From 886c7da55ead6c11a1a0029964795232669b2814 Mon Sep 17 00:00:00 2001 From: Jonathan Bell Date: Mon, 11 Nov 2024 10:30:38 +0000 Subject: [PATCH] drivers: usb: xhci: set HID bit in streaming endpoint contexts The xHC may commence Host Initiated Data Moves for streaming endpoints - see USB3.2 spec s8.12.1.4.2.4. However, this behaviour is typically counterproductive as the submission of UAS URBs in {Status, Data, Command} order and 1 outstanding IO per stream ID means the device never enters Move Data after a HIMD for Status or Data stages with the same stream ID. For OUT transfers this is especially inefficient as the host will start transmitting multiple bulk packets as a burst, all of which get NAKed by the device - wasting bandwidth. Also, some buggy UAS adapters don't properly handle the EP flow control state this creates - e.g. RTL9210. Set Host Initiated Data Move Disable to always defer stream selection to the device. xHC implementations may treat this field as "don't care, forced to 1" anyway - xHCI 1.2 s4.12.1. Signed-off-by: Jonathan Bell --- drivers/usb/host/xhci-mem.c | 8 ++++++++ drivers/usb/host/xhci.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a4af386d6e5b2c..d70f85659af304 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -715,6 +715,14 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK); ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams) | EP_HAS_LSA); + + /* + * Set Host Initiated Data Move Disable to always defer stream + * selection to the device. xHC implementations may treat this + * field as "don't care, forced to 1" anyway - xHCI 1.2 s4.12.1. + */ + ep_ctx->ep_info2 |= EP_HID; + ep_ctx->deq = cpu_to_le64(stream_info->ctx_array_dma); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5b57d775a65fb0..0d0257b4f05473 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -465,6 +465,8 @@ struct xhci_ep_ctx { #define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10) /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ #define EP_HAS_LSA (1 << 15) +/* Host initiated data move disable in info2 */ +#define EP_HID (1 << 7) /* hosts with LEC=1 use bits 31:24 as ESIT high bits. */ #define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) >> 24) & 0xff)