Pipenv failed to build wheels (PEP 517) #4576
Labels
Status: Awaiting Update ⏳
This issue requires more information before assistance can be provided.
Status: Needs More Information
This issue does not provide enough information to take further action.
Comments
|
Can you install it via |
frostming
added
Status: Awaiting Update ⏳
doing so produces the same error stated above, whose complete stacktrace is Looking around some more on the internet I managed to make it work by means of the mysterious and obscure command
What then exactly is the solution to the problem? More generally, is |
|
Can you show the full error message of
Yes, it does the trick by pretending the OS version to be |
the output is and similar (mutatis mutandis) for a lot more of other packages (numpy, scikit and so forth). |
|
There is no error message about the failure. |
This gives the output that I stated in my initial comment, namely after a long unreadable stacktrace which I deem at this point not very useful to share (similar to the above for pandas). It seems then that there is no current alignment among For the moment I will use the workaround provided by |
|
Is there a fix for this? I tried ########### CLIB COMPILER OPTIMIZATION ########### CPU baseline : CPU dispatch :
|
No permanent fix yet (that I know of), but the workaround works fine for now. I've been watching this issue. What error are you getting? Are you getting an error when running the |
|
Yes with |
Weird, that shouldn't happen. I would completely destroy your environment and Pipfiles (if suitable) and rebuild from scratch. Note that when you run |
|
Thank you for the response. Yes, I use the same terminal. Were you able to install pandas in addition to numpy? |
Yup |
|
I could not get pipenv to install numpy and pandas so I ended using miniforge. I am a big fan of pipenv and would love to see this issue addressed. Thank you for the great work! |
|
The same happened to me after updating pipenv, can't install spicy, numpy or pandas atleast |
|
And locking doensn't work anymore, on newest osx |
|
I'm not understanding why y'all can't use the workaround. At least post up the error your getting |
|
Below is what I get after I do % export SYSTEM_VERSION_COMPAT=1 and % pipenv install pandas (base) foooooo@m1 test % export SYSTEM_VERSION_COMPAT=1 ✔ Successfully created virtual environment! Error: An error occurred while installing pandas! During handling of the above exception, another exception occurred: Traceback (most recent call last): ✔ Successfully created virtual environment! ERROR: Command errored out with exit status 1: |
|
The workaround has worked for me on MacOS 11.2.3 which I have just installed/updated to. |
|
I taught a pandas related MOOC last week, where I guided more than 75 students through installation with pipenv. This error, which was entirely new to me, was encountered by numerous members of the class. Thank you to everyone working on a fix. I can assure it will be appreciated by many. |
I'm on 11.2 with ARM64 and the workaround does NOT work here.
|
|
Is anyone from the Pipenv team looking into this? I suppose by now there is enough evidence that this needs urgent fix: not to put on some more fire but this is becoming concerning. |
|
I have the exact same issues, can't pipenv install pandas, numpy and some other packages. |
|
@gennaro-tedesco @KassiusKlay @palewire Can you kindly test the master branch to see if this issue still exists? |
This is the error i get after running pipenv install numpy ERROR: Could not build wheels for numpy which use PEP 517 and cannot be installed directly |
|
I ran into wheel discovery issues with vanilla I followed advice here, which suggested upgrading After upgrading However, running |
|
I am running into the same issues. Can't install pandas using pipenv. I get the following: > pipenv run pip install --no-use-pep517 pandas
Loading .env environment variables...
Collecting pandas
Downloading pandas-1.2.4.tar.gz (5.5 MB)
|████████████████████████████████| 5.5 MB 873 kB/s
ERROR: Command errored out with exit status 1:
command: /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/pandas_fecb06468ee1462a8010f89dc0c5b2bd/setup.py'"'"'; __file__='"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/pandas_fecb06468ee1462a8010f89dc0c5b2bd/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-pip-egg-info-3f6hcjq1
cwd: /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/pandas_fecb06468ee1462a8010f89dc0c5b2bd/
Complete output (5 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/pandas_fecb06468ee1462a8010f89dc0c5b2bd/setup.py", line 20, in <module>
import numpy
ModuleNotFoundError: No module named 'numpy'
----------------------------------------
WARNING: Discarding https://files.pythonhosted.org/packages/e8/81/f7be049fe887865200a0450b137f2c574647b9154503865502cfd720ab5d/pandas-1.2.4.tar.gz#sha256=649ecab692fade3cbfcf967ff936496b0cfba0af00a55dfaacd82bdda5cb2279 (from https://pypi.org/simple/pandas/) (requires-python:>=3.7.1). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
Using cached pandas-1.2.3-cp39-cp39-macosx_11_0_arm64.whl
Collecting python-dateutil>=2.7.3
Using cached python_dateutil-2.8.1-py2.py3-none-any.whl (227 kB)
Collecting pytz>=2017.3
Using cached pytz-2021.1-py2.py3-none-any.whl (510 kB)
Collecting numpy>=1.16.5
Downloading numpy-1.20.2.zip (7.8 MB)
|████████████████████████████████| 7.8 MB 51.6 MB/s
Requirement already satisfied: six>=1.5 in /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/lib/python3.9/site-packages (from python-dateutil>=2.7.3->pandas) (1.15.0)
Building wheels for collected packages: numpy
Building wheel for numpy (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"'; __file__='"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-wheel-1xmcy8ow
cwd: /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/
Complete output (32 lines):
Running from numpy source directory.
