Skip to content

Latest commit

 

History

History
25 lines (14 loc) · 1.03 KB

README.md

File metadata and controls

25 lines (14 loc) · 1.03 KB

GPIO-Driver Logo

GPIO-Driver

GitHub code size in bytes GitHub issues

A driver to interact with general-purpose input-output pins on an STM32F767

Installation

  1. Clone the repository by doing git clone https://github.com/rohanperi/GPIO-Driver.git in your terminal.
  2. Make sure you have Keil µVision® IDE: hhttps://www2.keil.com/mdk5/uvision/
  3. Have your Microcontroller (MCU) ready, I used an STM32F767 but other MCUs from ST can work too!
  4. Open this project in Keil µVision®, making sure your MCU is connected to your PC, then build and run the code

Usage

Once the code is run, the on-board LED should be blinking! Feel free to edit the code and use this driver for any other GPIO of choice!

Parts

MCU: https://www.st.com/en/microcontrollers-microprocessors/stm32f767zi.html