diff --git a/keyboards/0xc7/61key/config.h b/keyboards/0xc7/61key/config.h
index bf8c5a3bd25e..96f7e02bda25 100644
--- a/keyboards/0xc7/61key/config.h
+++ b/keyboards/0xc7/61key/config.h
@@ -44,32 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== choose animations ==*/
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/25keys/aleth42/rev0/config.h b/keyboards/25keys/aleth42/rev0/config.h
index 8b3236750faf..fd2fda01a0ae 100644
--- a/keyboards/25keys/aleth42/rev0/config.h
+++ b/keyboards/25keys/aleth42/rev0/config.h
@@ -50,13 +50,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/25keys/aleth42/rev1/config.h b/keyboards/25keys/aleth42/rev1/config.h
index 56a87922019d..7b4ab267e859 100644
--- a/keyboards/25keys/aleth42/rev1/config.h
+++ b/keyboards/25keys/aleth42/rev1/config.h
@@ -54,12 +54,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/40percentclub/25/config.h b/keyboards/40percentclub/25/config.h
index 90daf8350154..2436d0520bfe 100644
--- a/keyboards/40percentclub/25/config.h
+++ b/keyboards/40percentclub/25/config.h
@@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/4pack/config.h b/keyboards/40percentclub/4pack/config.h
index d289f893ece4..2fc00cdc8926 100644
--- a/keyboards/40percentclub/4pack/config.h
+++ b/keyboards/40percentclub/4pack/config.h
@@ -21,23 +21,6 @@ along with this program. If not, see .
#undef BACKLIGHT_PIN
#define BACKLIGHT_PINS { F6, F7 }
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/5x5/config.h b/keyboards/40percentclub/5x5/config.h
index 8ce12c25facb..fb6aaece2586 100644
--- a/keyboards/40percentclub/5x5/config.h
+++ b/keyboards/40percentclub/5x5/config.h
@@ -23,14 +23,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/6lit/config.h b/keyboards/40percentclub/6lit/config.h
index 19aea3287d94..a3d41ba0cf91 100644
--- a/keyboards/40percentclub/6lit/config.h
+++ b/keyboards/40percentclub/6lit/config.h
@@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/foobar/config.h b/keyboards/40percentclub/foobar/config.h
index 04fe3de42363..746b1a826534 100644
--- a/keyboards/40percentclub/foobar/config.h
+++ b/keyboards/40percentclub/foobar/config.h
@@ -46,14 +46,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h
index dab18c1e1edd..440eb2522169 100644
--- a/keyboards/40percentclub/half_n_half/config.h
+++ b/keyboards/40percentclub/half_n_half/config.h
@@ -43,16 +43,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h
index bae621fcac55..4ea491396522 100644
--- a/keyboards/40percentclub/mf68/config.h
+++ b/keyboards/40percentclub/mf68/config.h
@@ -42,16 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h
index e89243f55e9e..c30966d9d2f2 100644
--- a/keyboards/40percentclub/nein/config.h
+++ b/keyboards/40percentclub/nein/config.h
@@ -16,22 +16,6 @@
#pragma once
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/40percentclub/sixpack/config.h b/keyboards/40percentclub/sixpack/config.h
index c94721d714af..079afe435d6d 100644
--- a/keyboards/40percentclub/sixpack/config.h
+++ b/keyboards/40percentclub/sixpack/config.h
@@ -26,19 +26,3 @@ along with this program. If not, see .
#define LED_PIN_ON_STATE 0
#define LED_CAPS_LOCK_PIN B0 // RX Led
#define LED_NUM_LOCK_PIN D5 // TX Led
-
-// #define RGB_DI_PIN B1 // PB1 on expansion connector
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
diff --git a/keyboards/abacus/config.h b/keyboards/abacus/config.h
index f4b34f89aa49..44d1e97e9a5e 100644
--- a/keyboards/abacus/config.h
+++ b/keyboards/abacus/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/acheron/elongate/beta/config.h b/keyboards/acheron/elongate/beta/config.h
index c4425e6e8583..619868ac08dc 100644
--- a/keyboards/acheron/elongate/beta/config.h
+++ b/keyboards/acheron/elongate/beta/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/acheron/shark/alpha/config.h b/keyboards/acheron/shark/alpha/config.h
index e45d721a0172..139b21b0b9c2 100644
--- a/keyboards/acheron/shark/alpha/config.h
+++ b/keyboards/acheron/shark/alpha/config.h
@@ -52,22 +52,6 @@ B0, which is unconnected on the PCB
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/adelheid/config.h b/keyboards/adelheid/config.h
index 2f12ceb54af4..3fcb74af8e2a 100644
--- a/keyboards/adelheid/config.h
+++ b/keyboards/adelheid/config.h
@@ -41,16 +41,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN C6
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h
index e395da3dd476..08edaacb6221 100644
--- a/keyboards/adkb96/rev1/config.h
+++ b/keyboards/adkb96/rev1/config.h
@@ -37,12 +37,6 @@ along with this program. If not, see .
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* ws2812 RGB LED */
-/*
-#define RGB_DI_PIN D3
-
-#define RGBLED_NUM 12 // Number of LEDs
-*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h
index f8b0bc537a89..887136665962 100644
--- a/keyboards/adpenrose/kintsugi/config.h
+++ b/keyboards/adpenrose/kintsugi/config.h
@@ -64,10 +64,4 @@ increase the value. If you need 2 clicks for 1 keycode, decrease*/
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h
index 7f8e62734acf..96b609fb5981 100644
--- a/keyboards/adpenrose/obi/config.h
+++ b/keyboards/adpenrose/obi/config.h
@@ -50,10 +50,4 @@ increase the value. If you need 2 clicks for 1 keycode, decrease*/
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h
index 681367649342..4b76bf8b2641 100644
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@@ -42,16 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
-//#define RGB_DI_PIN C4
-//#ifdef RGB_DI_PIN
-// #define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 230 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h
index 310ed6e76043..b0634a610e39 100644
--- a/keyboards/ai03/lunar/config.h
+++ b/keyboards/ai03/lunar/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 2b1c8cc8cc87..3d96f09c7935 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -54,16 +54,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h
index 181f5e38c9f2..06c2be69c302 100644
--- a/keyboards/ai03/polaris/config.h
+++ b/keyboards/ai03/polaris/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h
index 05341a266310..f80ecd9863e7 100644
--- a/keyboards/ai03/quasar/config.h
+++ b/keyboards/ai03/quasar/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h
index e77222a3b4cd..71ab43c8bb6d 100644
--- a/keyboards/ai03/soyuz/config.h
+++ b/keyboards/ai03/soyuz/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/amjkeyboard/amj60/config.h b/keyboards/amjkeyboard/amj60/config.h
index 2e4ad89bde78..fbc330f67b7f 100644
--- a/keyboards/amjkeyboard/amj60/config.h
+++ b/keyboards/amjkeyboard/amj60/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/amjkeyboard/amj96/config.h b/keyboards/amjkeyboard/amj96/config.h
index a8a47f26b891..8511574b047e 100644
--- a/keyboards/amjkeyboard/amj96/config.h
+++ b/keyboards/amjkeyboard/amj96/config.h
@@ -54,12 +54,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/aplyard/aplx6/rev1/config.h b/keyboards/aplyard/aplx6/rev1/config.h
index 46e7d3668f9f..8a32a8ae37dc 100644
--- a/keyboards/aplyard/aplx6/rev1/config.h
+++ b/keyboards/aplyard/aplx6/rev1/config.h
@@ -26,12 +26,5 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { E6, B3 }
#define MATRIX_COL_PINS { F7, B6, F4 }
-
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN X
-
-//#define RGBLED_NUM X // Number of LEDs
-
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/arisu/config.h b/keyboards/arisu/config.h
index b9a62895855c..6ad74f302a04 100644
--- a/keyboards/arisu/config.h
+++ b/keyboards/arisu/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ash1800/config.h b/keyboards/ash1800/config.h
index 74d751b29477..3591967a8f4a 100644
--- a/keyboards/ash1800/config.h
+++ b/keyboards/ash1800/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ask55/config.h b/keyboards/ask55/config.h
index d7246e418009..f16fa8823e26 100644
--- a/keyboards/ask55/config.h
+++ b/keyboards/ask55/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atlas_65/config.h b/keyboards/atlas_65/config.h
index 7fc6dfaad538..5d7baee94482 100644
--- a/keyboards/atlas_65/config.h
+++ b/keyboards/atlas_65/config.h
@@ -37,16 +37,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atxkb/1894/config.h b/keyboards/atxkb/1894/config.h
index a8173c80fd93..5bf2ebdf0526 100644
--- a/keyboards/atxkb/1894/config.h
+++ b/keyboards/atxkb/1894/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/aves60/config.h b/keyboards/aves60/config.h
index 02898f292e63..cff93a705f14 100644
--- a/keyboards/aves60/config.h
+++ b/keyboards/aves60/config.h
@@ -49,12 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/baguette/config.h b/keyboards/baguette/config.h
index fd31c575d41d..39ff536e22ad 100644
--- a/keyboards/baguette/config.h
+++ b/keyboards/baguette/config.h
@@ -42,14 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h
index ef430d4f3ca0..c0653f1a77de 100644
--- a/keyboards/bandominedoni/config.h
+++ b/keyboards/bandominedoni/config.h
@@ -56,20 +56,6 @@
//#define LED_KANA_PIN B4
#define RGB_DI_PIN D3
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/biacco42/meishi2/config.h b/keyboards/biacco42/meishi2/config.h
index da09d95dcd9b..dea286dade13 100644
--- a/keyboards/biacco42/meishi2/config.h
+++ b/keyboards/biacco42/meishi2/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/blank/blank01/config.h b/keyboards/blank/blank01/config.h
index e4690800538d..d05d85bb3e84 100644
--- a/keyboards/blank/blank01/config.h
+++ b/keyboards/blank/blank01/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/bthlabs/geekpad/config.h b/keyboards/bthlabs/geekpad/config.h
index 52f4fb38449a..fe1147990313 100644
--- a/keyboards/bthlabs/geekpad/config.h
+++ b/keyboards/bthlabs/geekpad/config.h
@@ -38,14 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/cannonkeys/adelie/config.h b/keyboards/cannonkeys/adelie/config.h
index 127206d17c86..49a86f826503 100644
--- a/keyboards/cannonkeys/adelie/config.h
+++ b/keyboards/cannonkeys/adelie/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/capsunlocked/cu80/v1/config.h b/keyboards/capsunlocked/cu80/v1/config.h
index 1a8acf661852..48f22e1bb432 100644
--- a/keyboards/capsunlocked/cu80/v1/config.h
+++ b/keyboards/capsunlocked/cu80/v1/config.h
@@ -31,23 +31,3 @@ along with this program. If not, see .
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-
-//#define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLED_NUM 88
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-#define RGBLIGHT_LIMIT_VAL 50
-#endif
diff --git a/keyboards/chromatonemini/config.h b/keyboards/chromatonemini/config.h
index 7071d54862ab..77a7d9fa9980 100644
--- a/keyboards/chromatonemini/config.h
+++ b/keyboards/chromatonemini/config.h
@@ -25,21 +25,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/ckeys/washington/config.h b/keyboards/ckeys/washington/config.h
index 11856ba01072..7e85ac2544ef 100644
--- a/keyboards/ckeys/washington/config.h
+++ b/keyboards/ckeys/washington/config.h
@@ -43,22 +43,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cool836a/config.h b/keyboards/cool836a/config.h
index c09ad20a3d52..591133c96bb2 100644
--- a/keyboards/cool836a/config.h
+++ b/keyboards/cool836a/config.h
@@ -45,22 +45,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/copenhagen_click/click_pad_v1/config.h b/keyboards/copenhagen_click/click_pad_v1/config.h
index 459eec003ad7..8e63cfbb4358 100755
--- a/keyboards/copenhagen_click/click_pad_v1/config.h
+++ b/keyboards/copenhagen_click/click_pad_v1/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h
index 3c8b981385bb..8bc141beefe8 100644
--- a/keyboards/coseyfannitutti/discipad/config.h
+++ b/keyboards/coseyfannitutti/discipad/config.h
@@ -42,16 +42,6 @@ along with this program. If not, see .
#define USB_MAX_POWER_CONSUMPTION 100
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h
index 2d3aa84e8f67..101f8808b70e 100644
--- a/keyboards/coseyfannitutti/discipline/config.h
+++ b/keyboards/coseyfannitutti/discipline/config.h
@@ -40,16 +40,6 @@ along with this program. If not, see .
