feat(tools/opt-dist): allow local builds to specify a rustc-perf checkout #125125
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
rustbot has assigned @Mark-Simulacrum. Use |
rustbot
added
the
S-waiting-on-review
|
@bors r+ rollup |
bors
added
S-waiting-on-bors
|
☀️ Test successful - checks-actions |
|
Finished benchmarking commit (8387315): comparison URL. Overall result: no relevant changes - no action needed@rustbot label: -perf-regression Instruction countThis benchmark run did not return any relevant results for this metric. Max RSS (memory usage)Results (primary -1.2%)This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.
CyclesThis benchmark run did not return any relevant results for this metric. Binary sizeThis benchmark run did not return any relevant results for this metric. Bootstrap: 679.638s -> 678.372s (-0.19%) |
bors
pushed a commit
to rust-lang-ci/rust
that referenced
this pull request
May 16, 2024
Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
May 16, 2024
refactor: add rustc-perf submodule to src/tools Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
May 17, 2024
refactor: add rustc-perf submodule to src/tools Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
lovesegfault
added a commit
to lovesegfault/rust
that referenced
this pull request
May 17, 2024
Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
lovesegfault
added a commit
to lovesegfault/rust
that referenced
this pull request
May 20, 2024
Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
May 20, 2024
…k-Simulacrum refactor: add rustc-perf submodule to src/tools Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313ad RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313ad. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
weihanglo
added a commit
to weihanglo/rust
that referenced
this pull request
May 23, 2024
These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) These crates are the default set of packages required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in an sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
matthiaskrgr
added a commit
to matthiaskrgr/rust
that referenced
this pull request
May 24, 2024
bootstrap: vendor crates required by opt-dist to collect profiles These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
flip1995
pushed a commit
to flip1995/rust-clippy
that referenced
this pull request
May 24, 2024
refactor: add rustc-perf submodule to src/tools Currently, it's very challenging to perform a sandboxed `opt-dist` bootstrap because the tool requires `rustc-perf` to be present, but there is no proper management/tracking of it. Instead, a specific commit is hardcoded where it is needed, and a non-checksummed zip is fetched ad-hoc. This happens in two places: `src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`: ```dockerfile ENV PERF_COMMIT 4f313add609f43e928e98132358e8426ed3969ae RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \ unzip perf.zip && \ mv rustc-perf-$PERF_COMMIT rustc-perf && \ rm perf.zip ``` `src/tools/opt-dist/src/main.rs` ```rust // FIXME: add some mechanism for synchronization of this commit SHA with // Linux (which builds rustc-perf in a Dockerfile) // rustc-perf version from 2023-10-22 const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae"; let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip"); let client = reqwest::blocking::Client::builder() .timeout(Duration::from_secs(60 * 2)) .connect_timeout(Duration::from_secs(60 * 2)) .build()?; let response = retry_action( || Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()), "Download rustc-perf archive", 5, )?; ``` This causes a few issues: 1. Maintainers need to be careful to bump PERF_COMMIT in both places every time 2. In order to run `opt-dist` in a sandbox, you need to provide your own `rustc-perf` (rust-lang/rust#125125), but to figure out which commit to provide you need to grep the Dockerfile 3. Even if you manage to provide the correct `rustc-perf`, its dependencies are not included in the `vendor/` dir created during `dist`, so it will fail to build from the published source tarballs 4. It is hard to provide any level of automation around updating the `rustc-perf` in use, leading to staleness Fundamentally, this means `rustc-src` tarballs no longer contain everything you need to bootstrap Rust, and packagers hoping to leverage `opt-dist` need to go out of their way to keep track of this "hidden" dependency on `rustc-perf`. This change adds rustc-perf as a git submodule, pinned to the current `PERF_COMMIT` 4f313add609f43e928e98132358e8426ed3969ae. Subsequent commits ensure the submodule is initialized when necessary, and make use of it in `opt-dist`.
