From 7e0f929fab8a893c908470aee0409b6d6603e083 Mon Sep 17 00:00:00 2001 From: Cyril Koenig Date: Thu, 14 Nov 2024 16:56:34 +0100 Subject: [PATCH] fpga: Removed hyperbus for this PR --- docs/tg/xilinx.md | 16 +++- .../flavor_bd/constraints/vcu118_hyperbus.xdc | 59 ------------ .../flavor_bd/constraints/vcu128_hyperbus.xdc | 54 ----------- .../scripts/carfield_bd_hyperbus.tcl | 17 ---- target/xilinx/flavor_bd/scripts/run.tcl | 6 -- .../constraints/vcu128_hyperbus.xdc | 90 ------------------- .../xilinx/flavor_vanilla/flavor_vanilla.mk | 1 + target/xilinx/flavor_vanilla/scripts/run.tcl | 3 - 8 files changed, 15 insertions(+), 231 deletions(-) delete mode 100644 target/xilinx/flavor_bd/constraints/vcu118_hyperbus.xdc delete mode 100644 target/xilinx/flavor_bd/constraints/vcu128_hyperbus.xdc delete mode 100644 target/xilinx/flavor_bd/scripts/carfield_bd_hyperbus.tcl delete mode 100644 target/xilinx/flavor_vanilla/constraints/vcu128_hyperbus.xdc diff --git a/docs/tg/xilinx.md b/docs/tg/xilinx.md index 6b8c2fb72..f57a1119f 100644 --- a/docs/tg/xilinx.md +++ b/docs/tg/xilinx.md @@ -8,8 +8,10 @@ Additionally, for on-chip debugging you need: We currently provide working setups for: -- Xilinx VCU128 with Vivado `>= 2020.2` -- Xilinx VCU118 with Vivado `>= 2020.2` +- Xilinx VCU128 with Vivado `== 2020.2` +- Xilinx VCU118 with Vivado `== 2020.2` + +**Note: Certain version of Vivado might cause issue, until these issues are resolved it is safer to use 2020.2** We are working on support for more boards in the future. @@ -25,6 +27,16 @@ design flow to link Carfield with external IPs. This flow is less human readable integrating more complex IPs as Xilinx Ethernet. *Note that this may require you to own the respective licenses.* +## For impatient readers + +The recommended command to build a bitstream (for VCU128) is + +```bash +make car-xil-all XILINX_FLAVOR=bd VIVADO="vitis-2020.2 vivado" VIVADO_MODE=gui XILINX_BOARD=vcu128 GEN_NO_HYPERBUS=1 GEN_EXT_JTAG=1 CARFIELD_CONFIG=carfield_l2dual_spatz_periph +``` + +Please find below more explanations. + ## Building the vanilla bistream (VCU128 only) Due to the structure of the Makefile flow. All the following commands are to be executed at the root diff --git a/target/xilinx/flavor_bd/constraints/vcu118_hyperbus.xdc b/target/xilinx/flavor_bd/constraints/vcu118_hyperbus.xdc deleted file mode 100644 index 5a45444b5..000000000 --- a/target/xilinx/flavor_bd/constraints/vcu118_hyperbus.xdc +++ /dev/null @@ -1,59 +0,0 @@ -# Copyright 2024 ETH Zurich and University of Bologna. -# Solderpad Hardware License, Version 0.51, see LICENSE for details. -# SPDX-License-Identifier: SHL-0.51 -# -# Cyril Koenig - -set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets design_1_i/carfield_xilinx_ip_0/inst/i_carfield_xilinx/gen_hyper_phy[0].padinst_hyper_rwds0/iobuf_i/O] - -# (FMCP_HSPC_LA13_N) -set_property PACKAGE_PIN AJ36 [get_ports "pad_hyper_csn[1]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L20N_T3L_N3_AD1N_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[1]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L20N_T3L_N3_AD1N_43 - -# (FMCP_HSPC_LA13_P) -set_property PACKAGE_PIN AJ35 [get_ports "pad_hyper_csn[0]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L20P_T3L_N2_AD1P_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[0]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L20P_T3L_N2_AD1P_43 - -# (FMCP_HSPC_LA14_P) -set_property PACKAGE_PIN AG31 [get_ports "pad_hyper_rwds"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L23P_T3U_N8_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_rwds"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L23P_T3U_N8_43 - -# (FMCP_HSPC_LA09_N) -set_property PACKAGE_PIN AK33 [get_ports "pad_hyper_dq[2]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L19N_T3L_N1_DBC_AD9N_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[2]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L19N_T3L_N1_DBC_AD9N_43 - -# (FMCP_HSPC_LA10_N) -set_property PACKAGE_PIN AR35 [get_ports "pad_hyper_dq[3]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L3N_T0L_N5_AD15N_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[3]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L3N_T0L_N5_AD15N_43 - -# (FMCP_HSPC_LA10_P) -set_property PACKAGE_PIN AP35 [get_ports "pad_hyper_dq[0]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L3P_T0L_N4_AD15P_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L3P_T0L_N4_AD15P_43 - -# (FMCP_HSPC_LA09_P) -set_property PACKAGE_PIN AJ33 [get_ports "pad_hyper_dq[4]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L19P_T3L_N0_DBC_AD9P_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[4]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L19P_T3L_N0_DBC_AD9P_43 - -# (FMCP_HSPC_LA06_N) -set_property PACKAGE_PIN AT36 [get_ports "pad_hyper_dq[7]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L2N_T0L_N3_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[7]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L2N_T0L_N3_43 - -# (FMCP_HSPC_LA06_P) -set_property PACKAGE_PIN AT35 [get_ports "pad_hyper_dq[1]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L2P_T0L_N2_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[1]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L2P_T0L_N2_43 - -# (FMCP_HSPC_LA01_CC_N) -set_property PACKAGE_PIN AL31 [get_ports "pad_hyper_ckn"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L16N_T2U_N7_QBC_AD3N_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_ckn"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L16N_T2U_N7_QBC_AD3N_43 - -# (FMCP_HSPC_LA01_CC_P) -set_property PACKAGE_PIN AL30 [get_ports "pad_hyper_ck"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L16P_T2U_N6_QBC_AD3P_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_ck"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L16P_T2U_N6_QBC_AD3P_43 - -# (FMCP_HSPC_LA05_N) -set_property PACKAGE_PIN AR38 [get_ports "pad_hyper_dq[5]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L1N_T0L_N1_DBC_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[5]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L1N_T0L_N1_DBC_43 - -# (FMCP_HSPC_LA05_P) -set_property PACKAGE_PIN AP38 [get_ports "pad_hyper_dq[6]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L1P_T0L_N0_DBC_43 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[6]"] ;# Bank 43 VCCO - VADJ_1V8_FPGA - IO_L1P_T0L_N0_DBC_43 diff --git a/target/xilinx/flavor_bd/constraints/vcu128_hyperbus.xdc