Skip to content

within time

Jump to bottom
Hypnos edited this page May 31, 2020 · 6 revisions

within-time-example

[{"id":"bd9bd279.302eb","type":"inject","z":"de4e9c38.0d942","name":"","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":120,"y":1180,"wires":[["b5c283be.eb945"]]},{"id":"273eb4cb.2715fc","type":"debug","z":"de4e9c38.0d942","name":"out1","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","x":590,"y":1180,"wires":[]},{"id":"78f068d6.2fe9f8","type":"debug","z":"de4e9c38.0d942","name":"out2","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","x":590,"y":1220,"wires":[]},{"id":"b5c283be.eb945","type":"within-time-switch","z":"de4e9c38.0d942","name":"","positionConfig":"bdf7c4a.9ca6c38","startTime":"7:00","startTimeType":"entered","startOffset":0,"startOffsetMultiplier":"60","endTime":"9:00","endTimeType":"entered","endOffset":0,"endOffsetMultiplier":"60","property":"","propertyType":"none","startTimeAlt":"","startTimeAltType":"none","startOffsetAlt":0,"startOffsetAltMultiplier":"60","endTimeAlt":"","endTimeAltType":"none","endOffsetAlt":0,"endOffsetAltMultiplier":"60","x":330,"y":1180,"wires":[["273eb4cb.2715fc"],["78f068d6.2fe9f8"]]},{"id":"bdf7c4a.9ca6c38","type":"position-config","z":"","name":"","longitude":"13.71587","latitude":"51.01732","angleType":"deg"}]

within-time - Node settings

A simple node that routes messages depending on the time. If the current time falls within the range specified in the node configuration, the message is routed to output 1. Otherwise the message is routed to output 2.

within-time-settings

  • Position connects to the central configuration node, which contains the current position, but also handles internal shared functions

  • Start time defines the start time of the time range with with different configuration possibilities

    • Start Offset allows to define a positive or negative offset in seconds, minutes or hours to the given Start Time. This will be useful for sun based times.

  • End time defines the end time of the time range with with different configuration possibilities

    • End Offset allows to define a positive or negative offset in seconds, minutes or hours to the given End Time. This will be useful for sun based times.

  • Alternate start time optional defines an alternate start time of the time range which will be used if the conditions matches. This can be used for different times for example of holidays.

    • Start time alternate start time
    • Start Offset offset for the alternate start time

  • Alternate end time optional defines an alternate end time of the time range which will be used if the conditions matches. This can be used for different times for example of holidays.

    • End time alternate end time
    • End Offset offset for the alternate end time

  • resend start If this checkbox is checked and a message arrived outside of time, this message will be additional send again some milliseconds after next start time point. This option is only for fixed time definitions available.

  • resend end If this checkbox is checked and a message arrived within time, this message will be additional send again some milliseconds after next end time point. This option is only for fixed time definitions available.

Home

Installation and Preconditions

base functions

configuration node

Implemented Nodes

CHANGELOG

Clone this wiki locally