weihanglo
added a commit
to weihanglo/rust
that referenced
this pull request
May 31, 2024
These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) These crates are the default set of packages required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in an sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
celinval
pushed a commit
to celinval/rust-dev
that referenced
this pull request
Jun 4, 2024
Update Rust toolchain from nightly-2024-05-14 to nightly-2024-05-15 without any other source changes. This is an automatically generated pull request. If any of the CI checks fail, manual intervention is required. In such a case, review the changes at https://github.com/rust-lang/rust from rust-lang@ab14f94 up to rust-lang@8387315. The log for this commit range is: rust-lang@8387315ab3 Auto merge of rust-lang#125125 - lovesegfault:opt-dist-specify-rustc-perf, r=Mark-Simulacrum rust-lang@c3c9783de2 feat(tools/opt-dist): allow local builds to specify a rustc-perf checkout rust-lang@ac385a5af6 Auto merge of rust-lang#125120 - compiler-errors:rollup-mnjybwv, r=compiler-errors rust-lang@31016d5879 Rollup merge of rust-lang#125118 - GuillaumeGomez:cleanup-run-make, r=jieyouxu rust-lang@d59f430eec Rollup merge of rust-lang#125100 - compiler-errors:faster, r=nnethercote rust-lang@712e7c37f7 Rollup merge of rust-lang#125088 - compiler-errors:uplift-alias-ty, r=lcnr rust-lang@8c64acdbdc Rollup merge of rust-lang#125080 - bvanjoi:fix-124946, r=nnethercote rust-lang@844c7e826e Rollup merge of rust-lang#125047 - Oneirical:test5, r=jieyouxu rust-lang@0458d8a53b Rollup merge of rust-lang#124844 - compiler-errors:shadow-probe, r=lcnr rust-lang@36287830a2 Rollup merge of rust-lang#119838 - joshtriplett:style-guide-binop-indent, r=compiler-errors rust-lang@ade33b02f2 only find segs chain for missing methods when no available candidates rust-lang@bdfd941f4d Auto merge of rust-lang#123816 - tgross35:f16-f128-mangling, r=michaelwoerister rust-lang@f97d915173 Use new utility functions/methods in run-make tests rust-lang@792a9bdd4b Enable v0 mangling tests and add checks for `f16`/`f128` rust-lang@809b84edba Add v0 symbol mangling for `f16` and `f128` rust-lang@31026b7fe3 Auto merge of rust-lang#125023 - morr0ne:linux-none-target, r=Nilstrieb rust-lang@68407f9049 fix typo in x86_64-unknown-linux-none docs rust-lang@c45e831d8f Auto merge of rust-lang#124228 - compiler-errors:lint-overcaptures, r=oli-obk rust-lang@58426f4a5b Auto merge of rust-lang#125026 - Oneirical:clink-tests, r=jieyouxu rust-lang@e098eb14ae Wording improvement rust-lang@e2d9c0d938 Fix missing word rust-lang@57c32a193f style-guide: When breaking binops handle multi-line first operand better rust-lang@dbd2ca6478 Use a proper probe for shadowing impl rust-lang@052de1da4f And finally add tests rust-lang@1529c661e4 Warn against redundant use<...> rust-lang@f3fb727b08 Don't suggest using use<> syntax to capture APITs rust-lang@6afe1352d9 Suggest adding use<> syntax rust-lang@554becc180 Add some commenting rust-lang@d57e57ca1f Implement initial IMPL_TRAIT_OVERCAPTURES lint rust-lang@8f97a2588c Add test to make sure suggestions are still quick rust-lang@fba5f44bd8 Auto merge of rust-lang#125098 - jhpratt:rollup-2qm4gga, r=jhpratt rust-lang@45b50d303c lto function, static_library call, rename rust-lang@9f8cdb286e Remove to_term rust-lang@1ad28a6f53 Uplift AliasTy rust-lang@812f89728a fix fmt rust-lang@2e4c90c3f7 Don't do post-method-probe error reporting steps if we're in a suggestion rust-lang@32d74f1800 Rollup merge of rust-lang#125090 - erickt:bump-fuchsia, r=tmandry rust-lang@209703af85 Rollup merge of rust-lang#125072 - Darksonn:pin-dyn-dispatch-sound, r=jhpratt rust-lang@18d9c039bb Rollup merge of rust-lang#124997 - gurry:124848-ice-should-be-sized, r=Nadrieril rust-lang@74a78af0e2 Rollup merge of rust-lang#116675 - joshlf:patch-10, r=scottmcm rust-lang@9105c57b7f Auto merge of rust-lang#124256 - nnethercote:rm-NtIdent-NtLifetime, r=petrochenkov rust-lang@34582118af Auto merge of rust-lang#125076 - compiler-errors:alias-term, r=lcnr rust-lang@95e519ecbf Remove `NtIdent` and `NtLifetime`. rust-lang@fa84018c2e Apply