b/target/xilinx/flavor_bd/constraints/vcu128_hyperbus.xdc deleted file mode 100644 index 0f1966bbd..000000000 --- a/target/xilinx/flavor_bd/constraints/vcu128_hyperbus.xdc +++ /dev/null @@ -1,54 +0,0 @@ -# Copyright 2024 ETH Zurich and University of Bologna. -# Solderpad Hardware License, Version 0.51, see LICENSE for details. -# SPDX-License-Identifier: SHL-0.51 -# -# Cyril Koenig - -set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets {design_1_i/carfield_xilinx_ip_0/inst/i_carfield_xilinx/gen_hyper_phy[0].padinst_hyper_rwds0/iobuf_i/O}] -set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets gen_hyper_phy[0].padinst_hyper_rwds0/iobuf_i/O] - -############ -# Hyperbus # -############ - -#set_property PACKAGE_PIN A16 [get_ports "pad_hyper_csn[0]"] ;# (FMCP_HSPC_LA22_N) Bank 71 VCCO - VADJ - IO_L24N_T3U_N11_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[0]"] ;# (FMCP_HSPC_LA22_N) Bank 71 VCCO - VADJ - IO_L24N_T3U_N11_71 -#set_property PACKAGE_PIN A20 [get_ports "pad_hyper_dq[7]"] ;# (FMCP_HSPC_LA20_N) Bank 71 VCCO - VADJ - IO_L22N_T3U_N7_DBC_AD0N_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[7]"] ;# (FMCP_HSPC_LA20_N) Bank 71 VCCO - VADJ - IO_L22N_T3U_N7_DBC_AD0N_71 -#set_property PACKAGE_PIN A21 [get_ports "pad_hyper_dq[6]"] ;# (FMCP_HSPC_LA20_P) Bank 71 VCCO - VADJ - IO_L22P_T3U_N6_DBC_AD0P_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[6]"] ;# (FMCP_HSPC_LA20_P) Bank 71 VCCO - VADJ - IO_L22P_T3U_N6_DBC_AD0P_71 -#set_property PACKAGE_PIN D20 [get_ports "pad_hyper_reset[0]"] ;# (FMCP_HSPC_LA25_P) Bank 71 VCCO - VADJ - IO_L18P_T2U_N10_AD2P_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_reset[0]"] ;# (FMCP_HSPC_LA25_P) Bank 71 VCCO - VADJ - IO_L18P_T2U_N10_AD2P_71 -set_property PACKAGE_PIN A24 [get_ports {pad_hyper_csn[1]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_csn[1]}] -set_property PACKAGE_PIN A25 [get_ports {pad_hyper_csn[0]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_csn[0]}] -set_property PACKAGE_PIN C23 [get_ports pad_hyper_rwds] -set_property IOSTANDARD LVCMOS18 [get_ports pad_hyper_rwds] -set_property PACKAGE_PIN D26 [get_ports {pad_hyper_dq[2]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[2]}] -set_property PACKAGE_PIN A23 [get_ports {pad_hyper_dq[3]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[3]}] -set_property PACKAGE_PIN B23 [get_ports {pad_hyper_dq[0]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[0]}] -set_property PACKAGE_PIN E26 [get_ports {pad_hyper_dq[4]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[4]}] -set_property PACKAGE_PIN D22 [get_ports {pad_hyper_dq[7]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[7]}] -set_property PACKAGE_PIN E22 [get_ports {pad_hyper_dq[1]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[1]}] -set_property PACKAGE_PIN F25 [get_ports pad_hyper_ckn] -set_property IOSTANDARD LVCMOS18 [get_ports pad_hyper_ckn] -set_property PACKAGE_PIN F26 [get_ports pad_hyper_ck] -set_property IOSTANDARD LVCMOS18 [get_ports pad_hyper_ck] -set_property PACKAGE_PIN G27 [get_ports {pad_hyper_dq[5]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[5]}] -set_property PACKAGE_PIN H27 [get_ports {pad_hyper_dq[6]}] -set_property IOSTANDARD LVCMOS18 [get_ports {pad_hyper_dq[6]}] -#set_property