Skip to content
This repository has been archived by the owner on Sep 4, 2024. It is now read-only.

Xdt transform samples

Jump to bottom
David Ebbo edited this page Oct 7, 2015 · 53 revisions

Note: this section applies to both Pre-Installed and Private site extensions.

The simplest way to apply one of these transforms for your site is:

  • Create an applicationHost.xdt file under your 'site' folder (i.e. d:\home\site\applicationHost.xdt), and copy the content from the samples below into it

See Xml Document Transform for detailed documentation on the XDT syntax.

Adding environment variables

The following will inject an environment variable named FOO, with value BAR:

<?xml version="1.0"?> 
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> 
  <system.webServer> 
    <runtime xdt:Transform="InsertIfMissing">
      <environmentVariables xdt:Transform="InsertIfMissing">
        <add name="FOO" value="BAR" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />    
        <add name="PATH" value="%PATH%;%HOME%\BAR" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />    
      </environmentVariables>
    </runtime> 
  </system.webServer> 
</configuration>

Adding new applications to the 'scm' site

You may wonder how Kudu or other extensions gets set up in the SCM site. The key is the applicationHost.xdt (notice one exists for each versioned folders). The Xml Document Transform file is used to transform the actual applicationHost.config for the site.

This transform adds a /somepath IIS application under the SCM site.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <sites>
      <site name="%XDT_SCMSITENAME%" xdt:Locator="Match(name)">
        <application path="/somepath" xdt:Transform="Insert">
          <virtualDirectory path="/" physicalPath="%XDT_EXTENSIONPATH%" />
        </application>
      </site>
    </sites>
  </system.applicationHost>
</configuration>

Adding new applications to the 'main' site

It is a variation of the above but simply adds a /somepath IIS application under the main site (%XDT_SITENAME%) instead.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <sites>
      <site name="%XDT_SITENAME%" xdt:Locator="Match(name)">
        <application path="/somepath" xdt:Transform="Insert">
          <virtualDirectory path="/" physicalPath="%XDT_EXTENSIONPATH%" />
        </application>
      </site>
    </sites>
  </system.applicationHost>
</configuration>

Adding new sub applications to the 'main' site

It is a variation of the above but simply adds a /somepath/subpath IIS application under the main site (%XDT_SITENAME%).

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <sites>
      <site name="%XDT_SITENAME%" xdt:Locator="Match(name)">
        <application path="/somepath/subpath" xdt:Transform="Insert">
          <virtualDirectory path="/" physicalPath="%XDT_EXTENSIONPATH%" />
        </application>
      </site>
    </sites>
  </system.applicationHost>
</configuration>

Changing the number of segments allowed in the URL

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <sites>
      <site name="%XDT_SITENAME%" xdt:Locator="Match(name)">
        <limits xdt:Transform="Remove" />
        <limits xdt:Transform="Insert" maxUrlSegments="64" />
      </site>
    </sites>
  </system.applicationHost>
</configuration>

Adding a mime type to the httpCompression section

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <httpCompression>
      <dynamicTypes>
        <add mimeType="application/foo" enabled="true" xdt:Transform="Insert" />
      </dynamicTypes>
    </httpCompression>
  </system.webServer>
</configuration>

Turning off noCompressionForProxies attribute

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <httpCompression xdt:Transform="SetAttributes(noCompressionForProxies)" noCompressionForProxies="false" >
    </httpCompression>
  </system.webServer>
</configuration>

Remove all your recycling options from your .NET 4(+) application pool, and make it available always

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <applicationPools>
      <add name="%XDT_SITENAME%" xdt:Transform="Insert" autoStart="true" managedRuntimeVersion="v4.0" startMode="AlwaysRunning">
        <processModel idleTimeout="00:00:00" />
        <recycling>
          <periodicRestart time="00:00:00" />
        </recycling>
      </add>
    </applicationPools>
  </system.applicationHost>
</configuration>

Recycle your application pool at a given time, say off-business hours.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <applicationPools>
      <add name="%XDT_SITENAME%" xdt:Locator="Match(name)">
        <recycling xdt:Transform="Insert" >
          <periodicRestart>
            <schedule>
              <clear />
              <add value="00:00:00" />
            </schedule>
          </periodicRestart>
        </recycling>
      </add>
    </applicationPools>
  </system.applicationHost>
</configuration>

Increase the queueLength for your application pool

Note: the default is 1000

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <applicationPools>
      <add name="%XDT_SITENAME%" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(queueLength)" queueLength="5000">
      </add>
    </applicationPools>
  </system.applicationHost>
</configuration>

Adding or changing an attribute for a specific version of PHP

This transform finds the <application> tag that has the v5.4 full path, and adds a new queueLength attribute to it.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <fastCgi>
      <application xdt:Locator="Match(fullPath)" xdt:Transform="SetAttributes(queueLength)"
            fullPath="D:\Program Files (x86)\PHP\v5.4\php-cgi.exe" queueLength="5000"/>
    </fastCgi>
  </system.webServer>
</configuration>

This transform changes the value of maxInstances for PHP 5.4.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <fastCgi>
      <application xdt:Locator="Match(fullPath)" xdt:Transform="SetAttributes(maxInstances)"
            fullPath="D:\Program Files (x86)\PHP\v5.4\php-cgi.exe" maxInstances="8"/>
    </fastCgi>
  </system.webServer>
</configuration>

Using a custom php.ini

Use the following technique if you need to make changes to php.ini that can't be overridden in user.ini. The steps assume PHP 5.5, so tweak in the obvious way for other versions.