nits rust-lang@58ee9192e0 Migrate fuchsia docs from `pm` to `ffx` rust-lang@293b5cb1ca [ptr] Document maximum allocation size rust-lang@3bcdf3058e split out AliasTy -> AliasTerm rust-lang@b3a78c1d09 Add test for dynamic dispatch + Pin::new soundness rust-lang@9a63a42cb7 Remove a `Span` from `TokenKind::Interpolated`. rust-lang@71fd2cf5b4 fix function call and import rust-lang@a1b5ea0cc2 make tidy happy rust-lang@f2de5fb2ae rewrite issue-14500 to rmake rust-lang@a6f237ca85 docs: fix typo in platform-support docs rust-lang@923cdb35aa test: Add assembly tests for x86_64-unknown-linux-none target rust-lang@10c358f111 Make tidy happy rust-lang@e37d2989c1 remove trailing whitespace rust-lang@a2e7e79a13 Port c-link-to-rust-va-list-fn to Rust rust-lang@9cf080099d docs: Document x86_64-unknown-linux-none target rust-lang@a3ef01b1fc Add x86_64-unknown-linux-none target rust-lang@fb619ec208 FIx ICE while casting a type with error Co-authored-by: tautschnig <[email protected]>
weihanglo
added a commit
to weihanglo/rust
that referenced
this pull request
Jun 5, 2024
These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) These crates are the default set of packages required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in an sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
weihanglo
added a commit
to weihanglo/rust
that referenced
this pull request
Jun 9, 2024
These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) These crates are the default set of packages required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in an sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
jieyouxu
added a commit
to jieyouxu/rust
that referenced
this pull request
Jun 9, 2024
…Simulacrum bootstrap: vendor crates required by opt-dist to collect profiles These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
jieyouxu
added a commit
to jieyouxu/rust
that referenced
this pull request
Jun 9, 2024
…Simulacrum bootstrap: vendor crates required by opt-dist to collect profiles These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
rust-timer
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Jun 9, 2024
Rollup merge of rust-lang#125465 - weihanglo:opt-dist-vendor, r=Mark-Simulacrum bootstrap: vendor crates required by opt-dist to collect profiles These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
lcnr
pushed a commit
to lcnr/rust
that referenced
this pull request
Jun 12, 2024
These are the default package set required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in a sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) These crates are the default set of packages required by opt-dist to correctly work, hence for people wanting to build a production grade of rustc in an sandboxed / air-gapped environment, these need to be vendored. The size of `rustc-src-nightly.tar.xz` before and after this change: * Before: 298M * After: 323M (+8%) Size change might or might not be a concern. See the previous discussion: rust-lang#125166 (comment) Previous efforts on making: * rust-lang#125125 * rust-lang#125166 --- Note that extra works still need to be done to make it fully vendored. * The current pinned rustc-perf uses `tempfile::Tempdir` as the working directory when collecting profiles from some of these packages. This "tmp" working directory usage make it impossible for Cargo to pick up the correct vendor sources setting in `.cargo/config.toml` bundled in the rustc-src tarball. [^1] * opt-dist verifies the final built rustc against a subset of rustc test suite. However it rolls out its own `config.toml` without setting `vendor = true`, and that results in `./vendor/` directory removed. [^2] [^1]: https://github.com/rust-lang/rustc-perf/blob/4f313add609f43e928e98132358e8426ed3969ae/collector/src/compile/benchmark/mod.rs#L164-L173 [^2]: https://github.com/rust-lang/rust/blob/606afbb617a2949a4e35c4b0258ff94c980b9451/src/tools/opt-dist/src/tests.rs#L62-L77
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is a first step towards allowing
opt-distto work in a sandboxed /air-gapped environment, as it allows users to bypass the ad-hoc download of
rustc-perf.