PACKAGE_PIN L23 [get_ports "pad_hyper_csn[1]"] ;# (FMCP_HSPC_LA02_P) Bank 72 VCCO - VADJ - IO_L4P_T0U_N6_DBC_AD7P_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[1]"] ;# (FMCP_HSPC_LA02_P) Bank 72 VCCO - VADJ - IO_L4P_T0U_N6_DBC_AD7P_72 -#set_property PACKAGE_PIN K23 [get_ports "pad_hyper_dq[5]"] ;# (FMCP_HSPC_LA16_N) Bank 72 VCCO - VADJ - IO_L3N_T0L_N5_AD15N_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[5]"] ;# (FMCP_HSPC_LA16_N) Bank 72 VCCO - VADJ - IO_L3N_T0L_N5_AD15N_72 -#set_property PACKAGE_PIN K24 [get_ports "pad_hyper_dq[4]"] ;# (FMCP_HSPC_LA16_P) Bank 72 VCCO - VADJ - IO_L3P_T0L_N4_AD15P_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[4]"] ;# (FMCP_HSPC_LA16_P) Bank 72 VCCO - VADJ - IO_L3P_T0L_N4_AD15P_72 - diff --git a/target/xilinx/flavor_bd/scripts/carfield_bd_hyperbus.tcl b/target/xilinx/flavor_bd/scripts/carfield_bd_hyperbus.tcl deleted file mode 100644 index c6fb15da8..000000000 --- a/target/xilinx/flavor_bd/scripts/carfield_bd_hyperbus.tcl +++ /dev/null @@ -1,17 +0,0 @@ -# Copyright 2020 ETH Zurich and University of Bologna. -# Solderpad Hardware License, Version 0.51, see LICENSE for details. -# SPDX-License-Identifier: SHL-0.51 -# -# Cyril Koenig - -set pad_hyper_ck [ create_bd_port -dir IO pad_hyper_ck ] -set pad_hyper_ckn [ create_bd_port -dir IO pad_hyper_ckn ] -set pad_hyper_csn [ create_bd_port -dir IO -from 1 -to 0 pad_hyper_csn ] -set pad_hyper_dq [ create_bd_port -dir IO -from 7 -to 0 pad_hyper_dq ] -set pad_hyper_rwds [ create_bd_port -dir IO pad_hyper_rwds ] - -connect_bd_net [get_bd_ports pad_hyper_csn] [get_bd_pins carfield_xilinx_ip_0/pad_hyper_csn] -connect_bd_net [get_bd_ports pad_hyper_ck] [get_bd_pins carfield_xilinx_ip_0/pad_hyper_ck] -connect_bd_net [get_bd_ports pad_hyper_ckn] [get_bd_pins carfield_xilinx_ip_0/pad_hyper_ckn] -connect_bd_net [get_bd_ports pad_hyper_rwds] [get_bd_pins carfield_xilinx_ip_0/pad_hyper_rwds] -connect_bd_net [get_bd_ports pad_hyper_dq] [get_bd_pins carfield_xilinx_ip_0/pad_hyper_dq] diff --git a/target/xilinx/flavor_bd/scripts/run.tcl b/target/xilinx/flavor_bd/scripts/run.tcl index dfba2c5f4..bd44a3877 100644 --- a/target/xilinx/flavor_bd/scripts/run.tcl +++ b/target/xilinx/flavor_bd/scripts/run.tcl @@ -32,12 +32,6 @@ if {[info exists ::env(GEN_EXT_JTAG)] && ($::env(GEN_EXT_JTAG)==1)} { import_files -fileset constrs_1 -norecurse constraints/$::env(XILINX_BOARD)_ext_jtag.xdc } -# Add the hyperbus pins to block design -if {![info exists ::env(GEN_NO_HYPERBUS)] || ($::env(GEN_NO_HYPERBUS)==0)} { - source scripts/carfield_bd_hyperbus.tcl - import_files -fileset constrs_1 -norecurse constraints/$::env(XILINX_BOARD)_hyperbus.xdc -} - make_wrapper -files [get_files $project/$project.srcs/sources_1/bd/design_1/design_1.bd] -top add_files -norecurse $project/$project.gen/sources_1/bd/design_1/hdl/design_1_wrapper.v diff --git a/target/xilinx/flavor_vanilla/constraints/vcu128_hyperbus.xdc b/target/xilinx/flavor_vanilla/constraints/vcu128_hyperbus.xdc deleted file mode 100644 index 014675acf..000000000 --- a/target/xilinx/flavor_vanilla/constraints/vcu128_hyperbus.xdc +++ /dev/null @@ -1,90 +0,0 @@ -# Copyright 2020 ETH Zurich and University of Bologna. -# Solderpad Hardware License, Version 0.51, see LICENSE