From 9fdc27626097ae03b767a09427efc90475d90955 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 27 Nov 2017 23:08:21 -0500 Subject: [PATCH] Updates bootloader settings, adds file size check (#2029) * pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title --- bootloader.mk | 62 ++++++ build_keyboard.mk | 5 +- docs/flashing.md | 45 +++- keyboards/atreus/rules.mk | 21 +- keyboards/atreus62/config.h | 2 - keyboards/atreus62/rules.mk | 15 +- keyboards/bfake/config.h | 1 - keyboards/bfake/rules.mk | 7 +- keyboards/bmini/config.h | 1 - keyboards/bmini/rules.mk | 7 +- keyboards/chimera_ortho/rules.mk | 17 +- keyboards/converter/usb_usb/ble/rules.mk | 1 - keyboards/converter/usb_usb/rules.mk | 16 +- keyboards/deltasplit75/rules.mk | 15 +- keyboards/deltasplit75/v2/config.h | 2 - keyboards/dichotemy/rules.mk | 19 +- keyboards/eco/config.h | 2 - keyboards/eco/rules.mk | 15 +- keyboards/ergodox_ez/rules.mk | 15 +- keyboards/gherkin/keymaps/mjt/config.h | 2 - keyboards/gherkin/rules.mk | 11 +- keyboards/handwired/MS_sculpt_mobile/rules.mk | 14 +- keyboards/handwired/reddot/rules.mk | 19 +- keyboards/handwired/space_oddity/config.h | 2 - keyboards/handwired/space_oddity/rules.mk | 11 +- keyboards/handwired/traveller/rules.mk | 10 +- keyboards/handwired/woodpad/config.h | 2 - keyboards/handwired/woodpad/rules.mk | 15 +- keyboards/iris/rev1/config.h | 2 - keyboards/iris/rev2/config.h | 2 - keyboards/iris/rules.mk | 15 +- keyboards/jj40/config.h | 1 - keyboards/jj40/program | 74 ------- keyboards/jj40/rules.mk | 9 +- keyboards/lets_split/rev1/config.h | 3 - keyboards/lets_split/rev2/config.h | 2 - keyboards/lets_split/rules.mk | 15 +- keyboards/lets_split/sockets/config.h | 2 - keyboards/levinson/rev1/config.h | 2 - keyboards/levinson/rev2/config.h | 3 - keyboards/levinson/rules.mk | 15 +- keyboards/mechmini/config.h | 1 - keyboards/mechmini/rules.mk | 7 +- keyboards/minidox/rev1/config.h | 2 - keyboards/minidox/rules.mk | 15 +- keyboards/mitosis/rules.mk | 18 +- keyboards/mt40/config.h | 1 - keyboards/mt40/program | 74 ------- keyboards/mt40/rules.mk | 9 +- keyboards/nyquist/rev1/config.h | 2 - keyboards/nyquist/rules.mk | 15 +- keyboards/orthodox/rev1/config.h | 2 - keyboards/orthodox/rules.mk | 15 +- keyboards/pearl/config.h | 1 - keyboards/pearl/rules.mk | 7 +- keyboards/planck/light/rules.mk | 2 - keyboards/planck/rev3/rules.mk | 9 - keyboards/planck/rev4/rules.mk | 8 - keyboards/planck/rev5/rules.mk | 8 - keyboards/planck/rules.mk | 21 +- keyboards/preonic/rules.mk | 20 +- keyboards/ps2avrGB/config.h | 1 - keyboards/ps2avrGB/rules.mk | 7 +- keyboards/viterbi/rev1/config.h | 2 - keyboards/viterbi/rules.mk | 15 +- keyboards/ymd96/config.h | 1 - keyboards/ymd96/rules.mk | 7 +- .../community/ergodox/jackhumbert/keymap.c | 2 +- message.mk | 8 +- quantum/quantum.c | 3 +- tmk_core/avr.mk | 10 +- tmk_core/common/avr/bootloader.c | 196 ++++++++++-------- tmk_core/common/avr/bootloader_size.c | 20 ++ tmk_core/rules.mk | 23 +- users/drashna/drashna.c | 2 +- users/drashna/template.c | 2 +- 76 files changed, 484 insertions(+), 551 deletions(-) create mode 100644 bootloader.mk delete mode 100755 keyboards/jj40/program delete mode 100755 keyboards/mt40/program create mode 100644 tmk_core/common/avr/bootloader_size.c diff --git a/bootloader.mk b/bootloader.mk new file mode 100644 index 000000000000..55352f3d4265 --- /dev/null +++ b/bootloader.mk @@ -0,0 +1,62 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# Current options: +# atmel-dfu +# lufa-dfu +# qmk-dfu +# halfkay +# caterina +# bootloadHID +# +# BOOTLOADER_SIZE can still be defined manually, but it's recommended +# you add any possible configuration to this list + +ifeq ($(strip $(BOOTLOADER)), atmel-dfu) + OPT_DEFS += -DBOOTLOADER_ATMEL_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), lufa-dfu) + OPT_DEFS += -DBOOTLOADER_LUFA_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), qmk-dfu) + OPT_DEFS += -DBOOTLOADER_QMK_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_SIZE = 512 +endif +ifeq ($(strip $(BOOTLOADER)), caterina) + OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), bootloadHID) + OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_SIZE = 4096 +endif + +ifdef BOOTLOADER_SIZE + OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) +endif \ No newline at end of file diff --git a/build_keyboard.mk b/build_keyboard.mk index df025714dbaf..cbdaaa01043e 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -230,6 +230,7 @@ VPATH += $(USER_PATH) include common_features.mk include $(TMK_PATH)/protocol.mk include $(TMK_PATH)/common.mk +include bootloader.mk SRC += $(TMK_COMMON_SRC) OPT_DEFS += $(TMK_COMMON_DEFS) @@ -266,10 +267,10 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC) $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG) # Default target. -all: build sizeafter +all: build check-size # Change the build target to build a HEX file or a library. -build: elf hex +build: elf cphex #build: elf hex eep lss sym #build: lib diff --git a/docs/flashing.md b/docs/flashing.md index a61634d21540..5b3c1a444790 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -1,12 +1,20 @@ -# Flashing Intrustructions +# Flashing Intrustructions / Bootloader Information There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them. +If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size it bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`. + ## DFU Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by many keyboards that have their own ICs on their PCBs (Older OLKB boards, Clueboards). Some keyboards may also use LUFA's DFU bootloader (or QMK's fork) (Newer OLKB boards) that adds in additional features specific to that hardware. -These bootloaders are usually 4096 bytes for the atmega32u4 chip. +To ensure compatability with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead): + + # Bootloader + # This definition is optional, and if your keyboard supports multiple bootloaders of + # different sizes, comment this out, and the correct address will be loaded + # automatically (+60). See bootloader.mk for all options. + BOOTLOADER = atmel-dfu Compatible flashers: @@ -26,15 +34,32 @@ or: make ::dfu +### QMK DFU + +QMK has a fork of the LUFA DFU bootloader that allows for a simple matrix scan for exiting the bootloader and returning to the application, as well as flashing an LED/making a ticking noise with a speaker when things are happening. To enable these features, use this block in your `config.h` (The key that exits the bootloader needs to be hooked-up to the INPUT and OUTPUT defined here): + + #define QMK_ESC_OUTPUT F1 // usually COL + #define QMK_ESC_INPUT D5 // usually ROW + #define QMK_LED E6 + #define QMK_SPEAKER C6 + +The Manufacturer and Product names are automatically pulled from your `config.h`, and "Bootloader" is added to the product. + +To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:default:bootloader`. + +To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`. + ## Caterina Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina. -This block of code allows for Caterina compatibility in QMK: +To ensure compatability with the Caterina bootloader, make sure this block is present your `rules.mk`: - #define CATERINA_BOOTLOADER - -These bootloaders are usually 4096 bytes for the atmega32u4 chip. + # Bootloader + # This definition is optional, and if your keyboard supports multiple bootloaders of + # different sizes, comment this out, and the correct address will be loaded + # automatically (+60). See bootloader.mk for all options. + BOOTLOADER = caterina Compatible flashers: @@ -57,7 +82,13 @@ or Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0). -This bootloader is 512 bytes. +To ensure compatability with the Halfkay bootloader, make sure this block is present your `rules.mk`: + + # Bootloader + # This definition is optional, and if your keyboard supports multiple bootloaders of + # different sizes, comment this out, and the correct address will be loaded + # automatically (+60). See bootloader.mk for all options. + BOOTLOADER = halfkay Compatible flashers: diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index 0a254d0e7962..2c8418beb710 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -5,7 +5,6 @@ ifdef TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif @@ -27,7 +26,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -47,19 +45,20 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifdef TEENSY2 + BOOTLOADER = halfkay +else + BOOTLOADER = caterina +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h index 90a4aa05a6bd..8d9248947c44 100644 --- a/keyboards/atreus62/config.h +++ b/keyboards/atreus62/config.h @@ -38,8 +38,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk index ca399e9c56f3..66f6660c6ea4 100644 --- a/keyboards/atreus62/rules.mk +++ b/keyboards/atreus62/rules.mk @@ -35,18 +35,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index c52d9175b881..c0e0face5a2b 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -41,7 +41,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index