diff --git a/docs/ChangeLog/20200530/PR6260.md b/docs/ChangeLog/20200530/PR6260.md
new file mode 100644
index 000000000000..a2a9534ce21d
--- /dev/null
+++ b/docs/ChangeLog/20200530/PR6260.md
@@ -0,0 +1,38 @@
+# Migrating Lily58 to use split_common
+
+[#6260](https://github.com/qmk/qmk_firmware/pull/6260) Modifies the default firmware for Lily58 to use the `split_common` library, instead of including and depending on its own set of libraries for the following functionality:
+- SSD1306 display
+- i2c for OLED
+- Serial Communication
+
+This allows current lily58 firmware to advance with updates to the `split_common` library, which is shared with many other split keyboards.
+
+## To migrate existing Lily58 firmware:
+
+[Changes to `config.h`](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-445ac369c8717dcd6fc6fc3630836fc1):
+- Remove `#define SSD1306OLED` from config.h
+
+
+[Changes to `keymap.c`](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7):
+- Find/Replace each instance of `#ifdef SSD1306OLED` with `#ifdef OLED_DRIVER_ENABLE`
+- The following changes are for compatibility with the OLED driver. If you don't use the OLED driver you may safely delete [this section](https://github.com/qmk/qmk_firmware/blob/e6b9980bd45c186f7360df68c24b6e05a80c10dc/keyboards/lily58/keymaps/default/keymap.c#L144-L190)
+- Alternatively, if you did not change the OLED code from that in `default`, you may find it easier to simply copy the [relevant section](https://github.com/qmk/qmk_firmware/blob/4ac310668501ae6786c711ecc8f01f62ddaa1c0b/keyboards/lily58/keymaps/default/keymap.c#L138-L172). Otherwise, the changes you need to make are as follows (sample change [here](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7R138-R173))
+- [Remove](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7L138-L141) the block
+```c
+#ifdef SSD1306OLED	
+  iota_gfx_init(!has_usb());   // turns on the display	
+#endif
+```
+- Within the block bounded by `#ifdef OLED_DRIVER_ENABLE` and `#endif // OLED_DRIVER_ENABLE`, add the following block to ensure that your two OLEDs are rotated correctly across the left and right sides:
+```c
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+```
+- Remove the functions `matrix_scan_user`, `matrix_update` and `iota_gfx_task_user`
+- Find/Replace `matrix_render_user(struct CharacterMatrix *matrix)` with `iota_gfx_task_user(void)`
+- Find/Replace `is_master` with `is_keyboard_master()`
+- For each instance of `matrix_write_ln(matrix, display_fn())`, rewrite it as `oled_write_ln(read_layer_state(), false);`
+- For each instance of `matrix_write(matrix, read_logo());`, replace with `oled_write(read_logo(), false);`
\ No newline at end of file
diff --git a/keyboards/lily58/config.h b/keyboards/lily58/config.h
index 50bf2beb3254..0bdaa1f76e7e 100644
--- a/keyboards/lily58/config.h
+++ b/keyboards/lily58/config.h
@@ -19,10 +19,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #include "config_common.h"
-#include <serial_config.h>
 
-#define USE_I2C
-#define USE_SERIAL
+#ifndef SOFT_SERIAL_PIN
+#define SOFT_SERIAL_PIN D2
+#define SERIAL_USE_MULTI_TRANSACTION
+#endif
 
 #if !defined(NO_ACTION_MACRO)
     #define NO_ACTION_MACRO
@@ -30,3 +31,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if !defined(NO_ACTION_FUNCTION)
     #define NO_ACTION_FUNCTION
 #endif
+
+#define DIODE_DIRECTION COL2ROW
+
+// Use the lily version to get the Lily58 logo instead of the qmk logo
+#define OLED_FONT_H "lib/glcdfont_lily.c"
diff --git a/keyboards/lily58/i2c.c b/keyboards/lily58/i2c.c
deleted file mode 100755
index 4bee5c639829..000000000000
--- a/keyboards/lily58/i2c.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif
diff --git a/keyboards/lily58/i2c.h b/keyboards/lily58/i2c.h
deleted file mode 100755
index 710662c7abd6..000000000000
--- a/keyboards/lily58/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK  400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/lily58/keymaps/chuan/config.h b/keyboards/lily58/keymaps/chuan/config.h
new file mode 100644
index 000000000000..fa93060db16a
--- /dev/null
+++ b/keyboards/lily58/keymaps/chuan/config.h
@@ -0,0 +1,64 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define USE_MATRIX_I2C
+
+//  #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// #define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+
+/* define tapping term */
+#define TAPPING_TERM 200
+
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define ENCODERS_PAD_A { F4 }
+#define ENCODERS_PAD_B { F5 }
+
+
+ /* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+// Underglow
+/*
+#undef RGBLED_NUM
+#define RGBLED_NUM 14    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_SLEEP
+*/
diff --git a/keyboards/lily58/keymaps/chuan/keymap.c b/keyboards/lily58/keymaps/chuan/keymap.c
new file mode 100644
index 000000000000..da49e67a0eb9
--- /dev/null
+++ b/keyboards/lily58/keymaps/chuan/keymap.c
@@ -0,0 +1,230 @@
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * | ESC  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |  `   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  |  -   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |HYPER |   A  |   S  |   D  |   F  |   G  |-------.    ,-------|   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|   -   |    |    +  |------+------+------+------+------+------|
+ * |LShift|   Z  |   X  |   C  |   V  |   B  |-------|    |-------|   N  |   M  |   ,  |   .  |   /  |RShift|
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   | LCtl | LGUI |LALT  | /Space  /       \Space \  |RAISE |   [  |   ]  |
+ *                   |      |      |      |/ LOWER /         \      \ |   '  |      |      |
+ *                   `----------------------------'           '------''--------------------'
+ */
+
+ [_QWERTY] = LAYOUT(
+  KC_GESC,   KC_1,   KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,   KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,                        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+  ALL_T(KC_GRV), KC_A,   KC_S,    KC_D,    KC_F,    KC_G,                        KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENTER, \
+  KC_LSFT,  KC_Z,   KC_X,    KC_C,    KC_V,    KC_B, KC_MINS,  MEH_T(KC_EQL),  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, \
+                             KC_LCTRL, KC_LGUI, KC_LALT,LT(_LOWER, KC_SPC),        KC_SPC, LT(2,KC_QUOT),   KC_LBRC, KC_RBRC \
+),
+/* LOWER
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |                    |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |   `  |   !  |   @  |   #  |   $  |   %  |-------.    ,-------|   ^  |   &  |   *  |   (  |   )  |   -  |
+ * |------+------+------+------+------+------| cmd spc|   |       |------+------+------+------+------+------|
+ * |      |      |      |ctrl c|      |      |-------|    |-------|      |   -  |   _  |   [  |   ]  |   |  |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   | LAlt | LGUI |LOWER | /Space  /       \Enter \  |RAISE |  {   |  }   |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `----------------------------'           '------''--------------------'
+ */
+[_LOWER] = LAYOUT(
+   KC_GRV, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  _______, _______, _______, _______, _______, _______,                   _______, _______, _______,_______, _______, _______,\
+  _______, _______, _______, C(KC_C), _______, _______, LGUI(KC_SPC), _______, _______, KC_MINS, KC_UNDS , KC_LBRC, KC_RBRC, KC_PIPE, \
+                             _______, _______, _______, _______, _______,  RAISE, KC_LCBR, KC_RCBR\
+),
+/* RAISE
