "/dev/input/mouse1"
[  1029.046] (EE) mtrack: cannot configure device
[  1029.046] (EE) Couldn't init device "bcm5974"
[  1029.046] (II) UnloadModule: "mtrack"
[  1029.046] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[  1029.046] (II) No input driver specified, ignoring this device.
[  1029.046] (II) This device may have been added with another device file.
[  1029.046] (II) config/udev: Adding input device HDA Intel PCH SPDIF (/dev/input/event11)
[  1029.046] (II) No input driver specified, ignoring this device.
[  1029.046] (II) This device may have been added with another device file.
[  1029.047] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[  1029.047] (II) No input driver specified, ignoring this device.
[  1029.047] (II) This device may have been added with another device file.
[  1029.047] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[  1029.047] (II) No input driver specified, ignoring this device.
[  1029.047] (II) This device may have been added with another device file.
[  1029.235] (II) intel(0): EDID vendor "APP", prod id 41002
[  1029.235] (II) intel(0): Printing DDC gathered Modelines:
[  1029.235] (II) intel(0): Modeline "2560x1600"x0.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP)
@duncanfinney
Copy link

I'm seeing the same thing. I am running Manjaro linux on a Macbook Pro 13 inch Early 2015.

MacbookPro 12,1

@svenper
Copy link

svenper commented Jun 29, 2017

Same issue for me with MacBookPro12,1 on Void Linux

@Jens0512
Copy link

Same issue here.On MacBookAir4,1 1.0

% pacman -Qi xf86-input-mtrack-git
Name            : xf86-input-mtrack-git
Version         : 0.5.0.r5.gf09dc9b-1
Description     : A multitouch X driver using the kernel MT protocol
Architecture    : x86_64
URL             : http://github.com/p2rkw/xf86-input-mtrack
Licenses        : GPL
Groups          : None
Provides        : xf86-input-mtrack
Depends On      : mtdev  libxss
Optional Deps   : None
Required By     : None
Optional For    : None
Conflicts With  : xf86-input-mtrack  xf86-input-synaptics
Replaces        : None
Installed Size  : 90.00 KiB
Packager        : Unknown Packager
Build Date      : Thu 02 Aug 2018 18:05:30 CEST
Install Date    : Thu 02 Aug 2018 18:06:49 CEST
Install Reason  : Explicitly installed
Install Script  : Yes
Validated By    : None

% uname -mors
Linux 4.18.7-arch1-1-ARCH x86_64 GNU/Linux

@svenper
Copy link

svenper commented Sep 22, 2018

IIRC a workaround for this is to run these commands at boot:

modprobe -r usbmouse
modprobe -r bcm5974
modprobe bcm5974

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@slashrsm @duncanfinney @svenper @Jens0512