d089858273fe..9165de4248ec 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/bmini/config.h b/keyboards/bmini/config.h index 90b315b7c5d3..b7a25e050e2a 100644 --- a/keyboards/bmini/config.h +++ b/keyboards/bmini/config.h @@ -34,7 +34,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/bmini/rules.mk b/keyboards/bmini/rules.mk index 41a87973d47f..73c361e2a826 100644 --- a/keyboards/bmini/rules.mk +++ b/keyboards/bmini/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index 098bf28fa5c6..4f95949f9fb1 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -45,19 +44,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index c951780e2092..16090962d9b8 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -1,4 +1,3 @@ BLUETOOTH = AdafruitBLE ADAFRUIT_BLE_ENABLE = yes -OPT_DEFS += -DCATERINA_BOOTLOADER F_CPU = 8000000 diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk index b0e07c76491e..7a8f24bb49ab 100644 --- a/keyboards/converter/usb_usb/rules.mk +++ b/keyboards/converter/usb_usb/rules.mk @@ -43,19 +43,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk index e345d61f564a..2a13dbdfc68e 100644 --- a/keyboards/deltasplit75/rules.mk +++ b/keyboards/deltasplit75/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h index b677d09aa952..319a149fbc8b 100644 --- a/keyboards/deltasplit75/v2/config.h +++ b/keyboards/deltasplit75/v2/config.h @@ -37,8 +37,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } #define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/dichotemy/rules.mk b/keyboards/dichotemy/rules.mk index c8a316f84324..4e9db86875a2 100644 --- a/keyboards/dichotemy/rules.mk +++ b/keyboards/dichotemy/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DDICHOTEMY_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -25,8 +24,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - -# # LUFA specific # # Target architecture (see library "Board Types" documentation). @@ -45,19 +42,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h index 99b057496fcb..f6b78631ea02 100644 --- a/keyboards/eco/config.h +++ b/keyboards/eco/config.h @@ -31,8 +31,6 @@ along with this program. If not, see . #define MATRIX_ROWS 4 #define MATRIX_COLS 14 -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk index 6f4b4fefc4ee..35ee906b1e80 100644 --- a/keyboards/eco/rules.mk +++ b/keyboards/eco/rules.mk @@ -34,18 +34,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk index 3d6b18fea927..4d2c461085b7 100644 --- a/keyboards/ergodox_ez/rules.mk +++ b/keyboards/ergodox_ez/rules.mk @@ -54,18 +54,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = halfkay + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - # If you have Left LEDs (see # https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for # details), include the following define: diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h index 9c9f0383897a..bb59ec213d5f 100644 --- a/keyboards/gherkin/keymaps/mjt/config.h +++ b/keyboards/gherkin/keymaps/mjt/config.h @@ -52,8 +52,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } -#define CATERINA_BOOTLOADER - #define UNUSED_PINS /* COL2ROW or ROW2COL */ diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk index 6bb9edb35abe..530898bd788e 100644 --- a/keyboards/gherkin/rules.mk +++ b/keyboards/gherkin/rules.mk @@ -33,14 +33,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/handwired/MS_sculpt_mobile/rules.mk b/keyboards/handwired/MS_sculpt_mobile/rules.mk index 53769f81f40d..680c057d3617 100644 --- a/keyboards/handwired/MS_sculpt_mobile/rules.mk +++ b/keyboards/handwired/MS_sculpt_mobile/rules.mk @@ -5,21 +5,29 @@ SRC= babblePaste.c ifdef ASTAR CFLAGS=-D ASTAR - OPT_DEFS += -DBOOTLOADER_SIZE=4096 MCU = atmega32u4 - OPT_DEFS += -DCATERINA_BOOTLOADER SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) else MCU = at90usb1286 - OPT_DEFS += -DBOOTLOADER_SIZE=2048 SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex endif F_CPU = 16000000 ARCH = AVR8 F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifdef ASTAR + BOOTLOADER = caterina +else + BOOTLOADER = atmel-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index 492996841031..00ca06dd40ec 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -36,30 +36,25 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) - +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. ifdef TEENSY2 + BOOTLOADER = halfkay OPT_DEFS += -DATREUS_TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else + BOOTLOADER = caterina OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# MCU name - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change yes to no to disable diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h index 88cc5ad00e95..9c9361ced7bd 100644 --- a/keyboards/handwired/space_oddity/config.h +++ b/keyboards/handwired/space_oddity/config.h @@ -11,8 +11,6 @@ #define PRODUCT Space Odyssey #define DESCRIPTION Keyboard -#define CATERINA_BOOTLOADER - #define MOUSEKEY_INTERVAL 16 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 60 diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index 170c64a30ec8..4dc93fad9e32 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -33,14 +33,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk index 62f94b945219..8568def3542c 100644 --- a/keyboards/handwired/traveller/rules.mk +++ b/keyboards/handwired/traveller/rules.mk @@ -37,15 +37,23 @@ ARCH = AVR8 F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. ifdef TEENSY2 + BOOTLOADER = halfkay OPT_DEFS += -DATREUS_TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else + BOOTLOADER = caterina OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif + + + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 39a466850e9c..b2eb7020fc49 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -53,8 +53,6 @@ along with this program. If not, see . // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 -#define CATERINA_BOOTLOADER - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 diff --git a/keyboards/handwired/woodpad/rules.mk b/keyboards/handwired/woodpad/rules.mk index 7612f4b49c1c..11f096581e58 100644 --- a/keyboards/handwired/woodpad/rules.mk +++ b/keyboards/handwired/woodpad/rules.mk @@ -35,19 +35,16 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/iris/rev1/config.h b/keyboards/iris/rev1/config.h index 10f435a4fc9f..c9bc6252896b 100644 --- a/keyboards/iris/rev1/config.h +++ b/keyboards/iris/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/iris/rev2/config.h b/keyboards/iris/rev2/config.h index 4ba21a58a6dd..290fba45026b 100644 --- a/keyboards/iris/rev2/config.h +++ b/keyboards/iris/rev2/config.h @@ -37,8 +37,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/iris/rules.mk b/keyboards/iris/rules.mk index 0280e9d1a628..db4bf3a1e438 100644 --- a/keyboards/iris/rules.mk +++ b/keyboards/iris/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 42a37c957f8b..02339a33f7be 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -38,7 +38,6 @@ along with this program. If not, see . #define TAPPING_TOGGLE 3 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/jj40/program b/keyboards/jj40/program deleted file mode 100755 index 81552c27232d..000000000000 --- a/keyboards/jj40/program +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/env python -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -from __future__ import print_function - -import os -import sys -import time -import usb - -if len(sys.argv) < 2: - print('Usage: %s ' % sys.argv[0]) - sys.exit(1) - -print('Searching for jj40... ', end='') - -dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D) -if dev is None: - raise ValueError('Device not found') - -print('Found', end='\n\n') - -print('Device Information:') -print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) -print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) -print('Manufacturer: %s' % (dev.iManufacturer)) -print('Serial: %s' % (dev.iSerialNumber)) -print('Product: %s' % (dev.iProduct), end='\n\n') - -print('Transferring control to bootloader... ', end='') - -dev.set_configuration() - -request_type = usb.util.build_request_type( - usb.util.CTRL_OUT, - usb.util.CTRL_TYPE_CLASS, - usb.util.CTRL_RECIPIENT_DEVICE) - -USBRQ_HID_SET_REPORT = 0x09 -HID_REPORT_OPTION = 0x0301 - - -try: - dev.ctrl_transfer( - request_type, - USBRQ_HID_SET_REPORT, - HID_REPORT_OPTION, - 0, - [0, 0, 0xFF] + [0] * 5 - ) -except usb.core.USBError: - # for some reason I keep getting USBError, but it works! - pass - -# wait a bit until bootloader starts up -time.sleep(2) - -print('OK') -print('Programming...') -if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0: - print('\nDone!') diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index c39ebf222539..c6279a2a5140 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no @@ -39,11 +45,10 @@ KEY_LOCK_ENABLE = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c # programming options -PROGRAM_CMD = ./keyboards/jj40/program $(TARGET).hex +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index 7c128421dd81..73f90e715dfe 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -39,9 +39,6 