#define USB_MAX_POWER_CONSUMPTION 100
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h
index 27e797ea141e..81feea77616b 100644
--- a/keyboards/coseyfannitutti/mulletpad/config.h
+++ b/keyboards/coseyfannitutti/mulletpad/config.h
@@ -38,15 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN D5
-//#ifdef RGB_DI_PIN
-//#define RGBLED_NUM 8
-//#define RGBLIGHT_HUE_STEP 8
-//#define RGBLIGHT_SAT_STEP 8
-//#define RGBLIGHT_VAL_STEP 8
-//#define RGBLIGHT_SLEEP
-//#endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/coseyfannitutti/mysterium/config.h b/keyboards/coseyfannitutti/mysterium/config.h
index 6fde70121999..cd01b54cce6a 100644
--- a/keyboards/coseyfannitutti/mysterium/config.h
+++ b/keyboards/coseyfannitutti/mysterium/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/coseyfannitutti/romeo/config.h b/keyboards/coseyfannitutti/romeo/config.h
index ef99a55ac5ad..477fe034a543 100644
--- a/keyboards/coseyfannitutti/romeo/config.h
+++ b/keyboards/coseyfannitutti/romeo/config.h
@@ -41,16 +41,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/cozykeys/bloomer/config.h b/keyboards/cozykeys/bloomer/config.h
index 8ed7fbaba4f4..8bfe27b5e160 100644
--- a/keyboards/cozykeys/bloomer/config.h
+++ b/keyboards/cozykeys/bloomer/config.h
@@ -40,9 +40,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_BREATHE_TABLE_SIZE 256
-#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85
-#define RGBLIGHT_EFFECT_BREATHE_MAX 255
#endif
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
diff --git a/keyboards/cozykeys/speedo/v3/config.h b/keyboards/cozykeys/speedo/v3/config.h
index 260c23ea117c..6cd36ba916c2 100644
--- a/keyboards/cozykeys/speedo/v3/config.h
+++ b/keyboards/cozykeys/speedo/v3/config.h
@@ -44,9 +44,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_BREATHE_TABLE_SIZE 256
-#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85
-#define RGBLIGHT_EFFECT_BREATHE_MAX 255
#endif
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
diff --git a/keyboards/craftwalk/config.h b/keyboards/craftwalk/config.h
index 3c09f35d32c4..ee6771d1a45a 100644
--- a/keyboards/craftwalk/config.h
+++ b/keyboards/craftwalk/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/crazy_keyboard_68/config.h b/keyboards/crazy_keyboard_68/config.h
index b0830ce234ef..928b1db1cc15 100644
--- a/keyboards/crazy_keyboard_68/config.h
+++ b/keyboards/crazy_keyboard_68/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/cutie_club/wraith/config.h b/keyboards/cutie_club/wraith/config.h
index b63854cfdf00..9570742ec870 100644
--- a/keyboards/cutie_club/wraith/config.h
+++ b/keyboards/cutie_club/wraith/config.h
@@ -41,22 +41,6 @@ along with this program. If not, see .
#define LED_CAPS_LOCK_PIN B3
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/bat43/config.h b/keyboards/dailycraft/bat43/config.h
index c8fa546b338a..5e2c1ee9b0ed 100644
--- a/keyboards/dailycraft/bat43/config.h
+++ b/keyboards/dailycraft/bat43/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/dailycraft/claw44/rev1/config.h b/keyboards/dailycraft/claw44/rev1/config.h
index 1dae5a974c84..5c3eabd5b61b 100644
--- a/keyboards/dailycraft/claw44/rev1/config.h
+++ b/keyboards/dailycraft/claw44/rev1/config.h
@@ -26,13 +26,6 @@ along with this program. If not, see .
#define DIODE_DIRECTION COL2ROW
#define SOFT_SERIAL_PIN D2
-/* ws2812 RGB LED */
-/*
-#define RGB_DI_PIN D3
-
-#define RGBLED_NUM 12 // Number of LEDs
-*/
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/dailycraft/owl8/config.h b/keyboards/dailycraft/owl8/config.h
index 259efacb1037..e49ff3341535 100644
--- a/keyboards/dailycraft/owl8/config.h
+++ b/keyboards/dailycraft/owl8/config.h
@@ -23,22 +23,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/sandbox/rev1/config.h b/keyboards/dailycraft/sandbox/rev1/config.h
index 296afd52443e..dd1aeb41fff1 100644
--- a/keyboards/dailycraft/sandbox/rev1/config.h
+++ b/keyboards/dailycraft/sandbox/rev1/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/sandbox/rev2/config.h b/keyboards/dailycraft/sandbox/rev2/config.h
index 1b65b5925baf..0716d6376a17 100644
--- a/keyboards/dailycraft/sandbox/rev2/config.h
+++ b/keyboards/dailycraft/sandbox/rev2/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/stickey4/config.h b/keyboards/dailycraft/stickey4/config.h
index 259efacb1037..e49ff3341535 100644
--- a/keyboards/dailycraft/stickey4/config.h
+++ b/keyboards/dailycraft/stickey4/config.h
@@ -23,22 +23,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/wings42/rev1/config.h b/keyboards/dailycraft/wings42/rev1/config.h
index 5c23f8f4491c..e2617bcb5b1c 100644
--- a/keyboards/dailycraft/wings42/rev1/config.h
+++ b/keyboards/dailycraft/wings42/rev1/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/wings42/rev1_extkeys/config.h b/keyboards/dailycraft/wings42/rev1_extkeys/config.h
index 37b689bcc53d..887654a42947 100644
--- a/keyboards/dailycraft/wings42/rev1_extkeys/config.h
+++ b/keyboards/dailycraft/wings42/rev1_extkeys/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dailycraft/wings42/rev2/config.h b/keyboards/dailycraft/wings42/rev2/config.h
index c9e23f3a8770..4c66d14cd118 100644
--- a/keyboards/dailycraft/wings42/rev2/config.h
+++ b/keyboards/dailycraft/wings42/rev2/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/delikeeb/vaguettelite/config.h b/keyboards/delikeeb/vaguettelite/config.h
index 9556f090c1c4..6f8757744e3d 100644
--- a/keyboards/delikeeb/vaguettelite/config.h
+++ b/keyboards/delikeeb/vaguettelite/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/delikeeb/vanana/rev1/config.h b/keyboards/delikeeb/vanana/rev1/config.h
index 1e2e2997244a..820f1dff4432 100644
--- a/keyboards/delikeeb/vanana/rev1/config.h
+++ b/keyboards/delikeeb/vanana/rev1/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/delikeeb/vanana/rev2/config.h b/keyboards/delikeeb/vanana/rev2/config.h
index b5e41e816166..f3eb340873e6 100644
--- a/keyboards/delikeeb/vanana/rev2/config.h
+++ b/keyboards/delikeeb/vanana/rev2/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/delikeeb/waaffle/rev3/config.h b/keyboards/delikeeb/waaffle/rev3/config.h
index db26f1d23658..4be20d7cb06e 100644
--- a/keyboards/delikeeb/waaffle/rev3/config.h
+++ b/keyboards/delikeeb/waaffle/rev3/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
// # define RGBLIGHT_EFFECT_RGB_TEST
// # define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/deltapad/config.h b/keyboards/deltapad/config.h
index 0775b281db87..08e4c27a2cbb 100644
--- a/keyboards/deltapad/config.h
+++ b/keyboards/deltapad/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h
index d8b1cf9c86b4..c8a1c670060e 100644
--- a/keyboards/dk60/config.h
+++ b/keyboards/dk60/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dm9records/plaid/config.h b/keyboards/dm9records/plaid/config.h
index 510eec241c55..9801c73e2cb3 100644
--- a/keyboards/dm9records/plaid/config.h
+++ b/keyboards/dm9records/plaid/config.h
@@ -40,16 +40,6 @@ along with this program. If not, see .
#define USB_MAX_POWER_CONSUMPTION 100
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/dm9records/tartan/config.h b/keyboards/dm9records/tartan/config.h
index 5c412e4b1ec2..69d2d7bec9ba 100644
--- a/keyboards/dm9records/tartan/config.h
+++ b/keyboards/dm9records/tartan/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/donutcables/scrabblepad/config.h b/keyboards/donutcables/scrabblepad/config.h
index 18b3f7f49811..29e42f12565a 100644
--- a/keyboards/donutcables/scrabblepad/config.h
+++ b/keyboards/donutcables/scrabblepad/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/doppelganger/config.h b/keyboards/doppelganger/config.h
index 0ee19ed94ae4..7d53e1775a2d 100644
--- a/keyboards/doppelganger/config.h
+++ b/keyboards/doppelganger/config.h
@@ -50,22 +50,9 @@ along with this program. If not, see .
#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6
#define RGB_DI_PIN B4
-// #ifdef RGB_DI_PIN
#define RGBLED_NUM 2
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 1, 1 }
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h
index 90cf7d20687f..5a1562f4a4d4 100644
--- a/keyboards/duck/jetfire/config.h
+++ b/keyboards/duck/jetfire/config.h
@@ -28,7 +28,6 @@ along with this program. If not, see .
#define BACKLIGHT_LEVELS 1
#define RGB_DI_PIN D6
-// #ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -40,10 +39,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 23
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
/* Set to top left most key */
#define BOOTMAGIC_LITE_ROW 5
diff --git a/keyboards/ealdin/quadrant/config.h b/keyboards/ealdin/quadrant/config.h
index 7dce5e97ac2e..777d66c7629c 100644
--- a/keyboards/ealdin/quadrant/config.h
+++ b/keyboards/ealdin/quadrant/config.h
@@ -50,12 +50,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/eek/config.h b/keyboards/eek/config.h
index d7bc8c146988..ae42e5c447fe 100644
--- a/keyboards/eek/config.h
+++ b/keyboards/eek/config.h
@@ -47,12 +47,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/efreet/config.h b/keyboards/efreet/config.h
index c7465babe928..98aa5fb507ce 100644
--- a/keyboards/efreet/config.h
+++ b/keyboards/efreet/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_BREATHING
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ein_60/config.h b/keyboards/ein_60/config.h
index 3214af638dea..9f521167533f 100644
--- a/keyboards/ein_60/config.h
+++ b/keyboards/ein_60/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/eniigmakeyboards/ek65/config.h b/keyboards/eniigmakeyboards/ek65/config.h
index a3d22229c032..032cd98e7ab0 100644
--- a/keyboards/eniigmakeyboards/ek65/config.h
+++ b/keyboards/eniigmakeyboards/ek65/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/eniigmakeyboards/ek87/config.h b/keyboards/eniigmakeyboards/ek87/config.h
index 6c58337874b2..b02ea4f66f69 100644
--- a/keyboards/eniigmakeyboards/ek87/config.h
+++ b/keyboards/eniigmakeyboards/ek87/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ericrlau/numdiscipline/rev1/config.h b/keyboards/ericrlau/numdiscipline/rev1/config.h
index fd57969826d6..60d50c2e61cb 100644
--- a/keyboards/ericrlau/numdiscipline/rev1/config.h
+++ b/keyboards/ericrlau/numdiscipline/rev1/config.h
@@ -41,16 +41,6 @@ along with this program. If not, see .
#define USB_MAX_POWER_CONSUMPTION 100
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/eternal_keypad/config.h b/keyboards/eternal_keypad/config.h
index 1a2725899ecd..ac5b8001f70f 100644
--- a/keyboards/eternal_keypad/config.h
+++ b/keyboards/eternal_keypad/config.h
@@ -58,22 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h
index 6508566fb345..8968e0bae3cc 100644
--- a/keyboards/evyd13/atom47/rev5/config.h
+++ b/keyboards/evyd13/atom47/rev5/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h
index 5ef69a022456..e990c53fd1db 100644
--- a/keyboards/evyd13/eon40/config.h
+++ b/keyboards/evyd13/eon40/config.h
@@ -40,22 +40,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h
index fda9ca795eed..844b00b5eb4b 100644
--- a/keyboards/evyd13/eon65/config.h
+++ b/keyboards/evyd13/eon65/config.h
@@ -38,13 +38,7 @@
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN E6
- #ifdef RGB_DI_PIN
#define RGBLED_NUM 10
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -55,13 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
- #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/evyd13/eon75/config.h b/keyboards/evyd13/eon75/config.h
index b11a54b3b767..14826d4e7200 100644
--- a/keyboards/evyd13/eon75/config.h
+++ b/keyboards/evyd13/eon75/config.h
@@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h
index b863c7d171dc..41185940a8c9 100644
--- a/keyboards/evyd13/eon87/config.h
+++ b/keyboards/evyd13/eon87/config.h
@@ -38,13 +38,7 @@
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
#define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -55,13 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h
index cf7a4949830a..e2bcb64cbbad 100644
--- a/keyboards/evyd13/eon95/config.h
+++ b/keyboards/evyd13/eon95/config.h
@@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/gh80_1800/config.h b/keyboards/evyd13/gh80_1800/config.h
index 949d3aed0686..fa90c9baa675 100644
--- a/keyboards/evyd13/gh80_1800/config.h
+++ b/keyboards/evyd13/gh80_1800/config.h
@@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN D4
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/gh80_3700/config.h b/keyboards/evyd13/gh80_3700/config.h
index 5f9487356153..da9857f44809 100644
--- a/keyboards/evyd13/gh80_3700/config.h
+++ b/keyboards/evyd13/gh80_3700/config.h
@@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN B2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 8
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/gud70/config.h b/keyboards/evyd13/gud70/config.h
index cd2b13e4873a..0356b5fa9036 100644
--- a/keyboards/evyd13/gud70/config.h
+++ b/keyboards/evyd13/gud70/config.h
@@ -42,22 +42,6 @@
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/evyd13/minitomic/config.h b/keyboards/evyd13/minitomic/config.h
index 50630fa14630..8900b1aed83a 100644
--- a/keyboards/evyd13/minitomic/config.h
+++ b/keyboards/evyd13/minitomic/config.h
@@ -40,22 +40,6 @@
#define LED_CAPS_LOCK_PIN C7
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h
index f98be7fbe4c9..f545dae2c54e 100644
--- a/keyboards/evyd13/mx5160/config.h
+++ b/keyboards/evyd13/mx5160/config.h
@@ -47,22 +47,6 @@
#define LED_SCROLL_LOCK_PIN B3
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/nt660/config.h b/keyboards/evyd13/nt660/config.h
index e3313a551ebb..be29373bc2f4 100644
--- a/keyboards/evyd13/nt660/config.h
+++ b/keyboards/evyd13/nt660/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
#define LED_CAPS_LOCK_PIN D0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/nt750/config.h b/keyboards/evyd13/nt750/config.h
index 93c3716442f8..de75669121e9 100644
--- a/keyboards/evyd13/nt750/config.h
+++ b/keyboards/evyd13/nt750/config.h
@@ -41,22 +41,6 @@ along with this program. If not, see .