Cythonizing sources
Processing numpy/random/_bounded_integers.pxd.in
Processing numpy/random/_philox.pyx
Traceback (most recent call last):
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 59, in process_pyx
from Cython.Compiler.Version import version as cython_version
ModuleNotFoundError: No module named 'Cython'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 235, in <module>
main()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 231, in main
find_process_files(root_dir)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 222, in find_process_files
process(root_dir, fromfile, tofile, function, hash_db)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 188, in process
processor_function(fromfile, tofile)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 64, in process_pyx
raise OSError('Cython needs to be installed in Python as a module')
OSError: Cython needs to be installed in Python as a module
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 513, in <module>
setup_package()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 493, in setup_package
generate_cython()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 290, in generate_cython
raise RuntimeError("Running cythonize failed!")
RuntimeError: Running cythonize failed!
----------------------------------------
ERROR: Failed building wheel for numpy
Running setup.py clean for numpy
ERROR: Command errored out with exit status 1:
command: /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"'; __file__='"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' clean --all
cwd: /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0
Complete output (10 lines):
Running from numpy source directory.
`setup.py clean` is not supported, use one of the following instead:
- `git clean -xdf` (cleans all files)
- `git clean -Xdf` (cleans all versioned files, doesn't touch
files that aren't checked into the git repo)
Add `--force` to your command to use it anyway if you must (unsupported).
----------------------------------------
ERROR: Failed cleaning build dir for numpy
Failed to build numpy
Installing collected packages: pytz, python-dateutil, numpy, pandas
Running setup.py install for numpy ... error
ERROR: Command errored out with exit status 1:
command: /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"'; __file__='"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-record-4t7otijb/install-record.txt --single-version-externally-managed --compile --install-headers /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/include/site/python3.9/numpy
cwd: /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/
Complete output (41 lines):
Running from numpy source directory.
Note: if you need reliable uninstall behavior, then install
with pip instead of using `setup.py install`:
- `pip install .` (from a git repo or downloaded source
release)
- `pip install numpy` (last NumPy release on PyPi)
Cythonizing sources
numpy/random/_bounded_integers.pxd.in has not changed
Processing numpy/random/_philox.pyx
Traceback (most recent call last):
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 59, in process_pyx
from Cython.Compiler.Version import version as cython_version
ModuleNotFoundError: No module named 'Cython'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 235, in <module>
main()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 231, in main
find_process_files(root_dir)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 222, in find_process_files
process(root_dir, fromfile, tofile, function, hash_db)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 188, in process
processor_function(fromfile, tofile)
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/tools/cythonize.py", line 64, in process_pyx
raise OSError('Cython needs to be installed in Python as a module')
OSError: Cython needs to be installed in Python as a module
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 513, in <module>
setup_package()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 493, in setup_package
generate_cython()
File "/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py", line 290, in generate_cython
raise RuntimeError("Running cythonize failed!")
RuntimeError: Running cythonize failed!
----------------------------------------
ERROR: Command errored out with exit status 1: /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"'; __file__='"'"'/private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-install-bqphdnyh/numpy_217288709a414f079621a5af52b213b0/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/45/6dwwgy2x13166tqq3598sk280000gn/T/pip-record-4t7otijb/install-record.txt --single-version-externally-managed --compile --install-headers /Users/paul/.local/share/virtualenvs/hcp365_dashboard-iyCyyTy3/include/site/python3.9/numpy Check the logs for full command output.I can install and have installed pandas via pip and can use this...But when trying to use a pipenv environment it just hangs. |
|
I would like to know if it still exists on the master branch? Since I updated one of the packaging dependencies |
Yes, still hangs on installing packages on master branch for me. |
No, I didn't mean hanging, I meant if the build still failed. |
I canceled (CTRL + C) the installation of streamlit and this is pandas stuck for hours.
|
|
How is this coming along? |
Still not working for me. I get the same with sklearn and scipy. Just hangs for an age at "Installing build dependencies ... -" and then gives me a series of errors. Everything else seems to be fine. |
|
Same for me too, i can install anything but pandas via pipenv. Means I am going to have to use |
I can and have installed Pandas and used it in venv but sklearn refuses to install as does scipy. Very frustrating. |
|
people seem to be confusing this ticket with #4651, which is about hanging on install. this ticket is specifically about pipenv not being able to find the appropriate wheel distributions of certain packages |
|
with the upgrade to [email protected] i'm now getting "Installation succeeded" for both short version: long version, including successful pandas install:1. bare install
...yadda yadda compiler errors. |
|
|
|
oh there may actually be a workaround, according to this comment #4564 (comment) |
|
Still have this issue in the latest release. Failed when locking. |
|
Apologies for being critical, but this is obviously not being looked at/fixed (6 months is a somewhat obscene amount of time for such an urgent case). At this point it would be great to even just have a confirmation from the development team that users ought to move away from |
|
this issue appeared after macOS BigSur update. Heavily manifests itself with numpy numpy/numpy#17784 |
|
|
Any update on this issue? I got the same problem. |
|
I could installed numpy and pandas. But I have a problem with scipy and seaborn. Using cached scipy-1.6.3.tar.gz (27.2 MB) Failed to build numpy
|
|
(Slightly OT please forgive the noise. For those finding this thread looking for numpy/scipy solutions) As of 4th August 2021 with a M1 Macbook Pro with Big Sur v11.4 (20F71) Python 3.9.6 (Homebrew): Numpy just works (installs numpy v1.21.1): Scipy works with a combination of build flags and and libraries from homebrew (installs scipy v1.7.0): |
As of September 27th 2021, there is no need to include pythran nor add the --no-use-pep517 argument. pip install scipy works, as well as pip install scikit-learn that had the same issue as SciPy |
|
Just verified this is no longer an issue on the master branch. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Given the following:
Let us consider
mkdir test && cd testthe following minimal PipfileRunning a simple
pipenv installgenerates a mile long error message whose last bits areThis problem has been touched already for instance here, here and here concering
pip. Apparently the suggestion is to explicitly include the flag--no-use-pep517which however does not work in conjunction withpipenv, producingpipenv.vendor.requirementslib.exceptions.RequirementError: Failed parsing requirement from '--no-use-pep517'.It seems there is also a general problem with the version 2020.11.15, I do not exactly understand whether related or not. If instead of
pandasone installspipenv install request(or any other package not containing particular dependencies) the installation works fine, which makes me think the problem is indeed the building of thenumpywheels.What is the right procedure in this case to just proceed with the installation?
$ pipenv --support
Pipenv version:
'2020.11.15'Pipenv location:
'/usr/local/lib/python3.9/site-packages/pipenv'Python location:
'/usr/local/opt/[email protected]/bin/python3.9'Python installations found:
3.9.1:~/.local/share/virtualenvs/test-mmObi3rW/bin/python33.9.1:~/.local/share/virtualenvs/test-mmObi3rW/bin/python3.93.9.1:~/.local/share/virtualenvs/test-mmObi3rW/bin/python33.9.1:~/.local/share/virtualenvs/test-mmObi3rW/bin/python3.93.9.1:/usr/local/bin/python33.9.1:/usr/local/bin/python3.93.8.2:/usr/bin/python32.7.16:/usr/bin/python22.7.16:/usr/bin/python2.7PEP 508 Information:
System environment variables:
TERM_SESSION_IDSSH_AUTH_SOCKLC_TERMINAL_VERSIONCOLORFGBGITERM_PROFILEXPC_FLAGSPWDSHELL__CFBundleIdentifierLC_CTYPETERM_PROGRAM_VERSIONTERM_PROGRAMPATHLC_TERMINALCOLORTERMCOMMAND_MODETERMHOMETMPDIRUSERXPC_SERVICE_NAMELOGNAMEITERM_SESSION_ID__CF_USER_TEXT_ENCODINGSHLVLOLDPWDP9K_TTYZSHPAGERLESSLSCOLORSP9K_SSHEDITORLANGMANPAGERFZF_DEFAULT_OPTSFZF_DEFAULT_COMMANDPIP_DISABLE_PIP_VERSION_CHECKPYTHONDONTWRITEBYTECODEPIP_PYTHON_PATHPIPENV_ACTIVEVIRTUAL_ENVPS1_PIP_SHIMS_BASE_MODULEPYTHONFINDER_IGNORE_UNSUPPORTEDPipenv–specific environment variables:
PIPENV_ACTIVE:1Debug–specific environment variables:
PATH:~/.local/share/virtualenvs/test-mmObi3rW/bin:~/.cargo/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/Library/TeX/texbin:/usr/local/MacGPG2/bin:/usr/local/opt/fzf/binSHELL:/bin/zshEDITOR:vimLANG:en_US.UTF-8PWD:~/testVIRTUAL_ENV:~/.local/share/virtualenvs/test-mmObi3rWContents of
Pipfile('~/test/Pipfile'):The text was updated successfully, but these errors were encountered: