Infer LED DRIVER_COUNT from configured addresses

docs/feature_led_matrix.md

@@ -21,7 +21,6 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
 |----------|-------------|---------|
 | `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `IS31FL3731_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
 | `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
 | `IS31FL3731_I2C_ADDRESS_1` | (Required) Address for the first LED driver | |
 | `IS31FL3731_I2C_ADDRESS_2` | (Optional) Address for the second LED driver | |
@@ -43,7 +42,6 @@ Here is an example using 2 drivers.
 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
 #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
 
-#define IS31FL3731_DRIVER_COUNT 2
 #define LED_DRIVER_1_LED_TOTAL 25
 #define LED_DRIVER_2_LED_TOTAL 24
 #define LED_MATRIX_LED_COUNT (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)
@@ -96,7 +94,6 @@ Configure the hardware via your `config.h`:
 |----------|-------------|---------|
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
 | `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Optional) Address for the first LED driver | |
 | `DRIVER_ADDR_<N>` | (Required) Address for the additional LED drivers | |
@@ -129,7 +126,6 @@ Here is an example using 2 drivers.
 ```c
 #define DRIVER_ADDR_2 0b0100001
 
-#define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 42
 #define LED_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

docs/feature_rgb_matrix.md

@@ -22,7 +22,6 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` de
 | `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `IS31FL3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
-| `IS31FL3731_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `IS31FL3731_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | |
 | `IS31FL3731_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | |
@@ -44,7 +43,6 @@ Here is an example using 2 drivers.
 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
 #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
 
-#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -91,7 +89,6 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
 | `IS31FL3733_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
 | `IS31FL3733_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `IS31FL3733_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `IS31FL3733_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `IS31FL3733_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | |
 | `IS31FL3733_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | |
@@ -130,7 +127,6 @@ Here is an example using 2 drivers.
 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
 #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_VCC
 
-#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 58
 #define DRIVER_2_LED_TOTAL 10
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -178,7 +174,6 @@ Configure the hardware via your `config.h`:
 | `IS31FL3736_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
 | `IS31FL3736_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `IS31FL3736_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `IS31FL3736_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `IS31FL3736_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | |
 | `IS31FL3736_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | |
@@ -214,7 +209,6 @@ Here is an example using 2 drivers.
 #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND
 #define IS31FL3736_I2C_ADDRESS_2 IS31FL3736_I2C_ADDRESS_GND_SCL
 
-#define IS31FL3736_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 #define DRIVER_2_LED_TOTAL 32
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -255,7 +249,6 @@ Configure the hardware via your `config.h`:
 | `IS31FL3737_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
 | `IS31FL3737_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
 | `IS31FL3737_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `IS31FL3737_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `IS31FL3737_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | |
 | `IS31FL3737_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | |
@@ -290,7 +283,6 @@ Here is an example using 2 drivers.
 #define IS31FL3737_I2C_ADDRESS_1 IS31FL3737_I2C_ADDRESS_GND
 #define IS31FL3737_I2C_ADDRESS_2 IS31FL3737_I2C_ADDRESS_SCL
 
-#define IS31FL3737_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -341,7 +333,6 @@ Configure the hardware via your `config.h`:
 |----------|-------------|---------|
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Optional) Address for the first RGB driver | |
 | `DRIVER_ADDR_<N>` | (Required) Address for the additional RGB drivers | |
@@ -376,7 +367,6 @@ Here is an example using 2 drivers.
 ```c
 #define DRIVER_ADDR_2 0b0100001
 
-#define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 42
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -486,7 +476,6 @@ You can use up to 2 AW20216S IC's. Do not specify `DRIVER_<N>_xxx` defines for I
 | `AW20216S_EN_PIN_2` | (Optional) MCU pin connected to second RGB driver hardware enable line  | |
 | `DRIVER_1_LED_TOTAL` | (Required) How many RGB lights are connected to first RGB driver  | |
 | `DRIVER_2_LED_TOTAL` | (Optional) How many RGB lights are connected to second RGB driver  | |
-| `AW20216S_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `AW20216S_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 |
 | `AW20216S_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 |
@@ -502,7 +491,6 @@ Here is an example using 2 drivers.
 #define AW20216S_EN_PIN_1 C13
 #define AW20216S_EN_PIN_2 C13
 
-#define AW20216S_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 66
 #define DRIVER_2_LED_TOTAL 32
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

drivers/led/aw20216s.h

@@ -22,9 +22,6 @@
 #include "gpio.h"
 
