From 5f3417569165a8ee57654217f73e0160312f409c Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Tue, 3 Jul 2018 12:56:03 -0400 Subject: [PATCH] drm/bridge: adv7511: Reset registers on hotplug The bridge loses its hw state when the cable is unplugged. If we detect this case in the hpd handler, reset its state. Reported-by: Rob Clark Tested-by: Rob Clark Reviewed-by: Archit Taneja Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 73021b388e12d..dd3ff2f2cdce0 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -429,6 +429,18 @@ static void adv7511_hpd_work(struct work_struct *work) else status = connector_status_disconnected; + /* + * The bridge resets its registers on unplug. So when we get a plug + * event and we're already supposed to be powered, cycle the bridge to + * restore its state. + */ + if (status == connector_status_connected && + adv7511->connector.status == connector_status_disconnected && + adv7511->powered) { + regcache_mark_dirty(adv7511->regmap); + adv7511_power_on(adv7511); + } + if (adv7511->connector.status != status) { adv7511->connector.status = status; if (status == connector_status_disconnected)