#define LED_CAPS_LOCK_PIN D5
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/nt980/config.h b/keyboards/evyd13/nt980/config.h
index 278f9b89da77..b39704b3c559 100644
--- a/keyboards/evyd13/nt980/config.h
+++ b/keyboards/evyd13/nt980/config.h
@@ -43,22 +43,6 @@ along with this program. If not, see .
#define LED_SCROLL_LOCK_PIN B7
#define LED_PIN_ON_STATE 0
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/omrontkl/config.h b/keyboards/evyd13/omrontkl/config.h
index 4a98650e3a04..e632fd75cc20 100644
--- a/keyboards/evyd13/omrontkl/config.h
+++ b/keyboards/evyd13/omrontkl/config.h
@@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN D0
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 12
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/pockettype/config.h b/keyboards/evyd13/pockettype/config.h
index d7068599b09c..27c8bf330ccc 100644
--- a/keyboards/evyd13/pockettype/config.h
+++ b/keyboards/evyd13/pockettype/config.h
@@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/quackfire/config.h b/keyboards/evyd13/quackfire/config.h
index 71057597695e..4115accaf34b 100644
--- a/keyboards/evyd13/quackfire/config.h
+++ b/keyboards/evyd13/quackfire/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define LED_SCROLL_LOCK_PIN F6
#define LED_PIN_ON_STATE 0
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/solheim68/config.h b/keyboards/evyd13/solheim68/config.h
index 6050fe437bea..e1073cb67588 100644
--- a/keyboards/evyd13/solheim68/config.h
+++ b/keyboards/evyd13/solheim68/config.h
@@ -37,22 +37,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h
index b82d77d6913a..21c4435df477 100644
--- a/keyboards/evyd13/wasdat_code/config.h
+++ b/keyboards/evyd13/wasdat_code/config.h
@@ -52,22 +52,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/exclusive/e7v1se/config.h b/keyboards/exclusive/e7v1se/config.h
index deee63c6b685..31c27ccdb7a3 100644
--- a/keyboards/exclusive/e7v1se/config.h
+++ b/keyboards/exclusive/e7v1se/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/fc660c/keymaps/default_rgb/config.h b/keyboards/fc660c/keymaps/default_rgb/config.h
index 8a9a44430175..48a7a053cb41 100644
--- a/keyboards/fc660c/keymaps/default_rgb/config.h
+++ b/keyboards/fc660c/keymaps/default_rgb/config.h
@@ -39,10 +39,4 @@
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#define RGBLIGHT_EFFECT_RGB_TEST
//#define RGBLIGHT_EFFECT_ALTERNATING
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- //#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- //#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- //#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/fc660c/keymaps/via_rgb/config.h b/keyboards/fc660c/keymaps/via_rgb/config.h
index 8a9a44430175..48a7a053cb41 100644
--- a/keyboards/fc660c/keymaps/via_rgb/config.h
+++ b/keyboards/fc660c/keymaps/via_rgb/config.h
@@ -39,10 +39,4 @@
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#define RGBLIGHT_EFFECT_RGB_TEST
//#define RGBLIGHT_EFFECT_ALTERNATING
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- //#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- //#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- //#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/fjlabs/bolsa65/config.h b/keyboards/fjlabs/bolsa65/config.h
index aa70f38d4b3e..8ba0e41742d5 100644
--- a/keyboards/fjlabs/bolsa65/config.h
+++ b/keyboards/fjlabs/bolsa65/config.h
@@ -45,21 +45,6 @@ along with this program. If not, see .
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* Define RGB Underglow
-#define RGB_DI_PIN B0
-#define RGBLED_NUM 24
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE */
-/* #define RGBLIGHT_LAYER_BLINK*/
-
/* Define less important options */
/*
diff --git a/keyboards/flehrad/downbubble/config.h b/keyboards/flehrad/downbubble/config.h
index 1dfd1d3ec95f..5983a5f3ce1f 100644
--- a/keyboards/flehrad/downbubble/config.h
+++ b/keyboards/flehrad/downbubble/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/fluorite/config.h b/keyboards/fluorite/config.h
index 8cf0cd5e41f2..a70ac86038b4 100644
--- a/keyboards/fluorite/config.h
+++ b/keyboards/fluorite/config.h
@@ -43,16 +43,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/foostan/cornelius/config.h b/keyboards/foostan/cornelius/config.h
index aebb5ad9b9f6..a4814ea24fe9 100644
--- a/keyboards/foostan/cornelius/config.h
+++ b/keyboards/foostan/cornelius/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/foxlab/time80/config.h b/keyboards/foxlab/time80/config.h
index e89352113cb2..eee828d28f8e 100644
--- a/keyboards/foxlab/time80/config.h
+++ b/keyboards/foxlab/time80/config.h
@@ -38,12 +38,6 @@ along with this program. If not, see .
//#define RGBLIGHT_VAL_STEP 8
//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/gkeyboard/gkb_m16/config.h b/keyboards/gkeyboard/gkb_m16/config.h
index 07b0f14714ff..0ad351a1289d 100644
--- a/keyboards/gkeyboard/gkb_m16/config.h
+++ b/keyboards/gkeyboard/gkb_m16/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/gray_studio/aero75/config.h b/keyboards/gray_studio/aero75/config.h
index 39cfa1b31cca..40c39681f302 100644
--- a/keyboards/gray_studio/aero75/config.h
+++ b/keyboards/gray_studio/aero75/config.h
@@ -46,16 +46,6 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/grid600/press/config.h b/keyboards/grid600/press/config.h
index c5cd55be0636..659154758f4f 100644
--- a/keyboards/grid600/press/config.h
+++ b/keyboards/grid600/press/config.h
@@ -57,12 +57,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/han60/config.h b/keyboards/han60/config.h
index 73ffdca7ef60..12de44060751 100644
--- a/keyboards/han60/config.h
+++ b/keyboards/han60/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/6macro/config.h b/keyboards/handwired/6macro/config.h
index be49502c0cce..d4d0b7385c29 100644
--- a/keyboards/handwired/6macro/config.h
+++ b/keyboards/handwired/6macro/config.h
@@ -46,9 +46,3 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h
index 4637faebbc5a..c4b715b859fd 100644
--- a/keyboards/handwired/aranck/config.h
+++ b/keyboards/handwired/aranck/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/bolek/config.h b/keyboards/handwired/bolek/config.h
index f3caa3626f34..645e05039e8f 100644
--- a/keyboards/handwired/bolek/config.h
+++ b/keyboards/handwired/bolek/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/bstk100/config.h b/keyboards/handwired/bstk100/config.h
index edd2cc739d05..31a2d42769e3 100644
--- a/keyboards/handwired/bstk100/config.h
+++ b/keyboards/handwired/bstk100/config.h
@@ -48,22 +48,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h
index 0fb1f9977a13..cc3329bd177b 100644
--- a/keyboards/handwired/dactyl_left/config.h
+++ b/keyboards/handwired/dactyl_left/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h
index 3c4525cab7d3..817473a125b0 100644
--- a/keyboards/handwired/evk/v1_3/config.h
+++ b/keyboards/handwired/evk/v1_3/config.h
@@ -41,22 +41,6 @@ along with this program. If not, see .
/* define whiche Pins to use for the status LEDs*/
#define LED_CAPS_LOCK_PIN D4
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h
index ef608af83c3b..fdb956e19649 100644
--- a/keyboards/handwired/floorboard/config.h
+++ b/keyboards/handwired/floorboard/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h
index d5a69319741f..f4ba32d5a650 100644
--- a/keyboards/handwired/frankie_macropad/config.h
+++ b/keyboards/handwired/frankie_macropad/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h
index 8a6145ed59ed..e7c0de6f9fdd 100644
--- a/keyboards/handwired/hacked_motospeed/config.h
+++ b/keyboards/handwired/hacked_motospeed/config.h
@@ -45,16 +45,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* define if matrix has ghost (lacks anti-ghosting diodes) */
#define MATRIX_HAS_GHOST
diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h
index 2aed3406077f..3c8b0d4d6f3b 100644
--- a/keyboards/handwired/heisenberg/config.h
+++ b/keyboards/handwired/heisenberg/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h
index d49f4e748351..5206587e5af9 100644
--- a/keyboards/handwired/hnah40/config.h
+++ b/keyboards/handwired/hnah40/config.h
@@ -37,14 +37,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING 5
diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h
index 25245a0180e5..85c9681c2788 100644
--- a/keyboards/handwired/jtallbean/split_65/config.h
+++ b/keyboards/handwired/jtallbean/split_65/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
#define SPLIT_HAND_PIN D5
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h
index 91eeac9ce7c2..960af5538896 100644
--- a/keyboards/handwired/juliet/config.h
+++ b/keyboards/handwired/juliet/config.h
@@ -41,16 +41,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/lemonpad/config.h b/keyboards/handwired/lemonpad/config.h
index d1e992c215b6..966e3d16f6e6 100644
--- a/keyboards/handwired/lemonpad/config.h
+++ b/keyboards/handwired/lemonpad/config.h
@@ -16,22 +16,6 @@
#pragma once
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h
index 885e8e38b494..400a787c0248 100644
--- a/keyboards/handwired/mechboards_micropad/config.h
+++ b/keyboards/handwired/mechboards_micropad/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/oem_ansi_fullsize/config.h b/keyboards/handwired/oem_ansi_fullsize/config.h
index 1d6e67c7206d..3687ae6994f0 100644
--- a/keyboards/handwired/oem_ansi_fullsize/config.h
+++ b/keyboards/handwired/oem_ansi_fullsize/config.h
@@ -51,22 +51,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h
index c84bb3658893..9eff47d07e4d 100644
--- a/keyboards/handwired/owlet60/config.h
+++ b/keyboards/handwired/owlet60/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h
index 548493de614b..71d2ee2a3f40 100644
--- a/keyboards/handwired/sick68/config.h
+++ b/keyboards/handwired/sick68/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h
index 3039ea2aae91..6bb7b1c82ab1 100644
--- a/keyboards/handwired/snatchpad/config.h
+++ b/keyboards/handwired/snatchpad/config.h
@@ -35,22 +35,6 @@
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/split89/config.h b/keyboards/handwired/split89/config.h
index 3e24cb43776a..3f4934dd8b78 100644
--- a/keyboards/handwired/split89/config.h
+++ b/keyboards/handwired/split89/config.h
@@ -60,22 +60,6 @@ COLS = number of cols per side which curently needs to be equal so there are bla
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h
index 538612f07888..cb09c8457369 100644
--- a/keyboards/handwired/sticc14/config.h
+++ b/keyboards/handwired/sticc14/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/symmetric70_proto/promicro/config.h b/keyboards/handwired/symmetric70_proto/promicro/config.h
index 584161a9d374..29bfbaae37cc 100644
--- a/keyboards/handwired/symmetric70_proto/promicro/config.h
+++ b/keyboards/handwired/symmetric70_proto/promicro/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/symmetric70_proto/proton_c/config.h b/keyboards/handwired/symmetric70_proto/proton_c/config.h
index 8c5d5d7c7e3a..e757e1e776fe 100644
--- a/keyboards/handwired/symmetric70_proto/proton_c/config.h
+++ b/keyboards/handwired/symmetric70_proto/proton_c/config.h
@@ -52,22 +52,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h
index b427add9d17a..ff9a7127494f 100644
--- a/keyboards/handwired/traveller/config.h
+++ b/keyboards/handwired/traveller/config.h
@@ -46,12 +46,6 @@ along with this program. If not, see .
