diff --git a/.github/.wordlist.txt b/.github/.wordlist.txt
index 9e778041994626..5cdc3211a85e39 100644
--- a/.github/.wordlist.txt
+++ b/.github/.wordlist.txt
@@ -727,6 +727,7 @@ OTARequesterImpl
 OTARequestor
 OTARequestorDriver
 OTARequestorSerialPort
+otasoftwareupdaterequestor
 OTBR
 otcli
 PAA
diff --git a/examples/ota-provider-app/esp32/README.md b/examples/ota-provider-app/esp32/README.md
index 7ae2797c93b959..c849db6afd95d6 100644
--- a/examples/ota-provider-app/esp32/README.md
+++ b/examples/ota-provider-app/esp32/README.md
@@ -38,27 +38,10 @@ idf.py -p <OTAProviderSerialPort> flash
 -   Commissioning the OTA Provider
 
 ```
-./out/debug/chip-tool pairing ble-wifi 12345 <ssid> <passphrase> 0 20202021 3841
+./out/debug/chip-tool pairing ble-wifi 12345 <ssid> <passphrase> 20202021 3841
 ```
 
 ---
 
-Please note down the IP Address and Node ID of OTA Provider, these are required
-for [OTA Requestor Example](../../ota-requestor-app/esp32). Once OTA provider is
-commissioned then head over to
+Once OTA provider is commissioned then head over to
 [OTA Requestor Example](../../ota-requestor-app/esp32).
-
----
-
-## Features
-
--   Can complete full BDX transfer
--   Provide the full OTA image to Requestor
-
-## Limitations
-
--   Synchronous BDX transfer only
--   Does not check VID/PID
--   Only one transfer at a time
--   Does not check incoming UpdateTokens
--   Does not support the header defined in Matter Specification.
diff --git a/examples/ota-requestor-app/esp32/README.md b/examples/ota-requestor-app/esp32/README.md
index bcea1698862d97..3fa1a299b5e53a 100644
--- a/examples/ota-requestor-app/esp32/README.md
+++ b/examples/ota-requestor-app/esp32/README.md
@@ -31,67 +31,41 @@ idf.py -p <OTARequestorSerialPort> flash monitor
 -   Commissioning the OTA Requestor
 
 ```
-./out/debug/chip-tool pairing ble-wifi 12346 <ssid> <passphrase> 0 20202021 3840
+./out/debug/chip-tool pairing ble-wifi 12346 <ssid> <passphrase> 20202021 3840
 ```
 
 ## Query for an OTA Image
 
-After commissioning is successful, query for OTA image. Head over to ESP32
-console and fire the following command. This command creates a CASE session with
-OTA Provider and start the OTA image transfer using BDX protocol.
+After commissioning is successful, announce OTA provider's presence using
+chip-tool. On receiving this command OTA requestor will query for OTA image.
 
 ```
-esp32> QueryImage <OTAProviderIpAddress> <OTAProviderNodeId>
-```
-
-OTA image transfer takes some time and once done it prints following log
-
-```
-I (322620) OTARequesterImpl: Transfer complete!
+./out/debug/chip-tool otasoftwareupdaterequestor announce-ota-provider 12345 0 0 12346 0
 ```
 
 ## Apply update request
 
 Once transfer is complete OTA Requestor should take permission from the OTA
-Provider for applying the OTA image.
+Provider for applying the OTA image. Use the following command from OTA
+requestor prompt
 
 ```
-esp32> ApplyUpdateRequest <OTAProviderIpAddress> <OTAProviderNodeId>
+esp32> ApplyUpdateRequest
 ```
 
-After this step device should reboot and start running hello world example.
+Then reboot the device manually to boot from upgraded OTA image.
 
 ## ESP32 OTA Requestor with Linux OTA Provider
 
 -   Build the [Linux OTA Provider](../../ota-provider-app/linux)
--   Run the Linux OTA Provider with
-    [hello world OTA image](http://shubhamdp.github.io/esp_ota/esp32/hello-world-for-linux-provider.bin).
-    This OTA image is built for ESP32, it will not work on other devices.
+-   Run the Linux OTA Provider with OTA image.
 
 ```
-./out/debug/chip-ota-provider-app -f hello-world-for-linux-provider.bin
+./out/debug/chip-ota-provider-app -f hello-world.bin
 ```
 
 -   Provision the Linux OTA Provider using chip-tool
 
 ```
-./out/debug/chip-tool pairing 12345 20202021
+./out/debug/chip-tool pairing onnetwork 12345 20202021
 ```
-
--   Note down the OTA Provider IP address and Node Id and repeat the steps for
-    ESP32 OTA Requestor app
-
----
-
-## Features
-
--   Can perform the actual OTA if the image provided is valid
--   Code for running a full BDX download exists in BDX
--   Can send QueryImage and ApplyUpdateRequest commands triggered from console
--   Downloads a file over BDX served by an OTA Provider server
-
-## Limitations
-
--   Does not verify QueryImageResponse status
--   Does not support AnnounceOTAProvider command or OTA Requestor attributes
--   Does not support the header defined in Matter Specification.