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |-------.    ,-------|      | Left | Down |  Up  |Right |      |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |  F7  |  F8  |  F9  | F10  | F11  | F12  |-------|    |-------|   +  |   -  |   =  |   [  |   ]  |   \  |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   | LAlt | LGUI |LOWER | /Space  /       \Enter \  |RAISE |BackSP| RGUI |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `----------------------------'           '------''--------------------'
+ */
+
+[_RAISE] = LAYOUT(
+  KC_F1,  KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,                       _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_DEL, _______, \
+  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                      KC_6,    LCTL(LSFT(KC_TAB)),KC_UP,LCTL(KC_TAB),    KC_0,    _______, \
+  _______, _______, _______, _______, _______, _______,                     XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT,   KC_RGHT, XXXXXXX, \
+  _______, _______, _______, _______, _______, _______, _______, TG(_ADJUST),KC_PLUS, KC_MUTE ,KC_VOLD  ,KC_VOLU, _______, _______,  \
+                             _______, _______, _______,  _______, _______,  _______, _______, _______ \
+),
+/* ADJUST
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |  7   |   8  |   9  |RGB ON| HUE+ |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |                    |      |  4   |   5  |   6  | MODE | HUE- |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------.    ,-------|      |  1   |   2  |   3  | SAT+ | VAL+ |
+ * |------+------+------+------+------+------|       |    |DEFAULT|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|      |  0   |   0  |   .  | SAT- | VAL- |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   | LAlt | LGUI |LOWER | /Space  /       \Enter \  |RAISE |BackSP| RGUI |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `----------------------------'           '------''--------------------'
+ */
+  [_ADJUST] = LAYOUT(
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX,  KC_7  ,  KC_8  ,  KC_9  , RGB_TOG, RGB_HUI, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX,  KC_4  ,  KC_5  ,  KC_6  , RGB_MOD, RGB_HUD, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX,  KC_1  ,  KC_2  ,  KC_3  , RGB_SAI, RGB_VAI, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG(_ADJUST), XXXXXXX,  KC_0  ,  KC_0  , KC_DOT, RGB_SAD, RGB_VAD,\
+                             _______, _______, _______, _______, _______,  _______,KC_BSPC, _______ \
+  )
+};
+
+int RGB_current_mode;
+
+int counter = 0;
+int lastIndex = 9;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+}
+
+#ifdef OLED_DRIVER_ENABLE
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+const char *read_mode_icon(bool swap);
+const char *read_host_led_state(void);
+void set_timelog(void);
+const char *read_timelog(void);
+
+char encoder_debug[24];
+
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  snprintf(encoder_debug, sizeof(encoder_debug), "%i   %i", counter, lastIndex );
+  if (is_keyboard_master()) {
+    // If you want to change the display of OLED, you need to change here
+    oled_write_ln(read_layer_state(), false);
+    // oled_write_ln(read_keylog(), false);
+    // oled_write_ln(read_keylogs(), false);
+    // oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
+    oled_write_ln(read_host_led_state(), false);
+    oled_write_ln(encoder_debug, false);
+    // oled_write_ln(read_timelog(), false);
+  } else {
+    oled_write(read_logo(), false);
+    // oled_write_ln(encoder_debug, false);
+  }
+}
+#endif //OLED_DRIVER_ENABLE
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    // set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+  }
+  return true;
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    lastIndex = index;
+    if (clockwise) {
+        counter++;
+        tap_code(KC_PGDN);
+    } else {
+        counter--;
+        tap_code(KC_PGUP);
+    }
+}
diff --git a/keyboards/lily58/keymaps/chuan/rules.mk b/keyboards/lily58/keymaps/chuan/rules.mk
new file mode 100644
index 000000000000..3e05cb7d920a
--- /dev/null
+++ b/keyboards/lily58/keymaps/chuan/rules.mk
@@ -0,0 +1,11 @@
+EXTRAKEY_ENABLE = yes
+NKRO_ENABLE = yes
+ENCODER_ENABLE = yes
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/mode_icon_reader.c \
+        ./lib/host_led_state_reader.c \
+        ./lib/timelogger.c \
+        ./lib/keylogger.c \
diff --git a/keyboards/lily58/keymaps/default/config.h b/keyboards/lily58/keymaps/default/config.h
index 58bbdc5e9d05..6b9e52c05ee0 100644
--- a/keyboards/lily58/keymaps/default/config.h
+++ b/keyboards/lily58/keymaps/default/config.h
@@ -28,8 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define SSD1306OLED
-
 #define USE_SERIAL_PD2
 