# define RGBLIGHT_VAL_STEP 17
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h
index f8ebc56b8eb7..516940c070c6 100644
--- a/keyboards/handwired/twadlee/tp69/config.h
+++ b/keyboards/handwired/twadlee/tp69/config.h
@@ -41,22 +41,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h
index e8e6a5223668..d30a885eaade 100644
--- a/keyboards/handwired/woodpad/config.h
+++ b/keyboards/handwired/woodpad/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h
index 4ed32ed89ce2..a9e3f566d7c4 100644
--- a/keyboards/hineybush/h08_ocelot/config.h
+++ b/keyboards/hineybush/h08_ocelot/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/h10/config.h b/keyboards/hineybush/h10/config.h
index a372e9a108ca..21434ce83b8c 100644
--- a/keyboards/hineybush/h10/config.h
+++ b/keyboards/hineybush/h10/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/hineybush/h60/config.h b/keyboards/hineybush/h60/config.h
index fc9b439620cd..d3949ad3fda5 100644
--- a/keyboards/hineybush/h60/config.h
+++ b/keyboards/hineybush/h60/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h
index e341a819c95f..bec83000703f 100644
--- a/keyboards/hineybush/h65/config.h
+++ b/keyboards/hineybush/h65/config.h
@@ -66,12 +66,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h
index e341a819c95f..bec83000703f 100644
--- a/keyboards/hineybush/h65_hotswap/config.h
+++ b/keyboards/hineybush/h65_hotswap/config.h
@@ -66,12 +66,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/h660s/config.h b/keyboards/hineybush/h660s/config.h
index fd70620d7c71..238a8996773d 100644
--- a/keyboards/hineybush/h660s/config.h
+++ b/keyboards/hineybush/h660s/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h
index 56198be76781..4dfc0b195ac8 100644
--- a/keyboards/hineybush/h75_singa/config.h
+++ b/keyboards/hineybush/h75_singa/config.h
@@ -61,12 +61,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h
index d1f9bd47d99f..ec42079f70a4 100644
--- a/keyboards/hineybush/physix/config.h
+++ b/keyboards/hineybush/physix/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h
index 382f1cfeb361..fb7ebf53d839 100644
--- a/keyboards/hineybush/sm68/config.h
+++ b/keyboards/hineybush/sm68/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/hnahkb/freyr/config.h b/keyboards/hnahkb/freyr/config.h
index 655921c24414..34bab3085f9c 100644
--- a/keyboards/hnahkb/freyr/config.h
+++ b/keyboards/hnahkb/freyr/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_BREATHING
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/hnahkb/stella/config.h b/keyboards/hnahkb/stella/config.h
index bb6b1f2726f7..027c11d747a1 100644
--- a/keyboards/hnahkb/stella/config.h
+++ b/keyboards/hnahkb/stella/config.h
@@ -47,20 +47,7 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
-# define RGBLED_NUM 14
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-#endif
+#define RGBLED_NUM 14
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/hnahkb/vn66/config.h b/keyboards/hnahkb/vn66/config.h
index 276e34a5355b..90e9b02ae1a0 100644
--- a/keyboards/hnahkb/vn66/config.h
+++ b/keyboards/hnahkb/vn66/config.h
@@ -67,12 +67,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/ianklug/grooveboard/config.h b/keyboards/ianklug/grooveboard/config.h
index d2bd499e0d9a..c88aadfd8a42 100644
--- a/keyboards/ianklug/grooveboard/config.h
+++ b/keyboards/ianklug/grooveboard/config.h
@@ -23,22 +23,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/illuminati/is0/config.h b/keyboards/illuminati/is0/config.h
index 4ae9198fa099..cef9bdb25f65 100644
--- a/keyboards/illuminati/is0/config.h
+++ b/keyboards/illuminati/is0/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/irene/config.h b/keyboards/irene/config.h
index 33e7536674ef..e58f34b2ae86 100644
--- a/keyboards/irene/config.h
+++ b/keyboards/irene/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/iriskeyboards/config.h b/keyboards/iriskeyboards/config.h
index 6a97bc8bd686..588bf93e0a12 100644
--- a/keyboards/iriskeyboards/config.h
+++ b/keyboards/iriskeyboards/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/jm60/config.h b/keyboards/jm60/config.h
index fac7fab96dc7..edca6a1a69f2 100644
--- a/keyboards/jm60/config.h
+++ b/keyboards/jm60/config.h
@@ -37,22 +37,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/jones/v03/config.h b/keyboards/jones/v03/config.h
index 8845a40299ad..f04b9cc78e36 100644
--- a/keyboards/jones/v03/config.h
+++ b/keyboards/jones/v03/config.h
@@ -74,12 +74,6 @@ along with this program. If not, see .
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
- // /*== customize breathing effect ==*/
- // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- // /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/jones/v03_1/config.h b/keyboards/jones/v03_1/config.h
index 84e4e01e284f..b0d12c81558a 100644
--- a/keyboards/jones/v03_1/config.h
+++ b/keyboards/jones/v03_1/config.h
@@ -75,12 +75,6 @@ along with this program. If not, see .
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
- // /*== customize breathing effect ==*/
- // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- // /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/kagizaraya/chidori/config.h b/keyboards/kagizaraya/chidori/config.h
index ef9b2e944b30..4a90a41d9d92 100644
--- a/keyboards/kagizaraya/chidori/config.h
+++ b/keyboards/kagizaraya/chidori/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
// #define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kakunpc/angel17/alpha/config.h b/keyboards/kakunpc/angel17/alpha/config.h
index f0fb679ab095..e5edc0c1c654 100644
--- a/keyboards/kakunpc/angel17/alpha/config.h
+++ b/keyboards/kakunpc/angel17/alpha/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kakunpc/angel17/rev1/config.h b/keyboards/kakunpc/angel17/rev1/config.h
index c5e23ea37ab9..c105fcc543c7 100644
--- a/keyboards/kakunpc/angel17/rev1/config.h
+++ b/keyboards/kakunpc/angel17/rev1/config.h
@@ -46,12 +46,6 @@ along with this program. If not, see .
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kakunpc/angel64/alpha/config.h b/keyboards/kakunpc/angel64/alpha/config.h
index c09514748089..39d8fcf0cd73 100644
--- a/keyboards/kakunpc/angel64/alpha/config.h
+++ b/keyboards/kakunpc/angel64/alpha/config.h
@@ -47,12 +47,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kakunpc/angel64/rev1/config.h b/keyboards/kakunpc/angel64/rev1/config.h
index c09514748089..39d8fcf0cd73 100644
--- a/keyboards/kakunpc/angel64/rev1/config.h
+++ b/keyboards/kakunpc/angel64/rev1/config.h
@@ -47,12 +47,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kakunpc/choc_taro/config.h b/keyboards/kakunpc/choc_taro/config.h
index f7cdbac273f7..cbb2a934a0f7 100644
--- a/keyboards/kakunpc/choc_taro/config.h
+++ b/keyboards/kakunpc/choc_taro/config.h
@@ -34,22 +34,6 @@ along with this program. If not, see .
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kakunpc/rabbit_capture_plan/config.h b/keyboards/kakunpc/rabbit_capture_plan/config.h
index f195671f4df3..363c7fb6a476 100644
--- a/keyboards/kakunpc/rabbit_capture_plan/config.h
+++ b/keyboards/kakunpc/rabbit_capture_plan/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kakunpc/thedogkeyboard/config.h b/keyboards/kakunpc/thedogkeyboard/config.h
index d741f9d7a76d..fe05231b6f4c 100644
--- a/keyboards/kakunpc/thedogkeyboard/config.h
+++ b/keyboards/kakunpc/thedogkeyboard/config.h
@@ -43,12 +43,6 @@ along with this program. If not, see .
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 50 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kb58/config.h b/keyboards/kb58/config.h
index d3e9b611ecf5..a3fc5f697e92 100644
--- a/keyboards/kb58/config.h
+++ b/keyboards/kb58/config.h
@@ -51,22 +51,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kbdclack/kaishi65/config.h b/keyboards/kbdclack/kaishi65/config.h
index 515ff1139e04..14cb509ebb88 100644
--- a/keyboards/kbdclack/kaishi65/config.h
+++ b/keyboards/kbdclack/kaishi65/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kbdfans/kbd8x_mk2/config.h b/keyboards/kbdfans/kbd8x_mk2/config.h
index 294dae0efe8c..b13e23eb0097 100644
--- a/keyboards/kbdfans/kbd8x_mk2/config.h
+++ b/keyboards/kbdfans/kbd8x_mk2/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kbdfans/kbdpad/mk2/config.h b/keyboards/kbdfans/kbdpad/mk2/config.h
index 7a80d0183e2c..f4f8b2aef3d9 100644
--- a/keyboards/kbdfans/kbdpad/mk2/config.h
+++ b/keyboards/kbdfans/kbdpad/mk2/config.h
@@ -64,12 +64,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h
index 45bf2ac40a2c..376a83a73ecb 100644
--- a/keyboards/kc60/config.h
+++ b/keyboards/kc60/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/keebwerk/nano_slider/config.h b/keyboards/keebwerk/nano_slider/config.h
index 084f178137e1..f5908a0d3a54 100644
--- a/keyboards/keebwerk/nano_slider/config.h
+++ b/keyboards/keebwerk/nano_slider/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/keebzdotnet/wazowski/config.h b/keyboards/keebzdotnet/wazowski/config.h
index 686e2323ebe8..adf5add516cc 100644
--- a/keyboards/keebzdotnet/wazowski/config.h
+++ b/keyboards/keebzdotnet/wazowski/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/keycapsss/o4l_5x12/config.h b/keyboards/keycapsss/o4l_5x12/config.h
index 1df450aebe8c..04c7cdb75a28 100644
--- a/keyboards/keycapsss/o4l_5x12/config.h
+++ b/keyboards/keycapsss/o4l_5x12/config.h
@@ -39,12 +39,6 @@
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/keyhive/absinthe/config.h b/keyboards/keyhive/absinthe/config.h
index d67bc0924012..dcdcaaa12ba6 100644
--- a/keyboards/keyhive/absinthe/config.h
+++ b/keyboards/keyhive/absinthe/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/keyhive/ergosaurus/config.h b/keyboards/keyhive/ergosaurus/config.h
index a55c877bc377..4f3bb7681fc9 100644
--- a/keyboards/keyhive/ergosaurus/config.h
+++ b/keyboards/keyhive/ergosaurus/config.h
@@ -57,12 +57,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/keyhive/maypad/config.h b/keyboards/keyhive/maypad/config.h
index 72fa093e9c31..bae033cb363e 100644
--- a/keyboards/keyhive/maypad/config.h
+++ b/keyboards/keyhive/maypad/config.h
@@ -35,22 +35,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/keyhive/smallice/config.h b/keyboards/keyhive/smallice/config.h
index f95cb4544431..7edff95279f2 100644
--- a/keyboards/keyhive/smallice/config.h
+++ b/keyboards/keyhive/smallice/config.h
@@ -56,10 +56,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/keyhive/uno/rev1/config.h b/keyboards/keyhive/uno/rev1/config.h
index 7c5e60fdc8bf..b706f26ce2f1 100644
--- a/keyboards/keyhive/uno/rev1/config.h
+++ b/keyboards/keyhive/uno/rev1/config.h
@@ -22,19 +22,3 @@
#define RGB_DI_PIN F6
#define RGBLED_NUM 1
#endif
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 32
-// #define RGBLIGHT_SAT_STEP 32
-// #define RGBLIGHT_VAL_STEP 32
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
diff --git a/keyboards/keyprez/bison/config.h b/keyboards/keyprez/bison/config.h
index e09ebf59ed14..48b231bc69d0 100644
--- a/keyboards/keyprez/bison/config.h
+++ b/keyboards/keyprez/bison/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
#define ENCODERS_PAD_A { B6 }
#define ENCODERS_PAD_B { B5 }
#define ENCODERS_PAD_A_RIGHT { B5 }
diff --git a/keyboards/keyprez/unicorn/config.h b/keyboards/keyprez/unicorn/config.h
index 745463449576..5705f25e2880 100644
--- a/keyboards/keyprez/unicorn/config.h
+++ b/keyboards/keyprez/unicorn/config.h
@@ -38,22 +38,6 @@
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kindakeyboards/conone65/config.h b/keyboards/kindakeyboards/conone65/config.h
index 40cd8ead2298..eeaf32a21973 100644
--- a/keyboards/kindakeyboards/conone65/config.h
+++ b/keyboards/kindakeyboards/conone65/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kiwikey/borderland/config.h b/keyboards/kiwikey/borderland/config.h
index 847b525a9ba9..5322aa2031f0 100644
--- a/keyboards/kiwikey/borderland/config.h
+++ b/keyboards/kiwikey/borderland/config.h
@@ -47,12 +47,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/kiwikey/kawii9/config.h b/keyboards/kiwikey/kawii9/config.h
index eb7c8c889cad..91d5d2caa660 100644
--- a/keyboards/kiwikey/kawii9/config.h
+++ b/keyboards/kiwikey/kawii9/config.h
@@ -39,7 +39,6 @@ along with this program. If not, see .