  • In the Kudu console, click on the planet-looking icon.
  • From there go in the config folder, and then in the PHP-5.5.18 folder (or whatever version you're using).
  • Run copy php.ini d:\home\site to copy it to your site folder.
  • Click the Home icon, and then go in the site folder to find your copy of php.ini.
  • Edit it and make any changes you need. e.g. to disable impersonation, comment out the line that has fastcgi.impersonate=1.
  • Now, deploy the applicationhost.xdt below to that same site folder (changing 5.5 to other version if needed). It will cause PHP to use your php.ini instead of the default.
  • Restart your site.
<?xml version="1.0"?> 
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> 
  <system.webServer> 
    <fastCgi>
      <application fullPath="D:\Program Files (x86)\PHP\v5.5\php-cgi.exe" xdt:Locator="Match(fullPath)">
        <environmentVariables>
          <environmentVariable name="PHPRC" xdt:Locator="Match(name)" value="d:\home\site\php.ini" xdt:Transform="SetAttributes(value)" />
        </environmentVariables>
      </application>
    </fastCgi>
  </system.webServer> 
</configuration>

Adding an ASP Classic attribute

e.g. this enables parent paths

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <asp xdt:Transform="SetAttributes(enableParentPaths)" enableParentPaths="true" />
  </system.webServer>
</configuration>

Registering an IIS Native HttpModule

e.g. this enables native module (native module must be registered at globalModules)

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <globalModules>
      <add name="Your Module Name" image="<path to dll such as d:\home\SiteExtensions\MyNative\module.dll>" preCondition="bitness32" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
    </globalModules>
  </system.webServer>
</configuration>

Registering an IIS Managed HttpModule

e.g. this enables SomeModule on the main site

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <location path="%XDT_SITENAME%" xdt:Locator="Match(path)">
    <system.webServer xdt:Transform="InsertIfMissing">
      <modules xdt:Transform="InsertIfMissing">
        <add name="SomeModule" type="SomeModule.SomeModuleType" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing"/>
      </modules>
    </system.webServer>
  </location>
</configuration>

Allowing arbitrary ISAPI extensions to be loaded

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <security>
      <isapiCgiRestriction xdt:Transform="SetAttributes(notListedIsapisAllowed)" notListedIsapisAllowed="true"/>
    </security>
  </system.webServer>
</configuration>

Adding IP restrictions

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <security>
      <ipSecurity xdt:Transform="RemoveAttributes(allowUnlisted)">
        <add ipAddress="204.79.197.200" allowed="true" xdt:Transform="Insert"/>
      </ipSecurity>
    </security>
  </system.webServer>
</configuration>

Only log successful http requests to the IIS log (aka Web Server log)

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <httpLogging xdt:Transform="SetAttributes(selectiveLogging)" selectiveLogging="LogSuccessful" />
  </system.webServer>
</configuration>

Change the number of failed request files that get kepts

The default is 50, and the following changes it to 100.

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.applicationHost>
    <sites>
      <site name="%XDT_SITENAME%" xdt:Locator="Match(name)">
        <traceFailedRequestsLogging xdt:Transform="Remove" />
        <traceFailedRequestsLogging xdt:Transform="Insert" enabled="true" customActionsEnabled="true" directory="D:\home\LogFiles" maxLogFileSizeKB="4096" maxLogFiles="100" />
      </site>
    </sites>
  </system.applicationHost>
</configuration>

Enable Web Sockets

The following does the equivalent of enabling Web Sockets in the portal

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer>
    <globalModules>
      <add name="WebSocketModule" xdt:Locator="Match(WebSocketModule)" xdt:Transform="Remove" />
      <add name="WebSocketModule" image="%windir%\System32\inetsrv\iiswsock.dll" xdt:Transform="Insert" />
    </globalModules>
    <webSocket xdt:Transform="SetAttributes(pingInterval)" pingInterval="00:02:30" />
  </system.webServer>
  <location path="" xdt:Locator="Match(path)" xdt:Transform="InsertIfMissing">
    <system.webServer xdt:Transform="InsertIfMissing">
      <modules xdt:Transform="InsertIfMissing">
        <add name="WebSocketModule" xdt:Locator="Match(WebSocketModule)" xdt:Transform="Remove" />
        <add name="WebSocketModule" lockItem="true" xdt:Transform="Insert" />
      </modules>
    </system.webServer>
  </location>
</configuration>

Add a rewrite rule

Add a rule that returns a 403 if a certain http header is present

<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <system.webServer xdt:Transform="InsertIfMissing">
    <rewrite xdt:Transform="InsertIfMissing">
      <rules xdt:Transform="InsertIfMissing">
        <rule name="MyRule" xdt:Locator="Match(name)" xdt:Transform="RemoveAll"/>
        <rule name="MyRule" xdt:Locator="Match(name)" patternSyntax="Wildcard" stopProcessing="true" xdt:Transform="InsertIfMissing">
          <match url="*" />
          <conditions>
              <add input="{HTTP_X_FORWARDED_SSL30}" pattern="1" />
          </conditions>
          <action type="CustomResponse" statusCode="403" subStatusCode="900" statusReason="Forbidden" statusDescription="Forbidden" />
        </rule>
      </rules>
    </rewrite>    
  </system.webServer>
</configuration>

Add an allowedServerVariables

Add CONTENT_TYPE to the list of allowed variables:

<?xml version="1.0"?> 
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> 
  <system.webServer> 
    <rewrite>
      <allowedServerVariables>
        <add name="CONTENT_TYPE" xdt:Transform="InsertIfMissing" />
      </allowedServerVariables>
    </rewrite>
  </system.webServer>
</configuration>
Clone this wiki locally