 // ======== DEPRECATED DEFINES - DO NOT USE ========
-#ifdef DRIVER_COUNT
-#    define AW20216S_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef AW_SCALING_MAX
 #    define AW20216S_SCALING_MAX AW_SCALING_MAX
 #endif
@@ -58,6 +55,12 @@
 #    define AW20216S_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+#if defined(AW20216S_CS_PIN_2)
+#    define AW20216S_DRIVER_COUNT 2
+#elif defined(AW20216S_CS_PIN_1)
+#    define AW20216S_DRIVER_COUNT 1
+#endif
+
 typedef struct aw20216s_led_t {
     uint8_t driver : 2;
     uint8_t r;

drivers/led/issi/is31fl3731-simple.h

@@ -35,9 +35,6 @@
 #ifdef LED_DRIVER_ADDR_4
 #    define IS31FL3731_I2C_ADDRESS_4 LED_DRIVER_ADDR_4
 #endif
-#ifdef LED_DRIVER_COUNT
-#    define IS31FL3731_DRIVER_COUNT LED_DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -61,6 +58,16 @@
 #    define IS31FL3731_LED_COUNT LED_MATRIX_LED_COUNT
 #endif
 
+#if defined IS31FL3731_I2C_ADDRESS_4
+#    define IS31FL3731_DRIVER_COUNT 4
+#elif defined IS31FL3731_I2C_ADDRESS_3
+#    define IS31FL3731_DRIVER_COUNT 3
+#elif defined IS31FL3731_I2C_ADDRESS_2
+#    define IS31FL3731_DRIVER_COUNT 2
+#elif defined IS31FL3731_I2C_ADDRESS_1
+#    define IS31FL3731_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3731_led_t {
     uint8_t driver : 2;
     uint8_t v;

drivers/led/issi/is31fl3731.h

@@ -34,9 +34,6 @@
 #ifdef DRIVER_ADDR_4
 #    define IS31FL3731_I2C_ADDRESS_4 DRIVER_ADDR_4
 #endif
-#ifdef DRIVER_COUNT
-#    define IS31FL3731_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -60,6 +57,16 @@
 #    define IS31FL3731_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3731_I2C_ADDRESS_4)
+#    define IS31FL3731_DRIVER_COUNT 4
+#elif defined(IS31FL3731_I2C_ADDRESS_3)
+#    define IS31FL3731_DRIVER_COUNT 3
+#elif defined(IS31FL3731_I2C_ADDRESS_2)
+#    define IS31FL3731_DRIVER_COUNT 2
+#elif defined(IS31FL3731_I2C_ADDRESS_1)
+#    define IS31FL3731_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3731_led_t {
     uint8_t driver : 2;
     uint8_t r;

drivers/led/issi/is31fl3733-simple.h

@@ -25,9 +25,6 @@
 #include "progmem.h"
 
 // ======== DEPRECATED DEFINES - DO NOT USE ========
-#ifdef LED_DRIVER_COUNT
-#    define IS31FL3733_DRIVER_COUNT LED_DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -80,6 +77,16 @@
 #    define IS31FL3733_LED_COUNT LED_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3733_I2C_ADDRESS_4)
+#    define IS31FL3733_DRIVER_COUNT 4
+#elif defined(IS31FL3733_I2C_ADDRESS_3)
+#    define IS31FL3733_DRIVER_COUNT 3
+#elif defined(IS31FL3733_I2C_ADDRESS_2)
+#    define IS31FL3733_DRIVER_COUNT 2
+#elif defined(IS31FL3733_I2C_ADDRESS_1)
+#    define IS31FL3733_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3733_led_t {
     uint8_t driver : 2;
     uint8_t v;

drivers/led/issi/is31fl3733.h

@@ -48,9 +48,6 @@
 #ifdef DRIVER_ADDR_4
 #    define IS31FL3733_SYNC_4 DRIVER_SYNC_4
 #endif
-#ifdef DRIVER_COUNT
-#    define IS31FL3733_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -103,6 +100,16 @@
 #    define IS31FL3733_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3733_I2C_ADDRESS_4)
+#    define IS31FL3733_DRIVER_COUNT 4
+#elif defined(IS31FL3733_I2C_ADDRESS_3)
+#    define IS31FL3733_DRIVER_COUNT 3
+#elif defined(IS31FL3733_I2C_ADDRESS_2)
+#    define IS31FL3733_DRIVER_COUNT 2
+#elif defined(IS31FL3733_I2C_ADDRESS_1)
+#    define IS31FL3733_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3733_led_t {
     uint8_t driver : 2;
     uint8_t r;

drivers/led/issi/is31fl3736-simple.h

@@ -22,9 +22,6 @@
 #include "progmem.h"
 