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 // Ver1: F0, Ver2: D3
-//#ifdef RGB_DI_PIN
#define RGBLED_NUM 4
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
@@ -56,13 +55,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/kiwikey/wanderland/config.h b/keyboards/kiwikey/wanderland/config.h
index 051d0431115a..0aaf536bc7e3 100644
--- a/keyboards/kiwikey/wanderland/config.h
+++ b/keyboards/kiwikey/wanderland/config.h
@@ -48,7 +48,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define RGB_DI_PIN F7
-//#ifdef RGB_DI_PIN
#define RGBLED_NUM 18
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
@@ -65,13 +64,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/kkatano/bakeneko80/config.h b/keyboards/kkatano/bakeneko80/config.h
index ec6cbcea6174..90c4fb55a4c7 100644
--- a/keyboards/kkatano/bakeneko80/config.h
+++ b/keyboards/kkatano/bakeneko80/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kkatano/wallaby/config.h b/keyboards/kkatano/wallaby/config.h
index 5e61867d9f36..3033b9f85113 100644
--- a/keyboards/kkatano/wallaby/config.h
+++ b/keyboards/kkatano/wallaby/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kkatano/yurei/config.h b/keyboards/kkatano/yurei/config.h
index ece2e5fd932b..84dbe913db6f 100644
--- a/keyboards/kkatano/yurei/config.h
+++ b/keyboards/kkatano/yurei/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/kprepublic/cospad/config.h b/keyboards/kprepublic/cospad/config.h
index ea3bb0d20b0d..ffa6a3035450 100644
--- a/keyboards/kprepublic/cospad/config.h
+++ b/keyboards/kprepublic/cospad/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/ktec/daisy/config.h b/keyboards/ktec/daisy/config.h
index 3f256af5ca6f..db86f3b508cd 100644
--- a/keyboards/ktec/daisy/config.h
+++ b/keyboards/ktec/daisy/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/ktec/staryu/config.h b/keyboards/ktec/staryu/config.h
index 1826763cbfa1..d2fb24f35dea 100755
--- a/keyboards/ktec/staryu/config.h
+++ b/keyboards/ktec/staryu/config.h
@@ -29,13 +29,7 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_LIMIT_VAL 200
-// #ifdef RGB_DI_PIN
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
+
#undef BACKLIGHT_PIN
#define BACKLIGHT_PINS { C2, C7, D5, D6, B0 }
diff --git a/keyboards/ky01/config.h b/keyboards/ky01/config.h
index 17b4e43e802b..8625a81036bc 100644
--- a/keyboards/ky01/config.h
+++ b/keyboards/ky01/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/labyrinth75/config.h b/keyboards/labyrinth75/config.h
index d46784e99140..c5cf081aac21 100644
--- a/keyboards/labyrinth75/config.h
+++ b/keyboards/labyrinth75/config.h
@@ -39,7 +39,6 @@ along with this program. If not, see .
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN B0 //D5 could also be the other pin maybe
-//#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
@@ -56,13 +55,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/latincompass/latin6rgb/config.h b/keyboards/latincompass/latin6rgb/config.h
index a607701668a5..552256c1d27c 100644
--- a/keyboards/latincompass/latin6rgb/config.h
+++ b/keyboards/latincompass/latin6rgb/config.h
@@ -104,13 +104,5 @@
#define DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 6
#endif
-//#define RGB_DI_PIN B7
-//#ifdef RGB_DI_PIN
-//#define RGBLED_NUM 8
-//#define RGBLIGHT_HUE_STEP 5
-//#define RGBLIGHT_SAT_STEP 5
-//#define RGBLIGHT_VAL_STEP 5
-//#define RGBLIGHT_SLEEP
-//#endif
#define B7_AUDIO
diff --git a/keyboards/lfkeyboards/smk65/revf/config.h b/keyboards/lfkeyboards/smk65/revf/config.h
index cd7db7f0ae2f..9df1e86172d7 100644
--- a/keyboards/lfkeyboards/smk65/revf/config.h
+++ b/keyboards/lfkeyboards/smk65/revf/config.h
@@ -35,21 +35,7 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-# define RGBLED_NUM 28
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
+#define RGBLED_NUM 28
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/lizard_trick/tenkey_plusplus/config.h b/keyboards/lizard_trick/tenkey_plusplus/config.h
index 6c393a878493..8cb90474f51f 100644
--- a/keyboards/lizard_trick/tenkey_plusplus/config.h
+++ b/keyboards/lizard_trick/tenkey_plusplus/config.h
@@ -50,22 +50,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/lm_keyboard/lm60n/config.h b/keyboards/lm_keyboard/lm60n/config.h
index 37faa1b790e6..616dc9a9556a 100644
--- a/keyboards/lm_keyboard/lm60n/config.h
+++ b/keyboards/lm_keyboard/lm60n/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/lz/erghost/config.h b/keyboards/lz/erghost/config.h
index 8cf87f96447f..1bd17f3e18b6 100644
--- a/keyboards/lz/erghost/config.h
+++ b/keyboards/lz/erghost/config.h
@@ -65,10 +65,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/machine_industries/m4_a/config.h b/keyboards/machine_industries/m4_a/config.h
index 6db3fc11cca4..2e8c30c878f0 100644
--- a/keyboards/machine_industries/m4_a/config.h
+++ b/keyboards/machine_industries/m4_a/config.h
@@ -30,22 +30,6 @@
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/manta60/config.h b/keyboards/manta60/config.h
index f453ab32ea7e..e0249bf45f68 100644
--- a/keyboards/manta60/config.h
+++ b/keyboards/manta60/config.h
@@ -69,12 +69,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
diff --git a/keyboards/marksard/leftover30/config.h b/keyboards/marksard/leftover30/config.h
index 7862f8994119..dfc6c2ccbb96 100644
--- a/keyboards/marksard/leftover30/config.h
+++ b/keyboards/marksard/leftover30/config.h
@@ -61,12 +61,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/marksard/rhymestone/rev1/config.h b/keyboards/marksard/rhymestone/rev1/config.h
index 044ad8fb5da5..46e540295794 100644
--- a/keyboards/marksard/rhymestone/rev1/config.h
+++ b/keyboards/marksard/rhymestone/rev1/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/marksard/treadstone32/lite/config.h b/keyboards/marksard/treadstone32/lite/config.h
index d801cb444241..1a75769630ce 100644
--- a/keyboards/marksard/treadstone32/lite/config.h
+++ b/keyboards/marksard/treadstone32/lite/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
diff --git a/keyboards/marksard/treadstone32/rev1/config.h b/keyboards/marksard/treadstone32/rev1/config.h
index 00ca0d2e10d4..fb85ffe47fe4 100644
--- a/keyboards/marksard/treadstone32/rev1/config.h
+++ b/keyboards/marksard/treadstone32/rev1/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
diff --git a/keyboards/marksard/treadstone48/rev1/config.h b/keyboards/marksard/treadstone48/rev1/config.h
index 3154a2030c6e..c144fd3784b2 100644
--- a/keyboards/marksard/treadstone48/rev1/config.h
+++ b/keyboards/marksard/treadstone48/rev1/config.h
@@ -66,12 +66,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/marksard/treadstone48/rev2/config.h b/keyboards/marksard/treadstone48/rev2/config.h
index 808240543330..6f7fb3065a27 100644
--- a/keyboards/marksard/treadstone48/rev2/config.h
+++ b/keyboards/marksard/treadstone48/rev2/config.h
@@ -55,12 +55,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechlovin/foundation/config.h b/keyboards/mechlovin/foundation/config.h
index 0e2be4f06175..2e8c992d10b1 100644
--- a/keyboards/mechlovin/foundation/config.h
+++ b/keyboards/mechlovin/foundation/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
// Encoder pins
diff --git a/keyboards/mechlovin/infinity87/rev2/config.h b/keyboards/mechlovin/infinity87/rev2/config.h
index acfa7f9c1fd1..e619e818de10 100644
--- a/keyboards/mechlovin/infinity87/rev2/config.h
+++ b/keyboards/mechlovin/infinity87/rev2/config.h
@@ -58,10 +58,4 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/mechlovin/jay60/config.h b/keyboards/mechlovin/jay60/config.h
index 73a97ed30490..e294c09bee95 100644
--- a/keyboards/mechlovin/jay60/config.h
+++ b/keyboards/mechlovin/jay60/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/mechlovin/kay60/config.h b/keyboards/mechlovin/kay60/config.h
index d2d9b0cc857e..815392505a10 100644
--- a/keyboards/mechlovin/kay60/config.h
+++ b/keyboards/mechlovin/kay60/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/mechlovin/kay65/config.h b/keyboards/mechlovin/kay65/config.h
index b112417a6a75..01c35c91ef19 100644
--- a/keyboards/mechlovin/kay65/config.h
+++ b/keyboards/mechlovin/kay65/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/mechlovin/olly/orion/config.h b/keyboards/mechlovin/olly/orion/config.h
index 4a9c884aebf9..79008bdcad19 100644
--- a/keyboards/mechlovin/olly/orion/config.h
+++ b/keyboards/mechlovin/olly/orion/config.h
@@ -60,10 +60,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/mechlovin/serratus/config.h b/keyboards/mechlovin/serratus/config.h
index 752f984c4529..385f318b22eb 100644
--- a/keyboards/mechlovin/serratus/config.h
+++ b/keyboards/mechlovin/serratus/config.h
@@ -65,10 +65,4 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/mechlovin/zed60/config.h b/keyboards/mechlovin/zed60/config.h
index d19c2de53dba..83f2202b207b 100644
--- a/keyboards/mechlovin/zed60/config.h
+++ b/keyboards/mechlovin/zed60/config.h
@@ -65,10 +65,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/mechlovin/zed65/mono_led/config.h b/keyboards/mechlovin/zed65/mono_led/config.h
index 7afa6c318216..e4f0e744b3de 100644
--- a/keyboards/mechlovin/zed65/mono_led/config.h
+++ b/keyboards/mechlovin/zed65/mono_led/config.h
@@ -88,10 +88,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
index 84df3b11d15e..c3e287c7a401 100644
--- a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
+++ b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
@@ -52,10 +52,4 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
\ No newline at end of file
diff --git a/keyboards/mechwild/mokulua/mirrored/config.h b/keyboards/mechwild/mokulua/mirrored/config.h
index 4d1e9346e6ec..1da099578238 100644
--- a/keyboards/mechwild/mokulua/mirrored/config.h
+++ b/keyboards/mechwild/mokulua/mirrored/config.h
@@ -57,12 +57,6 @@
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h
index 99257c373162..c39902460039 100644
--- a/keyboards/mechwild/mokulua/standard/config.h
+++ b/keyboards/mechwild/mokulua/standard/config.h
@@ -57,12 +57,6 @@
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechwild/murphpad/config.h b/keyboards/mechwild/murphpad/config.h
index 4d32dc71ecfe..3770b924fde9 100644
--- a/keyboards/mechwild/murphpad/config.h
+++ b/keyboards/mechwild/murphpad/config.h
@@ -57,12 +57,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h
index c3fa5f81f1a6..b3e4308e20f1 100644
--- a/keyboards/mechwild/obe/config.h
+++ b/keyboards/mechwild/obe/config.h
@@ -69,12 +69,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h
index de31b7c383e8..bb14fdfb68c5 100644
--- a/keyboards/mechwild/puckbuddy/config.h
+++ b/keyboards/mechwild/puckbuddy/config.h
@@ -79,12 +79,6 @@
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h
index 0573c5b077bf..adbc3c843945 100644
--- a/keyboards/mechwild/waka60/config.h
+++ b/keyboards/mechwild/waka60/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/meow48/config.h b/keyboards/meow48/config.h
index 7204dc9ae441..dfb59c753b0b 100644
--- a/keyboards/meow48/config.h
+++ b/keyboards/meow48/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/meow65/config.h b/keyboards/meow65/config.h
index 859b01939481..9dfef2d03958 100644
--- a/keyboards/meow65/config.h
+++ b/keyboards/meow65/config.h
@@ -44,23 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/meson/config.h b/keyboards/meson/config.h
index 69bfb299a085..6d66284ae172 100644
--- a/keyboards/meson/config.h
+++ b/keyboards/meson/config.h
@@ -51,12 +51,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/molecule/config.h b/keyboards/molecule/config.h
index ea5bebcbec69..1cac08ac9c61 100755
--- a/keyboards/molecule/config.h
+++ b/keyboards/molecule/config.h
@@ -38,30 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
-/* underglow LED */
-// #define RGB_DI_PIN D3
-// #ifdef RGBLIGHT_ENABLE
-// # define RGBLED_NUM 10
-// # define RGBLED_SPLIT { 5, 5 }
-// #endif
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
-
/* OLED */
#define OLED_TIMEOUT 0
diff --git a/keyboards/momokai/tap_duo/config.h b/keyboards/momokai/tap_duo/config.h
index 8eab0da68dae..72602fa9582d 100644
--- a/keyboards/momokai/tap_duo/config.h
+++ b/keyboards/momokai/tap_duo/config.h
@@ -61,13 +61,6 @@
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
// #ifdef RGB_DI_PIN
// #define DRIVER_LED_TOTAL 5
diff --git a/keyboards/momokai/tap_trio/config.h b/keyboards/momokai/tap_trio/config.h
index 3def7d79a1e7..4acbcd789aad 100644
--- a/keyboards/momokai/tap_trio/config.h
+++ b/keyboards/momokai/tap_trio/config.h
@@ -45,13 +45,6 @@
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
// #ifdef RGB_DI_PIN
