parameters in config.ini

[joe63]

Hallo,
I have a HM-800 on an HUB2000 and want to use sf-control.

1.) should the values for the following parameter be set or is it not necessary (I can let them unchanged = as comment )
#mqtt_port =
#mqtt_user =
#mqtt_pwd =

2.) The HM-800 is connected with 2 channels to the HUB2000. sf_inverter_channels = [3] is OK for 2 channels?

[reinhard-brandstaedter]

1. depends on your MQTT broker configuration. If you use authentication or not
2. should be [1,2] as you use all input channels of the hm800

[joe63]

Thank you!
I found another discussion in the reinhard-brandstaedter/solarflow-bt-manager#18

Can you pls tell me which user/pw I have to use for MQTT broker?

My device ID is: W7798JGG

oder erhält man diese mit dem Kommando:
curl -i -v --json "{'snNumber': 'H**********', 'account': 'j*******@gmx.at'}" https://app.zendure.tech/eu/developer/api/apply

[reinhard-brandstaedter]

The user/pwd you are looking for are for your own local MQTT broker (you have to run one for sf-control).
Use your device ID as user and "B1F8CD0FCD50A822" as password.

[joe63]

Thank you!