README.md

Documentation

• Infix In-Depth
  • Infix Variants
  • Boot Procedure
  • Containers in Infix
  • Developer's Guide
  • Discover Your Device
  • Virtual Environments
  • Origin & Licensing
• CLI Topics
  • Introduction to the CLI
  • CLI User's Guide
  • Quick Overview

Infix is a Linux Network Operating System (NOS) based on Buildroot, and sysrepo. A powerful mix that ease porting to different platforms, simplify long-term maintenance, and provide made-easy management using NETCONF¹ (remote) or the built-in CLI.

Example CLI Session

The CLI configure context is automatically generated from the loaded YANG models and their corresponding sysrepo plugins. The following is brief example of how to set the IP address of an interface:

admin@infix-12-34-56:/> configure
admin@infix-12-34-56:/config/> edit interfaces interface eth0
admin@infix-12-34-56:/config/interfaces/interface/eth0/> set ipv4 <TAB>
      address     autoconf bind-ni-name      enabled
	  forwarding  mtu      neighbor
admin@infix-12-34-56:/config/interfaces/interface/eth0/> set ipv4 address 192.168.2.200 prefix-length 24
admin@infix-12-34-56:/config/interfaces/interface/eth0/> show
type ethernetCsmacd;
ipv4 address 192.168.2.200 prefix-length 24;
ipv6 enabled true;
admin@infix-12-34-56:/config/interfaces/interface/eth0/> diff
interfaces {
  interface eth0 {
+    ipv4 {
+      address 192.168.2.200 {
+        prefix-length 24;
+      }
+    }
  }
}
admin@infix-12-34-56:/config/interfaces/interface/eth0/> leave
admin@infix-12-34-56:/> show interfaces brief
lo               UNKNOWN        00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
eth0             UP             52:54:00:12:34:56 <BROADCAST,MULTICAST,UP,LOWER_UP>
admin@infix-12-34-56:/> show ip brief
lo               UNKNOWN        127.0.0.1/8 ::1/128
eth0             UP             192.168.2.200/24 fe80::5054:ff:fe12:3456/64
admin@infix-12-34-56:/> copy running-config startup-config

Click here for more details.

Infix can run on many different types of architectures and boards, much thanks to Linux and Buildroot. Currently the focus is on 64-bit ARM devices, optionally with switching fabric supported by Linux switchdev. The following boards are fully supported:

• Marvell CN9130 CRB
• Marvell EspressoBIN
• Microchip SparX-5i PCB135 (eMMC)

An x86_64 build is also available, primarily intended for development and testing, but can also be used for evaluation and demo purposes. For more information, see: Infix in Virtual Environments.

See the GitHub Releases page for our pre-built images. The Latest Build has the bleeding edge images, if possible we recommend using a versioned release.

For customer specific builds of Infix, see your product repository.

Footnotes

1. NETCONF or RESTCONF, https://datatracker.ietf.org/doc/html/rfc8040, for more information, see Infix Variants. ↩