// #define RGB_MATRIX_LED_COUNT 5
diff --git a/keyboards/nacly/sodium42/config.h b/keyboards/nacly/sodium42/config.h
index f6ebf5e06497..c62886f428f4 100644
--- a/keyboards/nacly/sodium42/config.h
+++ b/keyboards/nacly/sodium42/config.h
@@ -38,13 +38,6 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN B1
-/*
-#define RGBLED_NUM 12 // Number of LEDs
-
-#define RGBLED_SPLIT { 6, 6 }
-*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/nacly/sodium50/config.h b/keyboards/nacly/sodium50/config.h
index 0514c78aec7e..f984b56480cd 100644
--- a/keyboards/nacly/sodium50/config.h
+++ b/keyboards/nacly/sodium50/config.h
@@ -38,13 +38,6 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN B1
-/*
-#define RGBLED_NUM 12 // Number of LEDs
-
-#define RGBLED_SPLIT { 6, 6 }
-*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/nacly/sodium62/config.h b/keyboards/nacly/sodium62/config.h
index 112c03a41cca..7c51bd52c4a2 100644
--- a/keyboards/nacly/sodium62/config.h
+++ b/keyboards/nacly/sodium62/config.h
@@ -39,13 +39,6 @@
#define LOCKING_RESYNC_ENABLE
#define OLED_BRIGHTNESS 128
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN B1
-/*
-#define RGBLED_NUM 12 // Number of LEDs
-
-#define RGBLED_SPLIT { 6, 6 }
-*/
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/nacly/ua62/config.h b/keyboards/nacly/ua62/config.h
index 5b3d19798efe..c350c2bfbc20 100644
--- a/keyboards/nacly/ua62/config.h
+++ b/keyboards/nacly/ua62/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/nightly_boards/alter/rev1/config.h b/keyboards/nightly_boards/alter/rev1/config.h
index b545953fa05b..c6fd463ddb27 100644
--- a/keyboards/nightly_boards/alter/rev1/config.h
+++ b/keyboards/nightly_boards/alter/rev1/config.h
@@ -57,12 +57,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/nightly_boards/n2/config.h b/keyboards/nightly_boards/n2/config.h
index 9c754f278bd6..a02f3e4bd68b 100644
--- a/keyboards/nightly_boards/n2/config.h
+++ b/keyboards/nightly_boards/n2/config.h
@@ -53,12 +53,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/nightly_boards/n87/config.h b/keyboards/nightly_boards/n87/config.h
index bbaacce19296..3dffd7407c43 100644
--- a/keyboards/nightly_boards/n87/config.h
+++ b/keyboards/nightly_boards/n87/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#define AUDIO_PIN B7
diff --git a/keyboards/nightly_boards/n9/config.h b/keyboards/nightly_boards/n9/config.h
index 12f9e9715c69..476913647b2f 100644
--- a/keyboards/nightly_boards/n9/config.h
+++ b/keyboards/nightly_boards/n9/config.h
@@ -53,12 +53,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/nightmare/config.h b/keyboards/nightmare/config.h
index 97595c2a7419..3e1e066ceaa5 100644
--- a/keyboards/nightmare/config.h
+++ b/keyboards/nightmare/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/novelkeys/novelpad/config.h b/keyboards/novelkeys/novelpad/config.h
index 8f541ac856f3..36becab78189 100755
--- a/keyboards/novelkeys/novelpad/config.h
+++ b/keyboards/novelkeys/novelpad/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/noxary/260/config.h b/keyboards/noxary/260/config.h
index 4d5da7c8cbb6..8696d18708ee 100644
--- a/keyboards/noxary/260/config.h
+++ b/keyboards/noxary/260/config.h
@@ -45,22 +45,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h
index c34717f09f63..4acc6e10582c 100644
--- a/keyboards/orthodox/rev1/config.h
+++ b/keyboards/orthodox/rev1/config.h
@@ -46,10 +46,6 @@ along with this program. If not, see .
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LGUI)) \
)
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN D3
-//#define RGBLED_NUM 16 // Number of LEDs
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/orthodox/rev3/config.h b/keyboards/orthodox/rev3/config.h
index faedd0cfeede..ffc4b0216896 100644
--- a/keyboards/orthodox/rev3/config.h
+++ b/keyboards/orthodox/rev3/config.h
@@ -49,11 +49,6 @@ along with this program. If not, see .
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LGUI)) \
)
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN D3
-
-//#define RGBLED_NUM 16 // Number of LEDs
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/orthodox/rev3_teensy/config.h b/keyboards/orthodox/rev3_teensy/config.h
index 227b3d21975f..5b2a0298a66d 100644
--- a/keyboards/orthodox/rev3_teensy/config.h
+++ b/keyboards/orthodox/rev3_teensy/config.h
@@ -43,11 +43,6 @@ along with this program. If not, see .
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LGUI)) \
)
-/* ws2812 RGB LED */
-//#define RGB_DI_PIN D3
-
-//#define RGBLED_NUM 16 // Number of LEDs
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/papercranekeyboards/gerald65/config.h b/keyboards/papercranekeyboards/gerald65/config.h
index cb26c0107fa8..8e3c51ea89c0 100644
--- a/keyboards/papercranekeyboards/gerald65/config.h
+++ b/keyboards/papercranekeyboards/gerald65/config.h
@@ -30,31 +30,6 @@
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/pdxkbc/config.h b/keyboards/pdxkbc/config.h
index 22362490429d..b2dba5ba09e0 100644
--- a/keyboards/pdxkbc/config.h
+++ b/keyboards/pdxkbc/config.h
@@ -38,31 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/peranekofactory/tone/rev1/config.h b/keyboards/peranekofactory/tone/rev1/config.h
index edf74052c505..58c014f26aea 100644
--- a/keyboards/peranekofactory/tone/rev1/config.h
+++ b/keyboards/peranekofactory/tone/rev1/config.h
@@ -28,31 +28,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/peranekofactory/tone/rev2/config.h b/keyboards/peranekofactory/tone/rev2/config.h
index 4068b9ed0e36..58c014f26aea 100644
--- a/keyboards/peranekofactory/tone/rev2/config.h
+++ b/keyboards/peranekofactory/tone/rev2/config.h
@@ -28,22 +28,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h
index 95fada2f1c42..d811e2b8b42f 100644
--- a/keyboards/phantom/config.h
+++ b/keyboards/phantom/config.h
@@ -59,12 +59,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/pimentoso/touhoupad/config.h b/keyboards/pimentoso/touhoupad/config.h
index 46f40887dbd2..58cc02d153b3 100644
--- a/keyboards/pimentoso/touhoupad/config.h
+++ b/keyboards/pimentoso/touhoupad/config.h
@@ -36,7 +36,4 @@
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/plume/plume65/config.h b/keyboards/plume/plume65/config.h
index 4fea9905d6b3..842238b23d71 100644
--- a/keyboards/plume/plume65/config.h
+++ b/keyboards/plume/plume65/config.h
@@ -38,7 +38,6 @@
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN B0
-// #ifdef RGB_DI_PIN
#define RGBLED_NUM 10
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
@@ -55,13 +54,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/plut0nium/0x3e/config.h b/keyboards/plut0nium/0x3e/config.h
index 51280153906b..5be87f4d481f 100644
--- a/keyboards/plut0nium/0x3e/config.h
+++ b/keyboards/plut0nium/0x3e/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/plywrks/lune/config.h b/keyboards/plywrks/lune/config.h
index 09262fc71766..3c4dbe054063 100644
--- a/keyboards/plywrks/lune/config.h
+++ b/keyboards/plywrks/lune/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/pohjolaworks/louhi/config.h b/keyboards/pohjolaworks/louhi/config.h
index e2dc8b39e3bf..1baf3a1b3a44 100644
--- a/keyboards/pohjolaworks/louhi/config.h
+++ b/keyboards/pohjolaworks/louhi/config.h
@@ -50,12 +50,6 @@ along with this program. If not, see .
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 230 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/program_yoink/config.h b/keyboards/program_yoink/config.h
index 818492180278..deb8ca028606 100644
--- a/keyboards/program_yoink/config.h
+++ b/keyboards/program_yoink/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#define RGBLIGHT_EFFECT_RGB_TEST
//#define RGBLIGHT_EFFECT_ALTERNATING
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- //#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- //#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- //#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/projectcain/relic/config.h b/keyboards/projectcain/relic/config.h
index ca023cf352b8..b1c394355a36 100644
--- a/keyboards/projectcain/relic/config.h
+++ b/keyboards/projectcain/relic/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/projectcain/vault35/config.h b/keyboards/projectcain/vault35/config.h
index 9cf7024f39b5..93192ba1ba70 100644
--- a/keyboards/projectcain/vault35/config.h
+++ b/keyboards/projectcain/vault35/config.h
@@ -45,22 +45,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/projectcain/vault45/config.h b/keyboards/projectcain/vault45/config.h
index d9d2799d0de2..179d3bb95e87 100644
--- a/keyboards/projectcain/vault45/config.h
+++ b/keyboards/projectcain/vault45/config.h
@@ -48,22 +48,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/prototypist/allison/config.h b/keyboards/prototypist/allison/config.h
index 49094c25166a..992fdda99b87 100644
--- a/keyboards/prototypist/allison/config.h
+++ b/keyboards/prototypist/allison/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 4
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/prototypist/allison_numpad/config.h b/keyboards/prototypist/allison_numpad/config.h
index 7a0d7989ca8d..d4305d3e7400 100644
--- a/keyboards/prototypist/allison_numpad/config.h
+++ b/keyboards/prototypist/allison_numpad/config.h
@@ -42,22 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 4
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/pteron36/config.h b/keyboards/pteron36/config.h
index d10fb93a98d4..aa999ef9d47f 100644
--- a/keyboards/pteron36/config.h
+++ b/keyboards/pteron36/config.h
@@ -49,22 +49,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/qpockets/wanten/config.h b/keyboards/qpockets/wanten/config.h
index 4ece1dd58a61..20062e348421 100644
--- a/keyboards/qpockets/wanten/config.h
+++ b/keyboards/qpockets/wanten/config.h
@@ -45,24 +45,6 @@ along with this program. If not, see .
#define ENCODER_RESOLUTION 4
//#define ENCODER_DIRECTION_FLIP
-/*nothing below here is needed for wanten unless enabling RGB. the correct RGB_DI_PIN is defined, the rest is up to you o7 */
-
-//#define RGB_DI_PIN B0
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
diff --git a/keyboards/quad_h/lb75/config.h b/keyboards/quad_h/lb75/config.h
index cd3d841bda77..daffd21540b4 100644
--- a/keyboards/quad_h/lb75/config.h
+++ b/keyboards/quad_h/lb75/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h
index 30c2b753d4bb..7432874ecc03 100644
--- a/keyboards/quantrik/kyuu/config.h
+++ b/keyboards/quantrik/kyuu/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h
index 77a204a9753d..c82df3863d8c 100644
--- a/keyboards/qwertyydox/config.h
+++ b/keyboards/qwertyydox/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- // /*== customize breathing effect ==*/
- // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- // /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/rabbit/rabbit68/config.h b/keyboards/rabbit/rabbit68/config.h
index b706720e928e..298a0b4d760a 100644
--- a/keyboards/rabbit/rabbit68/config.h
+++ b/keyboards/rabbit/rabbit68/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/rart/rartland/config.h b/keyboards/rart/rartland/config.h
index b71dd5fb8dd0..5bfa892a475f 100644
--- a/keyboards/rart/rartland/config.h
+++ b/keyboards/rart/rartland/config.h
@@ -51,13 +51,3 @@ along with this program. If not, see .
#define LOCKING_RESYNC_ENABLE
#define OLED_TIMEOUT 10000
-
-/* #define RGB_DI_PIN D7 */
-/* #ifdef RGB_DI_PIN */
-/* #define RGBLED_NUM 11 */
-/* #define RGBLIGHT_HUE_STEP 8 */
-/* #define RGBLIGHT_SAT_STEP 8 */
-/* #define RGBLIGHT_VAL_STEP 8 */
-/* #define RGBLIGHT_LIMIT_VAL 240 */
-/* #define RGBLIGHT_SLEEP */
-/* #endif */
diff --git a/keyboards/redscarf_iiplus/verb/config.h b/keyboards/redscarf_iiplus/verb/config.h
index 1b04baf771f0..af28efba480e 100755
--- a/keyboards/redscarf_iiplus/verb/config.h
+++ b/keyboards/redscarf_iiplus/verb/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/redscarf_iiplus/verc/config.h b/keyboards/redscarf_iiplus/verc/config.h
index 1b04baf771f0..af28efba480e 100755
--- a/keyboards/redscarf_iiplus/verc/config.h
+++ b/keyboards/redscarf_iiplus/verc/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/redscarf_iiplus/verd/config.h b/keyboards/redscarf_iiplus/verd/config.h
index 6afbd690a66b..27d02b108f7b 100644
--- a/keyboards/redscarf_iiplus/verd/config.h
+++ b/keyboards/redscarf_iiplus/verd/config.h
@@ -45,22 +45,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/retro_75/config.h b/keyboards/retro_75/config.h
index 8e8840a6f36f..bb3a1b3976d3 100644
--- a/keyboards/retro_75/config.h
+++ b/keyboards/retro_75/config.h
@@ -39,7 +39,6 @@ along with this program. If not, see .
