diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index a69c277d4e54..f6ab8cdc76c8 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -132,22 +132,22 @@ To enable this method, add the following to your `config.h` file:
 #define EE_HANDS
 ```
 
-Next, you will have to flash the EEPROM files once for the correct hand to the controller on each halve. You can do this manually with the following bootloader targets using `make <keyboard>:<keymap>:<bootloader>` command to flash:
+Next, you will have to flash the EEPROM files once for the correct hand to the controller on each halve. You can do this manually with the following bootloader targets using `qmk flash -kb <keyboard> -km <keymap> -bl <bootloader>` command to flash:
 
 |Microcontroller Type|Bootloader Parameter|
 |--------------------|--------------------|
-|AVR controllers with Caterina bootloader<br>(e.g. Pro Micro)|`:avrdude-split-left`<br>`:avrdude-split-right`|
-|AVR controllers with the stock Amtel DFU or DFU compatible bootloader<br>(e.g. Elite-C)|`:dfu-split-left`<br>`:dfu-split-right`|
-|ARM controllers with a DFU compatible bootloader<br>(e.g. Proton-C)|`:dfu-util-split-left`<br>`dfu-util-split-right`|
-|ARM controllers with a UF2 compatible bootloader<br>(e.g. RP2040)|`:uf2-split-left`<br>`:uf2-split-right`|
+|AVR controllers with Caterina bootloader<br>(e.g. Pro Micro)|`avrdude-split-left`<br>`avrdude-split-right`|
+|AVR controllers with the stock Amtel DFU or DFU compatible bootloader<br>(e.g. Elite-C)|`dfu-split-left`<br>`dfu-split-right`|
+|ARM controllers with a DFU compatible bootloader<br>(e.g. Proton-C)|`dfu-util-split-left`<br>`dfu-util-split-right`|
+|ARM controllers with a UF2 compatible bootloader<br>(e.g. RP2040)|`uf2-split-left`<br>`uf2-split-right`|
 
 Example for `crkbd/rev1` keyboard with normal AVR Pro Micro MCUs, reset the left controller and run:
 ```
-make crkbd/rev1:default:avrdude-split-left
+qmk flash -kb crkbd/rev1 -km default -bl avrdude-split-left
 ```
 Reset the right controller and run:
 ```
-make crkbd/rev1:default:avrdude-split-right
+qmk flash -kb crkbd/rev1 -km default -bl avrdude-split-right
 ```
 
 ?> ARM controllers using `dfu-util` will require an EEPROM reset after setting handedness. This can be done using the `EE_CLR` keycode or [Bootmagic Lite](feature_bootmagic.md). Controllers using emulated EEPROM will always require handedness parameter when flashing the firmware.