Skip to content

Latest commit

 

History

History
398 lines (278 loc) · 12.9 KB

CONTRIBUTING.md

File metadata and controls

398 lines (278 loc) · 12.9 KB
Raw

Contributing to cuDF

Contributions to cuDF fall into the following categories:

  1. To report a bug, request a new feature, or report a problem with documentation, please file an issue describing the problem or new feature in detail. The RAPIDS team evaluates and triages issues, and schedules them for a release. If you believe the issue needs priority attention, please comment on the issue to notify the team.
  2. To propose and implement a new feature, please file a new feature request issue. Describe the intended feature and discuss the design and implementation with the team and community. Once the team agrees that the plan looks good, go ahead and implement it, using the code contributions guide below.
  3. To implement a feature or bug fix for an existing issue, please follow the code contributions guide below. If you need more context on a particular issue, please ask in a comment.

As contributors and maintainers to this project, you are expected to abide by cuDF's code of conduct. More information can be found at: Contributor Code of Conduct.

Code contributions

Your first issue

  1. Follow the guide at the bottom of this page for Setting up your build environment.
  2. Find an issue to work on. The best way is to look for the good first issue or help wanted labels.
  3. Comment on the issue stating that you are going to work on it.
  4. Create a fork of the cudf repository and check out a branch with a name that describes your planned work. For example, fix-documentation.
  5. Write code to address the issue or implement the feature.
  6. Add unit tests and unit benchmarks.
  7. Create your pull request. To run continuous integration (CI) tests without requesting review, open a draft pull request.
  8. Verify that CI passes all status checks. Fix if needed.
  9. Wait for other developers to review your code and update code as needed.
  10. Once reviewed and approved, a RAPIDS developer will merge your pull request.

If you are unsure about anything, don't hesitate to comment on issues and ask for clarification!

Seasoned developers

Once you have gotten your feet wet and are more comfortable with the code, you can look at the prioritized issues for our next release in our project boards.

Note: Always look at the release board that is currently under development for issues to work on. This is where RAPIDS developers also focus their efforts.

Look at the unassigned issues, and find an issue to which you are comfortable contributing. Start with Step 3 above, commenting on the issue to let others know you are working on it. If you have any questions related to the implementation of the issue, ask them in the issue instead of the PR.

Setting up your build environment

The following instructions are for developers and contributors to cuDF development. These instructions are tested on Ubuntu Linux LTS releases. Use these instructions to build cuDF from source and contribute to its development. Other operating systems may be compatible, but are not currently tested.

Building cudf with the provided conda environment is recommended for users who wish to enable all library features. The following instructions are for building with a conda environment. Dependencies for a minimal build of libcudf without using conda are also listed below.

General requirements

Compilers:

  • gcc version 9.3+
  • nvcc version 11.5+
  • cmake version 3.26.4+

CUDA/GPU:

  • CUDA 11.5+
  • NVIDIA driver 450.80.02+
  • Pascal architecture or better

You can obtain CUDA from https://developer.nvidia.com/cuda-downloads.

Create the build environment

  • Clone the repository:
CUDF_HOME=$(pwd)/cudf
git clone https://github.com/rapidsai/cudf.git $CUDF_HOME
cd $CUDF_HOME

Building with a conda environment

Note: Using a conda environment is the easiest way to satisfy the library's dependencies. Instructions for a minimal build environment without conda are included below.

  • Create the conda development environment:
# create the conda environment (assuming in base `cudf` directory)
# note: RAPIDS currently doesn't support `channel_priority: strict`;
# use `channel_priority: flexible` instead
conda env create --name cudf_dev --file conda/environments/all_cuda-118_arch-x86_64.yaml
# activate the environment
conda activate cudf_dev
  • Note: the conda environment files are updated frequently, so the development environment may also need to be updated if dependency versions or pinnings are changed.

Building without a conda environment

  • libcudf has the following minimal dependencies (in addition to those listed in the General requirements). The packages listed below use Ubuntu package names:

    • build-essential
    • libssl-dev
    • libz-dev
    • libpython3-dev (required if building cudf)

Build cuDF from source

  • A build.sh script is provided in $CUDF_HOME. Running the script with no additional arguments will install the libcudf, cudf and dask_cudf libraries. By default, the libraries are installed to the $CONDA_PREFIX directory. To install into a different location, set the location in $INSTALL_PREFIX. Finally, note that the script depends on the nvcc executable being on your path, or defined in $CUDACXX.
cd $CUDF_HOME

# Choose one of the following commands, depending on whether
# you want to build and install the libcudf C++ library only,
# or include the cudf and/or dask_cudf Python libraries:

./build.sh  # libcudf, cudf and dask_cudf
./build.sh libcudf  # libcudf only
./build.sh libcudf cudf  # libcudf and cudf only
  • Other libraries like cudf-kafka and custreamz can be installed with this script. For the complete list of libraries as well as details about the script usage, run the help command:
./build.sh --help

Build, install and test cuDF libraries for contributors

The general workflow is provided below. Please also see the last section about code formatting.