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN A9
-// #ifdef RGB_DI_PIN
#define RGBLED_NUM 18
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
@@ -56,13 +55,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/reviung/reviung33/config.h b/keyboards/reviung/reviung33/config.h
index d8366ad295c0..564412cbee2b 100644
--- a/keyboards/reviung/reviung33/config.h
+++ b/keyboards/reviung/reviung33/config.h
@@ -56,12 +56,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/reviung/reviung34/config.h b/keyboards/reviung/reviung34/config.h
index f0d93ab3bf4f..7cf3531de38c 100755
--- a/keyboards/reviung/reviung34/config.h
+++ b/keyboards/reviung/reviung34/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/reviung/reviung39/config.h b/keyboards/reviung/reviung39/config.h
index 717175d062f3..c266f9cb3e3c 100644
--- a/keyboards/reviung/reviung39/config.h
+++ b/keyboards/reviung/reviung39/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/reviung/reviung39/keymaps/default/config.h b/keyboards/reviung/reviung39/keymaps/default/config.h
index d27f9ee4a8ab..11a0609742a5 100644
--- a/keyboards/reviung/reviung39/keymaps/default/config.h
+++ b/keyboards/reviung/reviung39/keymaps/default/config.h
@@ -36,10 +36,4 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/reviung/reviung39/keymaps/default_s/config.h b/keyboards/reviung/reviung39/keymaps/default_s/config.h
index c1f4031e504b..a18a50837183 100644
--- a/keyboards/reviung/reviung39/keymaps/default_s/config.h
+++ b/keyboards/reviung/reviung39/keymaps/default_s/config.h
@@ -36,10 +36,4 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/reviung/reviung41/config.h b/keyboards/reviung/reviung41/config.h
index 729f5f69a862..6c3f7eeb0ff3 100644
--- a/keyboards/reviung/reviung41/config.h
+++ b/keyboards/reviung/reviung41/config.h
@@ -58,12 +58,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/reviung/reviung5/config.h b/keyboards/reviung/reviung5/config.h
index 7bd09c8aaa66..0194f67a401c 100644
--- a/keyboards/reviung/reviung5/config.h
+++ b/keyboards/reviung/reviung5/config.h
@@ -64,12 +64,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/reviung/reviung53/config.h b/keyboards/reviung/reviung53/config.h
index 15df0d01208f..c205e243696b 100644
--- a/keyboards/reviung/reviung53/config.h
+++ b/keyboards/reviung/reviung53/config.h
@@ -48,12 +48,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/rmi_kb/chevron/config.h b/keyboards/rmi_kb/chevron/config.h
index 624162cff165..5b9123ef05f9 100644
--- a/keyboards/rmi_kb/chevron/config.h
+++ b/keyboards/rmi_kb/chevron/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/rmi_kb/herringbone/v1/config.h b/keyboards/rmi_kb/herringbone/v1/config.h
index 89fbf781d50a..419c33b6790b 100644
--- a/keyboards/rmi_kb/herringbone/v1/config.h
+++ b/keyboards/rmi_kb/herringbone/v1/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/rmi_kb/squishyfrl/config.h b/keyboards/rmi_kb/squishyfrl/config.h
index 041407aed3e7..4997395a45fe 100644
--- a/keyboards/rmi_kb/squishyfrl/config.h
+++ b/keyboards/rmi_kb/squishyfrl/config.h
@@ -62,12 +62,7 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#define RGBLIGHT_EFFECT_TWINKLE
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/rmi_kb/squishytkl/config.h b/keyboards/rmi_kb/squishytkl/config.h
index e46aeea45ad1..8fa3a43667ff 100644
--- a/keyboards/rmi_kb/squishytkl/config.h
+++ b/keyboards/rmi_kb/squishytkl/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/rmi_kb/tkl_ff/config.h b/keyboards/rmi_kb/tkl_ff/config.h
index 4dd0322d7024..2aeec8d58c8a 100644
--- a/keyboards/rmi_kb/tkl_ff/config.h
+++ b/keyboards/rmi_kb/tkl_ff/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/rmi_kb/tkl_ff/v2/config.h b/keyboards/rmi_kb/tkl_ff/v2/config.h
index eb60e5c3115e..dd3984c8692b 100644
--- a/keyboards/rmi_kb/tkl_ff/v2/config.h
+++ b/keyboards/rmi_kb/tkl_ff/v2/config.h
@@ -36,10 +36,4 @@
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
diff --git a/keyboards/rmi_kb/wete/v2/config.h b/keyboards/rmi_kb/wete/v2/config.h
index e719e4f83515..7edcb3f1ea80 100644
--- a/keyboards/rmi_kb/wete/v2/config.h
+++ b/keyboards/rmi_kb/wete/v2/config.h
@@ -68,12 +68,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/rmkeebs/rm_numpad/config.h b/keyboards/rmkeebs/rm_numpad/config.h
index 6f4108d587a2..55426b7a7398 100644
--- a/keyboards/rmkeebs/rm_numpad/config.h
+++ b/keyboards/rmkeebs/rm_numpad/config.h
@@ -50,22 +50,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/roseslite/config.h b/keyboards/roseslite/config.h
index b9a62895855c..6ad74f302a04 100644
--- a/keyboards/roseslite/config.h
+++ b/keyboards/roseslite/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/runes/vaengr/config.h b/keyboards/runes/vaengr/config.h
index 7d109134d28a..81bc45fbf266 100644
--- a/keyboards/runes/vaengr/config.h
+++ b/keyboards/runes/vaengr/config.h
@@ -45,7 +45,6 @@ along with this program. If not, see .
//#define LED_KANA_PIN B4
#define RGB_DI_PIN C7
-// #define RGB_DI_PIN B0
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -63,12 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_VAL_STEP 17
// # define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#define FORCE_NKRO
diff --git a/keyboards/sandwich/keeb68/config.h b/keyboards/sandwich/keeb68/config.h
index ef7874a1b267..c165a6acd459 100644
--- a/keyboards/sandwich/keeb68/config.h
+++ b/keyboards/sandwich/keeb68/config.h
@@ -48,22 +48,6 @@ along with this program. If not, see .
#define BACKLIGHT_LEVELS 5
#define BACKLIGHT_BREATHING
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/scatter42/config.h b/keyboards/scatter42/config.h
index 4722c0a4ec31..97ff28414be0 100644
--- a/keyboards/scatter42/config.h
+++ b/keyboards/scatter42/config.h
@@ -43,22 +43,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sck/m0116b/config.h b/keyboards/sck/m0116b/config.h
index 8f452b7c2420..b949fa21060c 100644
--- a/keyboards/sck/m0116b/config.h
+++ b/keyboards/sck/m0116b/config.h
@@ -38,32 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sck/neiso/config.h b/keyboards/sck/neiso/config.h
index 16715f3e86a5..03d105da09ea 100644
--- a/keyboards/sck/neiso/config.h
+++ b/keyboards/sck/neiso/config.h
@@ -40,22 +40,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 4
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h
index 14fbabb16783..754bdea88d80 100644
--- a/keyboards/sck/osa/config.h
+++ b/keyboards/sck/osa/config.h
@@ -46,12 +46,6 @@ along with this program. If not, see .
#define RGBLIGHT_VAL_STEP 17
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 128 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#define LED_NUM_LOCK_PIN C7
diff --git a/keyboards/sekigon/grs_70ec/config.h b/keyboards/sekigon/grs_70ec/config.h
index 13f11061b914..e2427468863c 100644
--- a/keyboards/sekigon/grs_70ec/config.h
+++ b/keyboards/sekigon/grs_70ec/config.h
@@ -51,22 +51,6 @@ along with this program. If not, see .
#define SOFT_SERIAL_PIN D3 // or D1, D2, D3, E6
#define EE_HANDS
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/shiro/config.h b/keyboards/shiro/config.h
index 925322317366..e0f2629efae9 100644
--- a/keyboards/shiro/config.h
+++ b/keyboards/shiro/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/skeletonkbd/skeletonnumpad/config.h b/keyboards/skeletonkbd/skeletonnumpad/config.h
index 0641287553f3..8e908e9c825a 100644
--- a/keyboards/skeletonkbd/skeletonnumpad/config.h
+++ b/keyboards/skeletonkbd/skeletonnumpad/config.h
@@ -61,12 +61,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/slz40/config.h b/keyboards/slz40/config.h
index 155c8be4818f..d4712d6f19f7 100644
--- a/keyboards/slz40/config.h
+++ b/keyboards/slz40/config.h
@@ -38,22 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h
index 10a8451b8613..29e64d96f2be 100644
--- a/keyboards/smallkeyboard/config.h
+++ b/keyboards/smallkeyboard/config.h
@@ -99,11 +99,3 @@
#define DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 6
#endif
-//#define RGB_DI_PIN B7
-//#ifdef RGB_DI_PIN
-//#define RGBLED_NUM 8
-//#define RGBLIGHT_HUE_STEP 5
-//#define RGBLIGHT_SAT_STEP 5
-//#define RGBLIGHT_VAL_STEP 5
-//#define RGBLIGHT_SLEEP
-//#endif
diff --git a/keyboards/snampad/config.h b/keyboards/snampad/config.h
index 81a7248790d7..9c51fe3ba502 100644
--- a/keyboards/snampad/config.h
+++ b/keyboards/snampad/config.h
@@ -38,16 +38,6 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/soup10/config.h b/keyboards/soup10/config.h
index 79b033359d72..3c7f23d8c771 100644
--- a/keyboards/soup10/config.h
+++ b/keyboards/soup10/config.h
@@ -45,22 +45,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/spacetime/config.h b/keyboards/spacetime/config.h
index ce39cf73bc7c..1d41cef44528 100644
--- a/keyboards/spacetime/config.h
+++ b/keyboards/spacetime/config.h
@@ -43,16 +43,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/spacey/config.h b/keyboards/spacey/config.h
index 340e2cb409a5..ff0786b0bf03 100644
--- a/keyboards/spacey/config.h
+++ b/keyboards/spacey/config.h
@@ -47,19 +47,3 @@ along with this program. If not, see .
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
diff --git a/keyboards/specskeys/config.h b/keyboards/specskeys/config.h
index 9f8c80d663f7..b2c3443487e4 100644
--- a/keyboards/specskeys/config.h
+++ b/keyboards/specskeys/config.h
@@ -46,22 +46,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 1
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/stello65/beta/config.h b/keyboards/stello65/beta/config.h
index bc4be7644a06..45d2047d4a75 100644
--- a/keyboards/stello65/beta/config.h
+++ b/keyboards/stello65/beta/config.h
@@ -42,22 +42,6 @@
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/stello65/hs_rev1/config.h b/keyboards/stello65/hs_rev1/config.h
index 8be05e8310af..5a6e2249c137 100644
--- a/keyboards/stello65/hs_rev1/config.h
+++ b/keyboards/stello65/hs_rev1/config.h
@@ -49,12 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/stello65/sl_rev1/config.h b/keyboards/stello65/sl_rev1/config.h
index 56a3b7e13e9c..7f50b5838b3f 100644
--- a/keyboards/stello65/sl_rev1/config.h
+++ b/keyboards/stello65/sl_rev1/config.h
@@ -49,12 +49,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/stenokeyboards/the_uni/rp_2040/config.h b/keyboards/stenokeyboards/the_uni/rp_2040/config.h
index 0927a059f291..0ff4ade9fb39 100644
--- a/keyboards/stenokeyboards/the_uni/rp_2040/config.h
+++ b/keyboards/stenokeyboards/the_uni/rp_2040/config.h
@@ -31,13 +31,4 @@
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 0
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
-// #endif
-
#define FORCE_NKRO
diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h
index 152950f61e4c..79b0d37f18a5 100644
--- a/keyboards/studiokestra/bourgeau/config.h
+++ b/keyboards/studiokestra/bourgeau/config.h
@@ -47,12 +47,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/studiokestra/cascade/config.h b/keyboards/studiokestra/cascade/config.h
index 1a7bdb48607c..89650f8106c1 100644
--- a/keyboards/studiokestra/cascade/config.h
+++ b/keyboards/studiokestra/cascade/config.h
@@ -46,12 +46,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/studiokestra/galatea/config.h b/keyboards/studiokestra/galatea/config.h
index 540213d55171..ec1725fd6be8 100644
--- a/keyboards/studiokestra/galatea/config.h
+++ b/keyboards/studiokestra/galatea/config.h
@@ -46,12 +46,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/switchplate/southpaw_65/config.h b/keyboards/switchplate/southpaw_65/config.h
index e2f58d6f0ae8..bfd3cb0cc196 100644
--- a/keyboards/switchplate/southpaw_65/config.h
+++ b/keyboards/switchplate/southpaw_65/config.h
@@ -53,14 +53,6 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// #ifdef RGB_DI_PIN
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/synapse/config.h b/keyboards/synapse/config.h
index e3f6a56f8917..f73633296b2b 100644
--- a/keyboards/synapse/config.h
+++ b/keyboards/synapse/config.h
@@ -39,9 +39,3 @@
#define ENCODER_RESOLUTION 4
#define LOCKING_SUPPORT_ENABLE
-
-//#define RGB_DI_PIN D5
-//#define RGBLED_NUM 4
-
-//#define RGB_MATRIX_LED_COUNT RGBLED_NUM
-//#define RGBLIGHT_DEFAULT_HUE 130
diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h
index d82b064cc799..3d9baf7e8f0c 100644
--- a/keyboards/takashicompany/center_enter/config.h
+++ b/keyboards/takashicompany/center_enter/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h
index 4429f106184b..56bc8ccff172 100644
--- a/keyboards/takashicompany/endzone34/config.h
+++ b/keyboards/takashicompany/endzone34/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/takashicompany/minizone/config.h b/keyboards/takashicompany/minizone/config.h
index 4134abbfdcd4..4a66d73747bb 100644
--- a/keyboards/takashicompany/minizone/config.h
+++ b/keyboards/takashicompany/minizone/config.h
@@ -47,12 +47,6 @@
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h
index 2cb1e76c8ac8..84ded6016248 100644
--- a/keyboards/takashicompany/qoolee/config.h
+++ b/keyboards/takashicompany/qoolee/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/takashiski/otaku_split/rev0/config.h b/keyboards/takashiski/otaku_split/rev0/config.h
index 6fa3e0916492..85430f51b49f 100644
--- a/keyboards/takashiski/otaku_split/rev0/config.h
+++ b/keyboards/takashiski/otaku_split/rev0/config.h
@@ -43,22 +43,6 @@ along with this program. If not, see .
