From 9530df4816ed409e79c7b0403613e663f0d63511 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 21 Feb 2022 19:54:03 -0600 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Update=20Toolchange=20FS=20comme?= =?UTF-8?q?nts?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration_adv.h | 8 ++++---- Marlin/src/libs/nozzle.cpp | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index f2676828fffb..2d1b14107dcb 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2417,7 +2417,7 @@ #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) // Load / Unload #define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length - #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode) + #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart. Adjust with LCD or M217 B. #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/min) (Unloading) #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down) @@ -2431,12 +2431,12 @@ #define TOOLCHANGE_FS_FAN_SPEED 255 // 0-255 #define TOOLCHANGE_FS_FAN_TIME 10 // (seconds) - // Swap uninitialized extruder with TOOLCHANGE_FS_PRIME_SPEED for all lengths (recover + prime) + // Swap uninitialized extruder (using TOOLCHANGE_FS_PRIME_SPEED feedrate) // (May break filament if not retracted beforehand.) //#define TOOLCHANGE_FS_INIT_BEFORE_SWAP - // Prime on the first T0 (If other, TOOLCHANGE_FS_INIT_BEFORE_SWAP applied) - // Enable it (M217 V[0/1]) before printing, to avoid unwanted priming on host connect + // Prime on the first T0 (For other tools use TOOLCHANGE_FS_INIT_BEFORE_SWAP) + // Enable with M217 V1 before printing to avoid unwanted priming on host connect //#define TOOLCHANGE_FS_PRIME_FIRST_USED /** diff --git a/Marlin/src/libs/nozzle.cpp b/Marlin/src/libs/nozzle.cpp index 5cd2014d7f86..4ca8fa2cae1e 100644 --- a/Marlin/src/libs/nozzle.cpp +++ b/Marlin/src/libs/nozzle.cpp @@ -263,7 +263,7 @@ Nozzle nozzle; case 2: do_blocking_move_to_y(park.y, fr_xy); break; case 3: do_blocking_move_to_x(park.x, fr_xy); do_blocking_move_to_y(park.y, fr_xy); break; - case 4: do_blocking_move_to_y(park.y, fr_xy); + case 4: do_blocking_move_to_y(park.y, fr_xy); do_blocking_move_to_x(park.x, fr_xy); break; }