 #define TAPPING_FORCE_HOLD
@@ -49,4 +47,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14    // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_SLEEP
-*/
\ No newline at end of file
+*/
diff --git a/keyboards/lily58/keymaps/default/keymap.c b/keyboards/lily58/keymaps/default/keymap.c
index f36248e12d33..f0fbaa8b0d2b 100644
--- a/keyboards/lily58/keymaps/default/keymap.c
+++ b/keyboards/lily58/keymaps/default/keymap.c
@@ -8,8 +8,6 @@
   #include "ssd1306.h"
 #endif
 
-
-
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -135,16 +133,18 @@ void matrix_init_user(void) {
     #ifdef RGBLIGHT_ENABLE
       RGB_current_mode = rgblight_config.mode;
     #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
 }
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
+//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk
+#ifdef OLED_DRIVER_ENABLE
 
-// When add source files to SRC in rules.mk, you can use functions.
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+
+// When you add source files to SRC in rules.mk, you can use functions.
 const char *read_layer_state(void);
 const char *read_logo(void);
 void set_keylog(uint16_t keycode, keyrecord_t *record);
@@ -156,42 +156,24 @@ const char *read_keylogs(void);
 // void set_timelog(void);
 // const char *read_timelog(void);
 
-void matrix_scan_user(void) {
-   iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
+void oled_task_user(void) {
+  if (is_keyboard_master()) {
     // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    //matrix_write_ln(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
+    oled_write_ln(read_layer_state(), false);
+    oled_write_ln(read_keylog(), false);
+    oled_write_ln(read_keylogs(), false);
+    //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
+    //oled_write_ln(read_host_led_state(), false);
+    //oled_write_ln(read_timelog(), false);
   } else {
-    matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
+    oled_write(read_logo(), false);
   }
 }
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
+#endif // OLED_DRIVER_ENABLE
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   if (record->event.pressed) {
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
     set_keylog(keycode, record);
 #endif
     // set_timelog();
diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk
index b39305767b82..a5b6303a1e19 100644
--- a/keyboards/lily58/keymaps/default/rules.mk
+++ b/keyboards/lily58/keymaps/default/rules.mk
@@ -15,13 +15,13 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+OLED_DRIVER_ENABLE= yes     # OLED display
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        ./lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
         ./lib/layer_state_reader.c \
         ./lib/logo_reader.c \
         ./lib/keylogger.c \
diff --git a/keyboards/lily58/keymaps/yuchi/keymap.c b/keyboards/lily58/keymaps/yuchi/keymap.c
index 13b6cb1687e8..d258fbcbc044 100644
--- a/keyboards/lily58/keymaps/yuchi/keymap.c
+++ b/keyboards/lily58/keymaps/yuchi/keymap.c
@@ -112,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
  *                   |      |      |      |/       /         \      \ |      |      |      |
  *                   `----------------------------'           '------''--------------------'
- */ 
+ */
   [_ADJUST] = LAYOUT( \
   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
@@ -137,14 +137,16 @@ void matrix_init_user(void) {
     #ifdef RGBLIGHT_ENABLE
       RGB_current_mode = rgblight_config.mode;
     #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
 }
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
+//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk
+#ifdef OLED_DRIVER_ENABLE
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
 
 // When add source files to SRC in rules.mk, you can use functions.
 const char *read_layer_state(void);
@@ -165,35 +167,22 @@ void matrix_scan_user(void) {
 void matrix_render_user(struct CharacterMatrix *matrix) {
   if (is_master) {
     // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    //matrix_write_ln(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
+    oled_write_ln(read_layer_state(), false);
+    oled_write_ln(read_keylog(), false);
+    oled_write_ln(read_keylogs(), false);
+    //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
+    //oled_write_ln(read_host_led_state(), false);
+    //oled_write_ln(read_timelog(), false);
   } else {
-    matrix_write(matrix, read_logo());
+    oled_write(read_logo(), false);
   }
 }
 
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
 #endif//SSD1306OLED
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   if (record->event.pressed) {
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
     set_keylog(keycode, record);
 #endif
     // set_timelog();
@@ -236,4 +225,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         break;
   }
   return true;
-}
\ No newline at end of file
+}
diff --git a/keyboards/lily58/keymaps/yuchi/rules.mk b/keyboards/lily58/keymaps/yuchi/rules.mk
index 922fac6b69fc..0db9ac50fa12 100644
--- a/keyboards/lily58/keymaps/yuchi/rules.mk
+++ b/keyboards/lily58/keymaps/yuchi/rules.mk
@@ -13,15 +13,14 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        ./lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
         ./lib/layer_state_reader.c \
         ./lib/logo_reader.c \
         ./lib/keylogger.c \
diff --git a/keyboards/lily58/lib/glcdfont.c b/keyboards/lily58/lib/glcdfont_lily.c
similarity index 99%
rename from keyboards/lily58/lib/glcdfont.c
rename to keyboards/lily58/lib/glcdfont_lily.c
index 94f026ba971e..0aa69ea8226e 100644
--- a/keyboards/lily58/lib/glcdfont.c
+++ b/keyboards/lily58/lib/glcdfont_lily.c
@@ -1,6 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
+// Modified to show the Lily58 logo instead of the qmk logo
 #include "progmem.h"
 