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } // #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index 1f0603d501e7..1c48f38e05c1 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -39,8 +39,6 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 1bbc0367fa24..f9dc127bc6d1 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -40,18 +40,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 0543e8930d29..70ebcb8c231f 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -39,8 +39,6 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6} // #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rev1/config.h b/keyboards/levinson/rev1/config.h index 7c8b9b0b92d5..ddccbc47a90d 100644 --- a/keyboards/levinson/rev1/config.h +++ b/keyboards/levinson/rev1/config.h @@ -38,8 +38,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D7, E6, B4, B5 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rev2/config.h b/keyboards/levinson/rev2/config.h index 27d451a3b285..51ae5cd3c7c4 100644 --- a/keyboards/levinson/rev2/config.h +++ b/keyboards/levinson/rev2/config.h @@ -38,9 +38,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D4, D7, E6, B4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } - -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rules.mk b/keyboards/levinson/rules.mk index 0ca19e9a004d..8e67497f4b7b 100644 --- a/keyboards/levinson/rules.mk +++ b/keyboards/levinson/rules.mk @@ -40,18 +40,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/mechmini/config.h b/keyboards/mechmini/config.h index 96f4bb51e436..e7004608e11b 100644 --- a/keyboards/mechmini/config.h +++ b/keyboards/mechmini/config.h @@ -35,7 +35,6 @@ along with this program. If not, see . #define RGB_DI_PIN E2 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/mechmini/rules.mk b/keyboards/mechmini/rules.mk index d089858273fe..ed55ae1c43c2 100644 --- a/keyboards/mechmini/rules.mk +++ b/keyboards/mechmini/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h index 9799c41994a0..b7272bdb05cb 100644 --- a/keyboards/minidox/rev1/config.h +++ b/keyboards/minidox/rev1/config.h @@ -26,8 +26,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { B2, B6, B4, B5 } #define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } -#define CATERINA_BOOTLOADER - #define USE_SERIAL //#define EE_HANDS diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk index 0f9d303105a2..0c3a03bd73c3 100644 --- a/keyboards/minidox/rules.mk +++ b/keyboards/minidox/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk index 903edb10929e..0db144ed32c7 100644 --- a/keyboards/mitosis/rules.mk +++ b/keyboards/mitosis/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DMITOSIS_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -25,7 +24,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -45,19 +43,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index 394cc789810c..6c82b2c74f45 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -44,7 +44,6 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 18 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 #define TAPPING_TERM 200 diff --git a/keyboards/mt40/program b/keyboards/mt40/program deleted file mode 100755 index e8786f566d90..000000000000 --- a/keyboards/mt40/program +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/env python2.7 -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -from __future__ import print_function - -import os -import sys -import time -import usb - -if len(sys.argv) < 2: - print('Usage: %s ' % sys.argv[0]) - sys.exit(1) - -print('Searching for planck clone keyboard... ', end='') - -dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D) -if dev is None: - raise ValueError('Device not found') - -print('Found', end='\n\n') - -print('Device Information:') -print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) -print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) -print('Manufacturer: %s' % (dev.iManufacturer)) -print('Serial: %s' % (dev.iSerialNumber)) -print('Product: %s' % (dev.iProduct), end='\n\n') - -print('Transferring control to bootloader... ', end='') - -dev.set_configuration() - -request_type = usb.util.build_request_type( - usb.util.CTRL_OUT, - usb.util.CTRL_TYPE_CLASS, - usb.util.CTRL_RECIPIENT_DEVICE) - -USBRQ_HID_SET_REPORT = 0x09 -HID_REPORT_OPTION = 0x0301 - - -try: - dev.ctrl_transfer( - request_type, - USBRQ_HID_SET_REPORT, - HID_REPORT_OPTION, - 0, - [0, 0, 0xFF] + [0] * 5 - ) -except usb.core.USBError: - # for some reason I keep getting USBError, but it works! - pass - -# wait a bit until bootloader