libcudf (C++)

  • If you're only interested in building the library (and not the unit tests):
cd $CUDF_HOME
./build.sh libcudf
  • If, in addition, you want to build tests:
./build.sh libcudf tests
  • To run the tests:
make test

cudf (Python)

  • First, build the libcudf C++ library following the steps above

  • To build and install in edit/develop cudf Python package:

cd $CUDF_HOME/python/cudf
python setup.py build_ext --inplace
python setup.py develop
  • To run cudf tests:
cd $CUDF_HOME/python
pytest -v cudf/cudf/tests

dask-cudf (Python)

  • First, build the libcudf C++ and cudf Python libraries following the steps above

  • To install the dask-cudf Python package in editable/develop mode:

cd $CUDF_HOME/python/dask_cudf
python setup.py build_ext --inplace
python setup.py develop
  • To run dask_cudf tests:
cd $CUDF_HOME/python
pytest -v dask_cudf

libcudf_kafka (C++)

  • If you're only interested in building the library (and not the unit tests):
cd $CUDF_HOME
./build.sh libcudf_kafka
  • If, in addition, you want to build tests:
./build.sh libcudf_kafka tests
  • To run the tests:
make test

cudf-kafka (Python)

  • First, build the libcudf and libcudf_kafka libraries following the steps above

  • To install the cudf-kafka Python package in editable/develop mode:

cd $CUDF_HOME/python/cudf_kafka
python setup.py build_ext --inplace
python setup.py develop

custreamz (Python)

  • First, build libcudf, libcudf_kafka, and cudf_kafka following the steps above

  • To install the custreamz Python package in editable/develop mode:

cd $CUDF_HOME/python/custreamz
python setup.py build_ext --inplace
python setup.py develop
  • To run custreamz tests :
cd $CUDF_HOME/python
pytest -v custreamz

cudf (Java):

  • First, build the libcudf C++ library following the steps above

  • Then, refer to the Java README

Done! You are ready to develop for the cuDF project. Please review the project's code formatting guidelines.

Debugging cuDF

Building in debug mode from source

Follow the instructions to build from source and add -g to the ./build.sh command.

For example:

./build.sh libcudf -g

This builds libcudf in debug mode which enables some assert safety checks and includes symbols in the library for debugging.

All other steps for installing libcudf into your environment are the same.

Debugging with cuda-gdb and cuda-memcheck

When you have a debug build of libcudf installed, debugging with the cuda-gdb and cuda-memcheck is easy.

If you are debugging a Python script, run the following:

cuda-gdb -ex r --args python <program_name>.py <program_arguments>
cuda-memcheck python <program_name>.py <program_arguments>

Device debug symbols

The device debug symbols are not automatically added with the cmake Debug build type because it causes a runtime delay of several minutes when loading the libcudf.so library.

Therefore, it is recommended to add device debug symbols only to specific files by setting the -G compile option locally in your cpp/CMakeLists.txt for that file. Here is an example of adding the -G option to the compile command for src/copying/copy.cu source file:

set_source_files_properties(src/copying/copy.cu PROPERTIES COMPILE_OPTIONS "-G")

This will add the device debug symbols for this object file in libcudf.so. You can then use cuda-dbg to debug into the kernels in that source file.

Code Formatting

Using pre-commit hooks

cuDF uses pre-commit to execute all code linters and formatters. These tools ensure a consistent code format throughout the project. Using pre-commit ensures that linter versions and options are aligned for all developers. Additionally, there is a CI check in place to enforce that committed code follows our standards.

To use pre-commit, install via conda or pip:

conda install -c conda-forge pre-commit
pip install pre-commit

Then run pre-commit hooks before committing code:

pre-commit run

By default, pre-commit runs on staged files (only changes and additions that will be committed). To run pre-commit checks on all files, execute:

pre-commit run --all-files

Optionally, you may set up the pre-commit hooks to run automatically when you make a git commit. This can be done by running:

pre-commit install

Now code linters and formatters will be run each time you commit changes.

You can skip these checks with git commit --no-verify or with the short version git commit -n.

Summary of pre-commit hooks

The following section describes some of the core pre-commit hooks used by the repository. See .pre-commit-config.yaml for a full list.

C++/CUDA is formatted with clang-format.

doxygen is used as documentation generator and also as a documentation linter. In order to run doxygen as a linter on C++/CUDA code, run

./ci/checks/doxygen.sh

Python code runs several linters including Black, isort, and flake8.

cuDF also uses codespell to find spelling mistakes, and this check is run as a pre-commit hook. To apply the suggested spelling fixes, you can run codespell -i 3 -w . from the repository root directory. This will bring up an interactive prompt to select which spelling fixes to apply.

Developer Guidelines

The C++ Developer Guide includes details on contributing to libcudf C++ code.

The Python Developer Guide includes details on contributing to cuDF Python code.

Attribution

Portions adopted from https://github.com/pytorch/pytorch/blob/master/CONTRIBUTING.md Portions adopted from https://github.com/dask/dask/blob/master/docs/source/develop.rst