 // Standard ASCII 5x7 font
diff --git a/keyboards/lily58/lib/host_led_state_reader.c b/keyboards/lily58/lib/host_led_state_reader.c
index 0e22173b1d81..589dd6152ebe 100644
--- a/keyboards/lily58/lib/host_led_state_reader.c
+++ b/keyboards/lily58/lib/host_led_state_reader.c
@@ -1,15 +1,16 @@
 #include <stdio.h>
+#include "led.h"
+#include "host.h"
 #include "lily58.h"
 
 char host_led_state_str[24];
 
 const char *read_host_led_state(void)
 {
-  uint8_t leds = host_keyboard_leds();
   snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
-           (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
-           (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
-           (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- ");
+           (IS_HOST_LED_ON(USB_LED_NUM_LOCK)) ? "on" : "- ",
+           (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) ? "on" : "- ",
+           (IS_HOST_LED_ON(USB_LED_SCROLL_LOCK)) ? "on" : "- ");
 
   return host_led_state_str;
 }
diff --git a/keyboards/lily58/lib/keylogger.c b/keyboards/lily58/lib/keylogger.c
index a1bd476d20b8..2fc3e663ecaa 100644
--- a/keyboards/lily58/lib/keylogger.c
+++ b/keyboards/lily58/lib/keylogger.c
@@ -1,4 +1,5 @@
 #include <stdio.h>
+#include "action.h"
 #include "lily58.h"
 
 char keylog_str[24] = {};
diff --git a/keyboards/lily58/lib/layer_state_reader.c b/keyboards/lily58/lib/layer_state_reader.c
index 48674b0673a2..0e9dd7039bb6 100644
--- a/keyboards/lily58/lib/layer_state_reader.c
+++ b/keyboards/lily58/lib/layer_state_reader.c
@@ -4,10 +4,10 @@
 #include "lily58.h"
 
 #define L_BASE 0
-#define L_LOWER 2
-#define L_RAISE 4
-#define L_ADJUST 8
-#define L_ADJUST_TRI 14
+#define L_LOWER (1 << 1)
+#define L_RAISE (1 << 2)
+#define L_ADJUST (1 << 3)
+#define L_ADJUST_TRI (L_ADJUST | L_RAISE | L_LOWER)
 
 char layer_state_str[24];
 
diff --git a/keyboards/lily58/lib/mode_icon_reader.c b/keyboards/lily58/lib/mode_icon_reader.c
index 2bce4a71b0e1..27c6d92cd044 100644
--- a/keyboards/lily58/lib/mode_icon_reader.c
+++ b/keyboards/lily58/lib/mode_icon_reader.c
@@ -1,4 +1,5 @@
 #include <stdio.h>
+#include <stdbool.h>
 #include "lily58.h"
 
 char mode_icon[24];
diff --git a/keyboards/lily58/lib/timelogger.c b/keyboards/lily58/lib/timelogger.c
index bfbfbe8a2144..b00c13cb0ab2 100644
--- a/keyboards/lily58/lib/timelogger.c
+++ b/keyboards/lily58/lib/timelogger.c
@@ -1,4 +1,5 @@
 #include <stdio.h>
+#include "timer.h"
 #include "lily58.h"
 