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/takashiski/otaku_split/rev1/config.h b/keyboards/takashiski/otaku_split/rev1/config.h
index 12ee7f610a4d..cf287d1732dd 100644
--- a/keyboards/takashiski/otaku_split/rev1/config.h
+++ b/keyboards/takashiski/otaku_split/rev1/config.h
@@ -47,22 +47,6 @@ along with this program. If not, see .
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
#define SPLIT_HAND_PIN D2 //fix pin. HIGH is left, LOW is right
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/tg4x/config.h b/keyboards/tg4x/config.h
index eedd591c2145..c188aa643ca5 100644
--- a/keyboards/tg4x/config.h
+++ b/keyboards/tg4x/config.h
@@ -57,12 +57,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h
index cc1c5ca08c05..284537b41ddd 100644
--- a/keyboards/tkc/m0lly/config.h
+++ b/keyboards/tkc/m0lly/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/tkc/osav2/config.h b/keyboards/tkc/osav2/config.h
index f6b55416d039..c81bd46dc358 100644
--- a/keyboards/tkc/osav2/config.h
+++ b/keyboards/tkc/osav2/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 128 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/tkc/tkl_ab87/config.h b/keyboards/tkc/tkl_ab87/config.h
index 35e4748c43ce..c3a29366947f 100644
--- a/keyboards/tkc/tkl_ab87/config.h
+++ b/keyboards/tkc/tkl_ab87/config.h
@@ -63,12 +63,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#define LED_SCROLL_LOCK_PIN F0
diff --git a/keyboards/treasure/type9/config.h b/keyboards/treasure/type9/config.h
index cb7611ef71ec..90787b974aa3 100644
--- a/keyboards/treasure/type9/config.h
+++ b/keyboards/treasure/type9/config.h
@@ -41,14 +41,6 @@ along with this program. If not, see .
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 10
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/unikeyboard/felix/config.h b/keyboards/unikeyboard/felix/config.h
index 5867cc73b516..b7139f1a3ec3 100644
--- a/keyboards/unikeyboard/felix/config.h
+++ b/keyboards/unikeyboard/felix/config.h
@@ -24,22 +24,6 @@
#define BACKLIGHT_PIN C6
#define BACKLIGHT_LEVELS 5
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/unison/v04/config.h b/keyboards/unison/v04/config.h
index 7b3d144c2521..aa4a75f88e4a 100644
--- a/keyboards/unison/v04/config.h
+++ b/keyboards/unison/v04/config.h
@@ -69,12 +69,6 @@ along with this program. If not, see .
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- // /*== customize breathing effect ==*/
- // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- // /*==== use exp() and sin() ====*/
- // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/uranuma/config.h b/keyboards/uranuma/config.h
index 1f548cb72c6f..167b93e50325 100644
--- a/keyboards/uranuma/config.h
+++ b/keyboards/uranuma/config.h
@@ -21,22 +21,6 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h
index 7672ea482a63..d26ff85dcfcb 100644
--- a/keyboards/v60_type_r/config.h
+++ b/keyboards/v60_type_r/config.h
@@ -42,7 +42,6 @@ along with this program. If not, see .
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_ON_STATE 0
-//#define RGB_DI_PIN 0
#define RGBLED_NUM 1
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/wavtype/foundation/config.h b/keyboards/wavtype/foundation/config.h
index a0950d522639..2822af783ec9 100644
--- a/keyboards/wavtype/foundation/config.h
+++ b/keyboards/wavtype/foundation/config.h
@@ -48,12 +48,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/wavtype/p01_ultra/config.h b/keyboards/wavtype/p01_ultra/config.h
index ccfe5ac21f67..b6b98ca6624f 100644
--- a/keyboards/wavtype/p01_ultra/config.h
+++ b/keyboards/wavtype/p01_ultra/config.h
@@ -62,12 +62,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/wekey/polaris/config.h b/keyboards/wekey/polaris/config.h
index f76bb33db651..1140b508d417 100644
--- a/keyboards/wekey/polaris/config.h
+++ b/keyboards/wekey/polaris/config.h
@@ -44,22 +44,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wekey/we27/config.h b/keyboards/wekey/we27/config.h
index 6b8221fb6999..4aad142a9f3d 100644
--- a/keyboards/wekey/we27/config.h
+++ b/keyboards/wekey/we27/config.h
@@ -123,22 +123,6 @@ along with this program. If not, see .
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h
index a9bd1316df83..e48ce5785df6 100644
--- a/keyboards/work_louder/loop/config.h
+++ b/keyboards/work_louder/loop/config.h
@@ -60,13 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
#define RGBLIGHT_DEFAULT_HUE 36
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
#define RGB_DI_PIN F1
#define RGB_MATRIX_LED_COUNT 9
diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h
index abb6c7675a7d..6fff3c294e6f 100644
--- a/keyboards/work_louder/nano/config.h
+++ b/keyboards/work_louder/nano/config.h
@@ -62,14 +62,6 @@ along with this program. If not, see .
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
#define RGBLIGHT_DEFAULT_HUE 170
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
#define RGB_DI_PIN F6
#define RGB_MATRIX_LED_COUNT 2
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
diff --git a/keyboards/work_louder/numpad/config.h b/keyboards/work_louder/numpad/config.h
index 79ce6df6cf2c..f6a70b90b0ae 100644
--- a/keyboards/work_louder/numpad/config.h
+++ b/keyboards/work_louder/numpad/config.h
@@ -19,8 +19,6 @@
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-// #define RGB_DI_PIN D1
#define RGB_MATRIX_LED_COUNT 16
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
#define RGB_MATRIX_DISABLE_KEYCODES
diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h
index a44e9d0a74b7..bdaa576c2f76 100644
--- a/keyboards/work_louder/work_board/config.h
+++ b/keyboards/work_louder/work_board/config.h
@@ -60,13 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_GRADIENT + 9
#define RGBLIGHT_DEFAULT_HUE 213
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
#define RGB_DI_PIN D1
#define RGB_MATRIX_LED_COUNT 49
diff --git a/keyboards/wsk/houndstooth/config.h b/keyboards/wsk/houndstooth/config.h
index e375d5315aa7..bb256284f9a9 100644
--- a/keyboards/wsk/houndstooth/config.h
+++ b/keyboards/wsk/houndstooth/config.h
@@ -19,9 +19,3 @@
#define LOCKING_RESYNC_ENABLE
#define RGB_DI_PIN F1
-//#ifdef RGB_DI_PIN
-//#define RGBLED_NUM 0
-//#define RGBLIGHT_HUE_STEP 8
-//#define RGBLIGHT_SAT_STEP 8
-//#define RGBLIGHT_VAL_STEP 8
-//#endif
diff --git a/keyboards/x16/config.h b/keyboards/x16/config.h
index 459e8e2e34d6..23d7a0197785 100644
--- a/keyboards/x16/config.h
+++ b/keyboards/x16/config.h
@@ -40,26 +40,6 @@
#define BACKLIGHT_PIN B5
#define BACKLIGHT_LEVELS 5
-// #define RGB_DI_PIN E2
-// #define RGBLED_NUM 4
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/xiudi/xd75/config.h b/keyboards/xiudi/xd75/config.h
index a448302ec057..304ea3620d9b 100644
--- a/keyboards/xiudi/xd75/config.h
+++ b/keyboards/xiudi/xd75/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/xiudi/xd84/config.h b/keyboards/xiudi/xd84/config.h
index f2554f2626ba..6a82f970ff5b 100644
--- a/keyboards/xiudi/xd84/config.h
+++ b/keyboards/xiudi/xd84/config.h
@@ -56,13 +56,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-// #ifdef RGB_DI_PIN
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/xiudi/xd96/config.h b/keyboards/xiudi/xd96/config.h
index ea8822410dfe..d0f6e8965677 100644
--- a/keyboards/xiudi/xd96/config.h
+++ b/keyboards/xiudi/xd96/config.h
@@ -57,13 +57,6 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_LIMIT_VAL 50
-// #ifdef RGB_DI_PIN
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/yiancardesigns/gingham/config.h b/keyboards/yiancardesigns/gingham/config.h
index 43529a069592..cf19c1bb220d 100644
--- a/keyboards/yiancardesigns/gingham/config.h
+++ b/keyboards/yiancardesigns/gingham/config.h
@@ -43,16 +43,6 @@ along with this program. If not, see .
#define USB_MAX_POWER_CONSUMPTION 100
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ymdk/np21/config.h b/keyboards/ymdk/np21/config.h
index 76ce69a915de..6911f4f1031c 100644
--- a/keyboards/ymdk/np21/config.h
+++ b/keyboards/ymdk/np21/config.h
@@ -60,12 +60,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/yoichiro/lunakey_macro/config.h b/keyboards/yoichiro/lunakey_macro/config.h
index e739d3dad28c..3097c836dba1 100644
--- a/keyboards/yoichiro/lunakey_macro/config.h
+++ b/keyboards/yoichiro/lunakey_macro/config.h
@@ -70,12 +70,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/*
diff --git a/keyboards/yoichiro/lunakey_mini/config.h b/keyboards/yoichiro/lunakey_mini/config.h
index 1bcc892d6578..ecd610306e6e 100644
--- a/keyboards/yoichiro/lunakey_mini/config.h
+++ b/keyboards/yoichiro/lunakey_mini/config.h
@@ -65,12 +65,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Audio Support */
diff --git a/keyboards/yushakobo/navpad/10/config.h b/keyboards/yushakobo/navpad/10/config.h
index 8e1fe5124e4c..4a03473d7d09 100644
--- a/keyboards/yushakobo/navpad/10/config.h
+++ b/keyboards/yushakobo/navpad/10/config.h
@@ -41,13 +41,6 @@ along with this program. If not, see .
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
#endif
/* disable action features */
diff --git a/keyboards/yushakobo/navpad/10_helix_r/config.h b/keyboards/yushakobo/navpad/10_helix_r/config.h
index 687ce88e408b..43316dfc3f80 100644
--- a/keyboards/yushakobo/navpad/10_helix_r/config.h
+++ b/keyboards/yushakobo/navpad/10_helix_r/config.h
@@ -80,13 +80,6 @@ along with this program. If not, see .
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
#endif
/* disable action features */
diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h
index a953139e1ecf..45777183a2e8 100644
--- a/keyboards/yushakobo/quick17/config.h
+++ b/keyboards/yushakobo/quick17/config.h
@@ -83,12 +83,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#define RGBLIGHT_LAYERS
#define RGBLIGHT_MAX_LAYERS 8
diff --git a/keyboards/yushakobo/quick7/config.h b/keyboards/yushakobo/quick7/config.h
index 061dfb6dc843..5aaf1891c4d5 100644
--- a/keyboards/yushakobo/quick7/config.h
+++ b/keyboards/yushakobo/quick7/config.h
@@ -37,12 +37,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
-// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */