Use with Amiga

[Fenx42]

Hello, i am trying to use a ZuluSCSI V6.4 with my Amiga Computer.
I have configured 2 SCSI Devices a 512MB.
This devices show up correctly in the HD Toolbox and i can create Partition.
But when i reboot, after creating this partions i cannot access this devices.

I 've tried to recreate this with WinUAE and used the two Devices via the USB Tool directly.
In the moment when i reboot in the Amiga Emulator, the Util show a SCSI Error in the debug log, an the devices in Windows are gone.

Has the firmware a problem, if the SCSI Devices uses another Filesystem than FAT?

[aperezbios]

@Fenx42 ZuluSCSI V6.4 does not care what filesystem is being used, and has no need to be aware of such information, so no, that's not the problem.

You mentioned a SCSI error in the debug log, but don't state what the error actually says, so let's start there. What does it say? You're going to need to provide sufficient information if we're to figure this out, and unfortunately, you haven't done so at this point. We need hard data.

It would also be helpful to understand more about your specific machine, such as model, SCSI controller type (is it built in, as with the A3000, or a Zorro card? If the latter, which card? Be specific.