 char timelog_str[24] = {};
diff --git a/keyboards/lily58/lily58.c b/keyboards/lily58/lily58.c
index eacd90a82de9..03975057f40f 100644
--- a/keyboards/lily58/lily58.c
+++ b/keyboards/lily58/lily58.c
@@ -1,10 +1,5 @@
 #include "lily58.h"
-#include "ssd1306.h"
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-#ifdef SSD1306OLED
-  return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-#else
   return process_record_user(keycode, record);
-#endif
-}
\ No newline at end of file
+}
diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h
index 4e8e3a7c9cdf..adcf11b52bca 100644
--- a/keyboards/lily58/rev1/config.h
+++ b/keyboards/lily58/rev1/config.h
@@ -36,8 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 
-/* define tapping term */
-#define TAPPING_TERM 100
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
diff --git a/keyboards/lily58/rev1/rules.mk b/keyboards/lily58/rev1/rules.mk
index 6028b5a5b95a..e69de29bb2d1 100644
--- a/keyboards/lily58/rev1/rules.mk
+++ b/keyboards/lily58/rev1/rules.mk
@@ -1,3 +0,0 @@
-SRC += rev1/matrix.c
-SRC += rev1/split_util.c
-SRC += rev1/split_scomm.c
diff --git a/keyboards/lily58/rev1/split_scomm.c b/keyboards/lily58/rev1/split_scomm.c
deleted file mode 100755
index a1fe6ba5b823..000000000000
--- a/keyboards/lily58/rev1/split_scomm.c
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stddef.h>
-#include <split_scomm.h>
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
-  #include <print.h>
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
-    /* master buffer not changed, only recive slave_buffer_change_count */
-    { (uint8_t *)&status_com,
-      0, NULL,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
-    /* master buffer changed need send, and recive slave_buffer_change_count  */
-    { (uint8_t *)&status_com,
-      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define GET_SLAVE_BUFFER 2
-    /* recive serial_slave_buffer */
-    { (uint8_t *)&status1,
-      0, NULL,
-      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
-    }
-};
-
-void serial_master_init(void)
-{
-    soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
-    soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
-    int status, smatstatus;
-    static int need_retry = 0;
-
-    if( s_change_old != s_change_new ) {
-        smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
-        if( smatstatus == TRANSACTION_END ) {
-            s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
-            uprintf("slave matrix = %b %b %b %b\n",
-                    serial_slave_buffer[0], serial_slave_buffer[1],
-                    serial_slave_buffer[2], serial_slave_buffer[3]);
-#endif
-        }
-    } else {
-        // serial_slave_buffer dosen't change
-        smatstatus = TRANSACTION_END; // dummy status
-    }
-
-    if( !master_update && !need_retry) {
-        status = soft_serial_transaction(GET_SLAVE_STATUS);
-    } else {
-        status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
-    }
-    if( status == TRANSACTION_END ) {
-        s_change_new = slave_buffer_change_count;
-        need_retry = 0;
-    } else {
-        need_retry = 1;
-    }
-    return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/lily58/rev1/split_scomm.h b/keyboards/lily58/rev1/split_scomm.h
deleted file mode 100755
index 873d8939d81f..000000000000
--- a/keyboards/lily58/rev1/split_scomm.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef SPLIT_COMM_H
-#define SPLIT_COMM_H
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
-
-#endif /* SPLIT_COMM_H */
diff --git a/keyboards/lily58/rev1/split_util.h b/keyboards/lily58/rev1/split_util.h
deleted file mode 100755
index 687ca19bd3e5..000000000000
--- a/keyboards/lily58/rev1/split_util.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef SPLIT_KEYBOARD_UTIL_H
-#define SPLIT_KEYBOARD_UTIL_H
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS           0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-void matrix_master_OLED_init (void);
-
-#endif
diff --git a/keyboards/lily58/rules.mk b/keyboards/lily58/rules.mk
index d413510bac1f..34b512d59a6c 100644
--- a/keyboards/lily58/rules.mk
+++ b/keyboards/lily58/rules.mk
@@ -29,19 +29,7 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-CUSTOM_MATRIX = yes
-
-SRC += i2c.c
-SRC += serial.c
-SRC += ssd1306.c
-
-# A workaround until #7089 is merged.
-#   serial.c must not be compiled with the -lto option.
-#   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
-LIB_SRC += serial.c
-
-# if firmware size over limit, try this option
-# CFLAGS += -flto
+OLED_DRIVER_ENABLE = yes    # OLED display
+SPLIT_KEYBOARD = yes
 
 DEFAULT_FOLDER = lily58/rev1
diff --git a/keyboards/lily58/serial.h b/keyboards/lily58/serial.h
deleted file mode 100755
index 7e0c0847a431..000000000000
--- a/keyboards/lily58/serial.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef SOFT_SERIAL_H
-#define SOFT_SERIAL_H
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
-//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-//                                               //  1: about 137kbps (default)
-//                                               //  2: about 75kbps
-//                                               //  3: about 39kbps
-//                                               //  4: about 26kbps
-//                                               //  5: about 20kbps
-//
-// //// USE Simple API (OLD API, compatible with let's split serial.c)
-// ex.
-//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-//  #define SERIAL_MASTER_BUFFER_LENGTH 1
-//
-// //// USE flexible API (using multi-type transaction function)
-//  #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
-#if SERIAL_SLAVE_BUFFER_LENGTH > 0
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-#endif
-#if SERIAL_MASTER_BUFFER_LENGTH > 0
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-#endif
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-
-#endif // USE Simple API
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t  {
-    uint8_t *status;
-    uint8_t initiator2target_buffer_size;
-    uint8_t *initiator2target_buffer;
-    uint8_t target2initiator_buffer_size;
-    uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR  0x2
-#define TRANSACTION_TYPE_ERROR  0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_transaction(void);
-#else
-int  soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-//   initiator:
-//       TRANSACTION_END
-//    or TRANSACTION_NO_RESPONSE
-//    or TRANSACTION_DATA_ERROR
-//   target:
-//       TRANSACTION_DATA_ERROR
-//    or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_get_and_clean_status(int sstd_index);
-#endif
-
-#endif /* SOFT_SERIAL_H */
diff --git a/keyboards/lily58/serial_config.h b/keyboards/lily58/serial_config.h
deleted file mode 100644
index 4fab8e8ddfcf..000000000000
--- a/keyboards/lily58/serial_config.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef SOFT_SERIAL_PIN
-#define SOFT_SERIAL_PIN D2
-#define SERIAL_USE_MULTI_TRANSACTION
-#endif
diff --git a/keyboards/lily58/ssd1306.c b/keyboards/lily58/ssd1306.c
deleted file mode 100755
index 20c2738db774..000000000000
--- a/keyboards/lily58/ssd1306.c
+++ /dev/null
@@ -1,344 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
-
-extern const unsigned char font[] PROGMEM;
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-
-// 'last_flush' is declared as uint16_t,
-// so this must be less than 65535 
-#define ScreenOffInterval 60000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-static bool force_dirty = true;
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(bool rotate) {
-  bool success = false;
-
-  i2c_master_init();
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-  if(rotate){
-    // the following Flip the display orientation 180 degrees
-    send_cmd1(SegRemap);
-    send_cmd1(ComScanInc);
-  }else{
-    // Flips the display orientation 0 degrees
-    send_cmd1(SegRemap | 0x1);
-    send_cmd1(ComScanDec);
-  }
-
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-}
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
-  char data_ln[strlen(data)+2];
-  snprintf(data_ln, sizeof(data_ln), "%s\n", data);
-  matrix_write(matrix, data_ln);
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      //i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
-
-void iota_gfx_task(void) {
-  iota_gfx_task_user();
-
-  if (display.dirty|| force_dirty) {
-    iota_gfx_flush();
-    force_dirty = false;
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
-  force_dirty = true;
-  return true;
-}
-
-#endif
diff --git a/keyboards/lily58/ssd1306.h b/keyboards/lily58/ssd1306.h
deleted file mode 100755
index ea8c9232805d..000000000000
--- a/keyboards/lily58/ssd1306.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdio.h>
-#include "pincontrol.h"
-#include "action.h"
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
-#endif
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-struct CharacterMatrix display;
-
-bool iota_gfx_init(bool rotate);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-void iota_gfx_task_user(void);
-
-void matrix_clear(struct CharacterMatrix *matrix);
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
-void matrix_render(struct CharacterMatrix *matrix);
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
\ No newline at end of file
diff --git a/users/ninjonas/ninjonas.c b/users/ninjonas/ninjonas.c
index 7e5afcec87ef..d66a5b008ce3 100644
--- a/users/ninjonas/ninjonas.c
+++ b/users/ninjonas/ninjonas.c
@@ -36,4 +36,4 @@ void keyboard_post_init_user() {
      }
   #endif
   layer_state_set_user(layer_state);
-}
\ No newline at end of file
+}