starts up -time.sleep(2) - -print('OK') -print('Programming...') -if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0: - print('\nDone!') diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 10023da0eeb0..9d230d238898 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -9,6 +9,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) @@ -26,11 +32,10 @@ RGBLIGHT_CUSTOM_DRIVER = yes TAP_DANCE_ENABLE = no OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c # programming options -PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/nyquist/rev1/config.h b/keyboards/nyquist/rev1/config.h index 361576887138..4430f254cb56 100644 --- a/keyboards/nyquist/rev1/config.h +++ b/keyboards/nyquist/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk index f2bc59cc5d17..971cd188a8e0 100644 --- a/keyboards/nyquist/rules.mk +++ b/keyboards/nyquist/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index 26715f409639..d6564f281c96 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -51,8 +51,6 @@ along with this program. If not, see . #define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 } /*/ -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index 48d6551bc794..d7ea0d49dc8a 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 99a93ee79813..47a732f7680b 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -27,7 +27,6 @@ along with this program. If not, see . #define DESCRIPTION 40% keyboard #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index d089858273fe..9165de4248ec 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index 02c39c43a08e..1225a5d28dd9 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -4,6 +4,4 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700) NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -OPT_DEFS += -DBOOTLOADER_SIZE=8192 - MCU = at90usb1286 \ No newline at end of file diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk index 9ecde59583a9..e51af55c6686 100644 --- a/keyboards/planck/rev3/rules.mk +++ b/keyboards/planck/rev3/rules.mk @@ -1,10 +1 @@ - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk index 0001fb50f71d..7e64e7edc4f5 100644 --- a/keyboards/planck/rev4/rules.mk +++ b/keyboards/planck/rev4/rules.mk @@ -1,9 +1 @@ -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk index 29eae4b4950c..3b22e0a01b69 100644 --- a/keyboards/planck/rev5/rules.mk +++ b/keyboards/planck/rev5/rules.mk @@ -1,9 +1 @@ -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = yes # Audio output on port C6 \ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 1fed5fa58a96..439f7db6456e 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -34,6 +34,23 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifeq ($(strip $(KEYBOARD)), planck/rev3) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/rev4) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/rev5) + BOOTLOADER = qmk-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/light) + BOOTLOADER = qmk-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT @@ -46,9 +63,9 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = yes # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index acef4d97135f..60087e97857f 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -36,18 +36,20 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifeq ($(strip $(KEYBOARD)), preonic/rev1) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), preonic/rev2) + BOOTLOADER = qmk-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h index 57ec98519342..f62de1653aa8 100644 --- a/keyboards/ps2avrGB/config.h +++ b/keyboards/ps2avrGB/config.h @@ -27,7 +27,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk index 9e76993c4a50..c7c12dcf17e6 100644 --- a/keyboards/ps2avrGB/rules.mk +++ b/keyboards/ps2avrGB/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/viterbi/rev1/config.h b/keyboards/viterbi/rev1/config.h index 68ca5f362625..3400ea31a1a2 100644 --- a/keyboards/viterbi/rev1/config.h +++ b/keyboards/viterbi/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see . #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/viterbi/rules.mk b/keyboards/viterbi/rules.mk index 8a1b94013e38..1f77c637418c 100644 --- a/keyboards/viterbi/rules.mk +++ b/keyboards/viterbi/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index cdc403d5e2b5..e0a2aa138329 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -35,7 +35,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk index 9e76993c4a50..c7c12dcf17e6 100644 --- a/keyboards/ymd96/rules.mk +++ b/keyboards/ymd96/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/layouts/community/ergodox/jackhumbert/keymap.c b/layouts/community/ergodox/jackhumbert/keymap.c index 6a00ffa29334..634e4a0ceea4 100644 --- a/layouts/community/ergodox/jackhumbert/keymap.c +++ b/layouts/community/ergodox/jackhumbert/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_SPC,KC_END, // right hand - KC_NO, M(1), KC_7, KC_8, KC_9, KC_0, KC_NO, + KC_NO, M(1), RESET, KC_8, KC_9, KC_0, KC_NO, KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT, KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, diff --git a/message.mk b/message.mk index 0548fe174cb0..7c832b292713 100644 --- a/message.mk +++ b/message.mk @@ -43,9 +43,9 @@ MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: +MSG_FLASH = Creating load file for flashing: MSG_EEPROM = Creating load file for EEPROM: -MSG_BIN = Creating binary load file for Flash: +MSG_BIN = Creating binary load file for flashing: MSG_EXTENDED_LISTING = Creating Extended Listing: MSG_SYMBOL_TABLE = Creating Symbol Table: MSG_LINKING = Linking: @@ -76,3 +76,7 @@ define GENERATE_MSG_MAKE_TEST endef MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL) MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR) +MSG_CHECK_FILESIZE = Checking file size of $(TARGET).hex +MSG_FILE_TOO_BIG = $(ERROR_COLOR)Your file is too big!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE)\n +MSG_FILE_TOO_SMALL = Your file is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n +MSG_FILE_JUST_RIGHT = File size is fine - $(CURRENT_SIZE)/$(MAX_SIZE)\n diff --git a/quantum/quantum.c b/quantum/quantum.c index 09920159660f..9232cf4411ed 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -143,7 +143,8 @@ void reset_keyboard(void) { #else wait_ms(250); #endif -#ifdef CATERINA_BOOTLOADER +// this is also done later in bootloader.c - not sure if it's neccesary here +#ifdef BOOTLOADER_CATERINA *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific #endif bootloader_jump(); diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 94e9a7bdbb06..c083f6b72d6c 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -121,22 +121,22 @@ qmk: $(BUILD_DIR)/$(TARGET).hex printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk # Program the device. -program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep +program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size $(PROGRAM_CMD) -teensy: $(BUILD_DIR)/$(TARGET).hex +teensy: $(BUILD_DIR)/$(TARGET).hex check-size $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex BATCHISP ?= batchisp -flip: $(BUILD_DIR)/$(TARGET).hex +flip: $(BUILD_DIR)/$(TARGET).hex check-size $(BATCHISP) -hardware usb -device $(MCU) -operation erase f $(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0 DFU_PROGRAMMER ?= dfu-programmer -dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter +dfu: $(BUILD_DIR)/$(TARGET).hex check-size until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\ echo "Error: Bootloader not found. Trying again in 5s." ;\ sleep 5 ;\ @@ -168,7 +168,7 @@ dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep fi $(DFU_PROGRAMMER) $(MCU) reset -avrdude: $(BUILD_DIR)/$(TARGET).hex +avrdude: $(BUILD_DIR)/$(TARGET).hex check-size if grep -q -s Microsoft /proc/version; then \ echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \ else \ diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index 34db8d0b0aa6..ee150817c36f 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -6,6 +6,7 @@ #include #include #include "bootloader.h" +#include #ifdef PROTOCOL_LUFA #include @@ -56,14 +57,17 @@ * | Bootloader | 512B | Bootloader | 1KB * 0x7FFF +---------------+ 0x1FFFF +---------------+ */ -#ifndef BOOTLOADER_SIZE -#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h. -#define BOOTLOADER_SIZE 4096 -#endif -#define FLASH_SIZE (FLASHEND + 1L) -#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE) +#define FLASH_SIZE (FLASHEND + 1L) + +#if !defined(BOOTLOADER_SIZE) + uint16_t bootloader_start; +#endif +#define BOOT_SIZE_256 0b110 +#define BOOT_SIZE_512 0b100 +#define BOOT_SIZE_1024 0b010 +#define BOOT_SIZE_2048 0b000 /* * Entering the Bootloader via Software @@ -74,34 +78,62 @@ uint32_t reset_key __attribute__ ((section (".noinit"))); /* initialize MCU status by watchdog reset */ void bootloader_jump(void) { - #ifndef CATERINA_BOOTLOADER - - #ifdef PROTOCOL_LUFA - USB_Disable(); - cli(); - _delay_ms(2000); - #endif - - #ifdef PROTOCOL_PJRC - cli(); - UDCON = 1; - USBCON = (1<> 1; + } else if (high_fuse & BOOT_SIZE_512) { + bootloader_start = (FLASH_SIZE - 1024) >> 1; + } else if (high_fuse & BOOT_SIZE_1024) { + bootloader_start = (FLASH_SIZE - 2048) >> 1; + } else { + bootloader_start = (FLASH_SIZE - 4096) >> 1; + } + #endif - #else + // Something like this might work, but it compiled larger than the block above + // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1)); + + + #if defined(BOOTLOADER_HALFKAY) + // http://www.pjrc.com/teensy/jump_to_bootloader.html + cli(); + // disable watchdog, if enabled (it's not) + // disable all peripherals + // a shutdown call might make sense here + UDCON = 1; + USBCON = (1<> 1))(); + #else + asm("ijmp" :: "z" (bootloader_start)); + #endif + } + #endif } #if 0 -/* Jumping To The Bootloader - * http://www.pjrc.com/teensy/jump_to_bootloader.html - * - * This method doen't work when using LUFA. idk why. - * - needs to initialize more regisers or interrupt setting? - */ -void bootloader_jump(void) { -#ifdef PROTOCOL_LUFA - USB_Disable(); - cli(); - _delay_ms(2000); -#endif - -#ifdef PROTOCOL_PJRC - cli(); - UDCON = 1; - USBCON = (1<. + +#include +#include + +// this is not valid C - it's for computing the size available on the chip +AVR_SIZE: FLASHEND + 1 - BOOTLOADER_SIZE \ No newline at end of file diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 53e79ef47a57..920a7f6add8c 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -216,6 +216,9 @@ MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@) elf: $(BUILD_DIR)/$(TARGET).elf hex: $(BUILD_DIR)/$(TARGET).hex +cphex: hex + $(SILENT) || printf "Copying $(TARGET).hex to qmk_firmware folder" | $(AWK_CMD) + $(COPY) $(BUILD_DIR)/$(TARGET).hex $(TARGET).hex && $(PRINT_OK) eep: $(BUILD_DIR)/$(TARGET).eep lss: $(BUILD_DIR)/$(TARGET).lss sym: $(BUILD_DIR)/$(TARGET).sym @@ -223,19 +226,17 @@ LIBNAME=lib$(TARGET).a lib: $(LIBNAME) # Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex #ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf sizebefore: - @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \ + @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \ 2>/dev/null; $(SECHO); fi sizeafter: $(BUILD_DIR)/$(TARGET).hex - @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \ + @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \ 2>/dev/null; $(SECHO); fi - # test file sizes eventually - # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi # Display compiler version information. gccversion : @@ -249,8 +250,6 @@ gccversion : @if $(AUTOGEN); then \ $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(TARGET).hex\n"; \ $(COPY) $@ $(KEYMAP_PATH)/$(TARGET).hex; \ - else \ - $(COPY) $@ $(TARGET).hex; \ fi %.eep: %.elf @@ -371,6 +370,14 @@ show_path: @echo SRC=$(SRC) @echo OBJ=$(OBJ) +check-size: + $(eval MAX_SIZE=$(shell n=`avr-gcc -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | grep -oP "(?<=AVR_SIZE: ).+"`; echo $$(($$n)) || echo 0)) + $(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi)) + if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \ + $(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \ + if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then $(PRINT_WARNING_PLAIN); $(SILENT) || printf " * $(MSG_FILE_TOO_BIG)" ; else $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; fi \ + fi + # Create build directory $(shell mkdir -p $(BUILD_DIR) 2>/dev/null) @@ -385,4 +392,4 @@ $(eval $(foreach OUTPUT,$(OUTPUTS),$(shell mkdir -p $(OUTPUT) 2>/dev/null))) .PHONY : all finish sizebefore sizeafter qmkversion \ gccversion build elf hex eep lss sym coff extcoff \ clean clean_list debug gdb-config show_path \ -program teensy dfu flip dfu-ee flip-ee dfu-start +program teensy dfu flip dfu-ee flip-ee dfu-start \ No newline at end of file diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c index 31f58a430cea..1bf029163c97 100644 --- a/users/drashna/drashna.c +++ b/users/drashna/drashna.c @@ -428,7 +428,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case KC_MAKE: if (!record->event.pressed) { SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP); -#ifndef CATERINA_BOOTLOADER +#ifndef BOOTLOADER_CATERINA SEND_STRING(":teensy "); #else SEND_STRING(" "); diff --git a/users/drashna/template.c b/users/drashna/template.c index 027c780e9561..f377d64f7a4f 100644 --- a/users/drashna/template.c +++ b/users/drashna/template.c @@ -43,7 +43,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case KC_MAKE: if (!record->event.pressed) { SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP); -#ifndef CATERINA_BOOTLOADER +#ifndef BOOTLOADER_CATERINA SEND_STRING(":teensy "); #else SEND_STRING(" ");