 // ======== DEPRECATED DEFINES - DO NOT USE ========
-#ifdef DRIVER_COUNT
-#    define IS31FL3736_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3736_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -75,6 +72,16 @@
 #    define IS31FL3736_LED_COUNT LED_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3736_I2C_ADDRESS_4)
+#    define IS31FL3736_DRIVER_COUNT 4
+#elif defined(IS31FL3736_I2C_ADDRESS_3)
+#    define IS31FL3736_DRIVER_COUNT 3
+#elif defined(IS31FL3736_I2C_ADDRESS_2)
+#    define IS31FL3736_DRIVER_COUNT 2
+#elif defined(IS31FL3736_I2C_ADDRESS_1)
+#    define IS31FL3736_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3736_led_t {
     uint8_t driver : 2;
     uint8_t v;

drivers/led/issi/is31fl3736.h

@@ -34,9 +34,6 @@
 #ifdef DRIVER_ADDR_4
 #    define IS31FL3736_I2C_ADDRESS_4 DRIVER_ADDR_4
 #endif
-#ifdef DRIVER_COUNT
-#    define IS31FL3736_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3736_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -87,6 +84,16 @@
 #    define IS31FL3736_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3736_I2C_ADDRESS_4)
+#    define IS31FL3736_DRIVER_COUNT 4
+#elif defined(IS31FL3736_I2C_ADDRESS_3)
+#    define IS31FL3736_DRIVER_COUNT 3
+#elif defined(IS31FL3736_I2C_ADDRESS_2)
+#    define IS31FL3736_DRIVER_COUNT 2
+#elif defined(IS31FL3736_I2C_ADDRESS_1)
+#    define IS31FL3736_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3736_led_t {
     uint8_t driver : 2;
     uint8_t r;

drivers/led/issi/is31fl3737-simple.h

@@ -24,9 +24,6 @@
 #include "progmem.h"
 
 // ======== DEPRECATED DEFINES - DO NOT USE ========
-#ifdef DRIVER_COUNT
-#    define IS31FL3737_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3737_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -65,6 +62,16 @@
 #    define IS31FL3737_LED_COUNT LED_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3737_I2C_ADDRESS_4)
+#    define IS31FL3737_DRIVER_COUNT 4
+#elif defined(IS31FL3737_I2C_ADDRESS_3)
+#    define IS31FL3737_DRIVER_COUNT 3
+#elif defined(IS31FL3737_I2C_ADDRESS_2)
+#    define IS31FL3737_DRIVER_COUNT 2
+#elif defined(IS31FL3737_I2C_ADDRESS_1)
+#    define IS31FL3737_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3737_led_t {
     uint8_t driver : 2;
     uint8_t v;

drivers/led/issi/is31fl3737.h

@@ -36,9 +36,6 @@
 #ifdef DRIVER_ADDR_4
 #    define IS31FL3737_I2C_ADDRESS_4 DRIVER_ADDR_4
 #endif
-#ifdef DRIVER_COUNT
-#    define IS31FL3737_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3737_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -80,6 +77,16 @@
 #    define IS31FL3737_LED_COUNT RGB_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3737_I2C_ADDRESS_4)
+#    define IS31FL3737_DRIVER_COUNT 4
+#elif defined(IS31FL3737_I2C_ADDRESS_3)
+#    define IS31FL3737_DRIVER_COUNT 3
+#elif defined(IS31FL3737_I2C_ADDRESS_2)
+#    define IS31FL3737_DRIVER_COUNT 2
+#elif defined(IS31FL3737_I2C_ADDRESS_1)
+#    define IS31FL3737_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3737_led_t {
     uint8_t driver : 2;
     uint8_t r;

drivers/led/issi/is31fl3741-simple.h

@@ -24,9 +24,6 @@
 #include "progmem.h"
 
 // ======== DEPRECATED DEFINES - DO NOT USE ========
-#ifdef DRIVER_COUNT
-#    define IS31FL3741_DRIVER_COUNT DRIVER_COUNT
-#endif
 #ifdef ISSI_TIMEOUT
 #    define IS31FL3741_I2C_TIMEOUT ISSI_TIMEOUT
 #endif
@@ -65,6 +62,16 @@
 #    define IS31FL3741_LED_COUNT LED_MATRIX_LED_COUNT
 #endif
 
+#if defined(IS31FL3741_I2C_ADDRESS_4)
+#    define IS31FL3741_DRIVER_COUNT 4
+#elif defined(IS31FL3741_I2C_ADDRESS_3)
+#    define IS31FL3741_DRIVER_COUNT 3
+#elif defined(IS31FL3741_I2C_ADDRESS_2)
+#    define IS31FL3741_DRIVER_COUNT 2
+#elif defined(IS31FL3741_I2C_ADDRESS_1)
+#    define IS31FL3741_DRIVER_COUNT 1
+#endif
+
 typedef struct is31fl3741_led_t {
     uint32_t driver : 2;
     uint32_t v : 10;