for details. -# SPDX-License-Identifier: SHL-0.51 -# -# Cyril Koenig - -set_property CLOCK_DEDICATED_ROUTE FALSE [get_ports pad_hyper_rwds[0]] -set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets gen_hyper_phy[0].padinst_hyper_rwds0/iobuf_i/O] - - -set period_hyperbus 100 - -create_clock -period [expr $period_hyperbus] -name hyper_rwds_clk [get_ports pad_hyper_rwds[0]] - -create_generated_clock -name hyper_clk_phy -source [get_pins i_carfield/i_hyperbus_wrap/i_hyperbus/CLK] -divide_by 2 [get_pins i_carfield/i_hyperbus_wrap/i_hyperbus/clock_generator.ddr_clk/r_clk0_o_reg/Q] -create_generated_clock -name hyper_clk_phy_90 -source [get_pins i_carfield/i_hyperbus_wrap/i_hyperbus/CLK] -edges {2 4 6} [get_pins i_carfield/i_hyperbus_wrap/i_hyperbus/clock_generator.ddr_clk/r_clk90_o_reg/Q] - -set clk_rwds_delayed_pin [get_pins -of_objects [get_cells i_carfield/i_hyperbus_wrap/i_hyperbus/i_phy/i_phy/i_trx/i_delay_rx_rwds_90/i_delay] -filter {DIRECTION =~ OUT}] -set clk_rwds_delayed_inv_pin [get_pins i_carfield/i_hyperbus_wrap/i_hyperbus/i_phy/i_phy/i_trx/i_rx_rwds_cdc_fifo/CLK] - -set clk_rx_shift [expr $period_hyperbus/10] -set rwds_input_delay [expr $period_hyperbus/4] -create_generated_clock -name hyper_clk_rwds_delayed0 -edges {1 2 3} -edge_shift "$clk_rx_shift $clk_rx_shift $clk_rx_shift" \ - -source [get_ports pad_hyper_rwds[0]] $clk_rwds_delayed_pin -set_clock_latency [expr ${rwds_input_delay}] hyper_clk_rwds_delayed0 - -create_generated_clock -name hyper_clk_rwds_sample0 -invert -divide_by 1 -source $clk_rwds_delayed_pin $clk_rwds_delayed_inv_pin -set_clock_latency [expr ${rwds_input_delay}] hyper_clk_rwds_sample0 - -set_false_path -from [get_ports pad_hyper_rwds[0]] -to [get_ports pad_hyper_rwds[0]] -# these are for clock domain crossing -set_false_path -from [get_clocks hyper_rwds_clk] -to [get_clocks hyper_clk_phy] -set_false_path -from [get_clocks hyper_clk_phy] -to [get_clocks hyper_rwds_clk] -set_false_path -from [get_clocks hyper_clk_phy_90] -to [get_clocks hyper_clk_phy] -set_false_path -from [get_clocks hyper_clk_phy_90] -to [get_clocks hyper_rwds_clk] - -# Todo correct build correct input / output constraints - -set hyper_output_ports [get_ports pad_hyper_dq*] -set_output_delay [expr $period_hyperbus/2 ] -clock hyper_clk_phy [get_ports $hyper_output_ports] -max -set_output_delay [expr $period_hyperbus/-2] -clock hyper_clk_phy [get_ports $hyper_output_ports] -min -add_delay -set_output_delay [expr $period_hyperbus/2 ] -clock hyper_clk_phy [get_ports $hyper_output_ports] -max -clock_fall -add_delay -set_output_delay [expr $period_hyperbus/-2] -clock hyper_clk_phy [get_ports $hyper_output_ports] -min -clock_fall -add_delay - -set hyper_input_ports [get_ports -regexp pad_hyper_dq.*] -set_input_delay -max [expr $period_hyperbus/2] -clock hyper_clk_phy [get_ports $hyper_input_ports] -set_input_delay -min [expr $period_hyperbus/2] -clock hyper_clk_phy [get_ports $hyper_input_ports] -add_delay -set_input_delay -max [expr $period_hyperbus/2] -clock hyper_clk_phy [get_ports $hyper_input_ports] -add_delay -clock_fall -set_input_delay -min [expr $period_hyperbus/2] -clock hyper_clk_phy [get_ports $hyper_input_ports] -add_delay -clock_fall - -#set_property PACKAGE_PIN A16 [get_ports "pad_hyper_csn[0]"] ;# (FMCP_HSPC_LA22_N) Bank 71 VCCO - VADJ - IO_L24N_T3U_N11_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[0]"] ;# (FMCP_HSPC_LA22_N) Bank 71 VCCO - VADJ - IO_L24N_T3U_N11_71 -#set_property PACKAGE_PIN A20 [get_ports "pad_hyper_dq[7]"] ;# (FMCP_HSPC_LA20_N) Bank 71 VCCO - VADJ - IO_L22N_T3U_N7_DBC_AD0N_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[7]"] ;# (FMCP_HSPC_LA20_N) Bank 71 VCCO - VADJ - IO_L22N_T3U_N7_DBC_AD0N_71 -#set_property PACKAGE_PIN A21 [get_ports "pad_hyper_dq[6]"] ;# (FMCP_HSPC_LA20_P) Bank 71 VCCO - VADJ - IO_L22P_T3U_N6_DBC_AD0P_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[6]"] ;# (FMCP_HSPC_LA20_P) Bank 71 VCCO - VADJ - IO_L22P_T3U_N6_DBC_AD0P_71 -#set_property PACKAGE_PIN D20 [get_ports "pad_hyper_reset[0]"] ;# (FMCP_HSPC_LA25_P) Bank 71 VCCO - VADJ - IO_L18P_T2U_N10_AD2P_71 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_reset[0]"] ;# (FMCP_HSPC_LA25_P) Bank 71 VCCO - VADJ - IO_L18P_T2U_N10_AD2P_71 -set_property PACKAGE_PIN A24 [get_ports "pad_hyper_csn[0][1]"] ;# (FMCP_HSPC_LA13_N) Bank 72 VCCO - VADJ - IO_L24N_T3U_N11_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[0][1]"] ;# (FMCP_HSPC_LA13_N) Bank 72 VCCO - VADJ - IO_L24N_T3U_N11_72 -set_property PACKAGE_PIN A25 [get_ports "pad_hyper_csn[0][0]"] ;# (FMCP_HSPC_LA13_P) Bank 72 VCCO - VADJ - IO_L24P_T3U_N10_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[0][0]"] ;# (FMCP_HSPC_LA13_P) Bank 72 VCCO - VADJ - IO_L24P_T3U_N10_72 -set_property PACKAGE_PIN C23 [get_ports "pad_hyper_rwds[0]"] ;# (FMCP_HSPC_LA14_P) Bank 72 VCCO - VADJ - IO_L19P_T3L_N0_DBC_AD9P_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_rwds[0]"] ;# (FMCP_HSPC_LA14_P) Bank 72 VCCO - VADJ - IO_L19P_T3L_N0_DBC_AD9P_72 -set_property PACKAGE_PIN D26 [get_ports "pad_hyper_dq[0][2] "] ;# (FMCP_HSPC_LA09_N) Bank 72 VCCO - VADJ - IO_L17N_T2U_N9_AD10N_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][2] "] ;# (FMCP_HSPC_LA09_N) Bank 72 VCCO - VADJ - IO_L17N_T2U_N9_AD10N_72 -set_property PACKAGE_PIN A23 [get_ports pad_hyper_dq[0][3]] ;# (FMCP_HSPC_LA10_N) -set_property IOSTANDARD LVCMOS18 [get_ports pad_hyper_dq[0][3]] ;# (FMCP_HSPC_LA10_N) -set_property PACKAGE_PIN B23 [get_ports pad_hyper_dq[0][0]] ;# (FMCP_HSPC_LA10_P) -set_property IOSTANDARD LVCMOS18 [get_ports pad_hyper_dq[0][0]] ;# (FMCP_HSPC_LA10_P) -set_property PACKAGE_PIN E26 [get_ports "pad_hyper_dq[0][4]"] ;# (FMCP_HSPC_LA09_P) Bank 72 VCCO - VADJ - IO_L17P_T2U_N8_AD10P_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][4]"] ;# (FMCP_HSPC_LA09_P) Bank 72 VCCO - VADJ - IO_L17P_T2U_N8_AD10P_72 -set_property PACKAGE_PIN D22 [get_ports "pad_hyper_dq[0][7]"] ;# (FMCP_HSPC_LA06_N) Bank 72 VCCO - VADJ - IO_L15N_T2L_N5_AD11N_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][7]"] ;# (FMCP_HSPC_LA06_N) Bank 72 VCCO - VADJ - IO_L15N_T2L_N5_AD11N_72 -set_property PACKAGE_PIN E22 [get_ports "pad_hyper_dq[0][1]"] ;# (FMCP_HSPC_LA06_P) Bank 72 VCCO - VADJ - IO_L15P_T2L_N4_AD11P_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][1]"] ;# (FMCP_HSPC_LA06_P) Bank 72 VCCO - VADJ - IO_L15P_T2L_N4_AD11P_72 -set_property PACKAGE_PIN F25 [get_ports "pad_hyper_ckn[0]"] ;# (FMCP_HSPC_LA01_CC_N) Bank 72 VCCO - VADJ - IO_L14N_T2L_N3_GC_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_ckn[0]"] ;# (FMCP_HSPC_LA01_CC_N) Bank 72 VCCO - VADJ - IO_L14N_T2L_N3_GC_72 -set_property PACKAGE_PIN F26 [get_ports "pad_hyper_ck[0]"] ;# (FMCP_HSPC_LA01_CC_P) Bank 72 VCCO - VADJ - IO_L14P_T2L_N2_GC_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_ck[0]"] ;# (FMCP_HSPC_LA01_CC_P) Bank 72 VCCO - VADJ - IO_L14P_T2L_N2_GC_72 -set_property PACKAGE_PIN G27 [get_ports "pad_hyper_dq[0][5]"] ;# (FMCP_HSPC_LA05_N) Bank 72 VCCO - VADJ - IO_L9N_T1L_N5_AD12N_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][5]"] ;# (FMCP_HSPC_LA05_N) Bank 72 VCCO - VADJ - IO_L9N_T1L_N5_AD12N_72 -set_property PACKAGE_PIN H27 [get_ports "pad_hyper_dq[0][6]"] ;# (FMCP_HSPC_LA05_P) Bank 72 VCCO - VADJ - IO_L9P_T1L_N4_AD12P_72 -set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[0][6]"] ;# (FMCP_HSPC_LA05_P) Bank 72 VCCO - VADJ - IO_L9P_T1L_N4_AD12P_72 -#set_property PACKAGE_PIN L23 [get_ports "pad_hyper_csn[1]"] ;# (FMCP_HSPC_LA02_P) Bank 72 VCCO - VADJ - IO_L4P_T0U_N6_DBC_AD7P_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_csn[1]"] ;# (FMCP_HSPC_LA02_P) Bank 72 VCCO - VADJ - IO_L4P_T0U_N6_DBC_AD7P_72 -#set_property PACKAGE_PIN K23 [get_ports "pad_hyper_dq[5]"] ;# (FMCP_HSPC_LA16_N) Bank 72 VCCO - VADJ - IO_L3N_T0L_N5_AD15N_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[5]"] ;# (FMCP_HSPC_LA16_N) Bank 72 VCCO - VADJ - IO_L3N_T0L_N5_AD15N_72 -#set_property PACKAGE_PIN K24 [get_ports "pad_hyper_dq[4]"] ;# (FMCP_HSPC_LA16_P) Bank 72 VCCO - VADJ - IO_L3P_T0L_N4_AD15P_72 -#set_property IOSTANDARD LVCMOS18 [get_ports "pad_hyper_dq[4]"] ;# (FMCP_HSPC_LA16_P) Bank 72 VCCO - VADJ - IO_L3P_T0L_N4_AD15P_72 diff --git a/target/xilinx/flavor_vanilla/flavor_vanilla.mk b/target/xilinx/flavor_vanilla/flavor_vanilla.mk index ecbf97af5..037bdb7cf 100644 --- a/target/xilinx/flavor_vanilla/flavor_vanilla.mk +++ b/target/xilinx/flavor_vanilla/flavor_vanilla.mk @@ -46,6 +46,7 @@ $(CAR_XIL_DIR)/flavor_vanilla/scripts/add_sources.tcl: Bender.yml # Compile bitstream $(CAR_XIL_DIR)/flavor_vanilla/out/%.bit: $(xilinx_ips_paths_vanilla) $(CAR_XIL_DIR)/flavor_vanilla/scripts/add_sources.tcl + @if [ "$(GEN_NO_HYPERBUS)" != "1" ]; then echo "Hyperbus not supported yet in this branch"; fi; @mkdir -p $(CAR_XIL_DIR)/flavor_vanilla/out cd $(CAR_XIL_DIR)/flavor_vanilla && $(vivado_env) $(VIVADO) $(VIVADO_FLAGS) -source scripts/run.tcl find $(CAR_XIL_DIR)/flavor_vanilla/carfield* -name "*.ltx" -o -name "*.bit" -o -name "*routed.rpt" | xargs -I {} cp {} $(CAR_XIL_DIR)/flavor_vanilla/out diff --git a/target/xilinx/flavor_vanilla/scripts/run.tcl b/target/xilinx/flavor_vanilla/scripts/run.tcl index c40eb6de8..775794338 100644 --- a/target/xilinx/flavor_vanilla/scripts/run.tcl +++ b/target/xilinx/flavor_vanilla/scripts/run.tcl @@ -20,9 +20,6 @@ switch $::env(XILINX_BOARD) { if {[info exists ::env(GEN_EXT_JTAG)] && ($::env(GEN_EXT_JTAG)==1)} { import_files -fileset constrs_1 -norecurse constraints/$::env(XILINX_BOARD)_ext_jtag.xdc } - if {![info exists ::env(GEN_NO_HYPERBUS)] || ($::env(GEN_NO_HYPERBUS)==0)} { - import_files -fileset constrs_1 -norecurse constraints/$::env(XILINX_BOARD)_hyperbus.xdc - } # Vanilla specific import_files -fileset constrs_1 -norecurse constraints/carfield_top_xilinx.xdc