diff --git a/config/nrfconnect/app/check-sysbuild-use.cmake b/config/nrfconnect/app/check-sysbuild-use.cmake
index cce02b8c2199cf..bd70da84a7479d 100644
--- a/config/nrfconnect/app/check-sysbuild-use.cmake
+++ b/config/nrfconnect/app/check-sysbuild-use.cmake
@@ -21,11 +21,11 @@ if (NOT SYSBUILD)
     message(FATAL_ERROR " ###################################################################################\n"
                         " # This example does not support child-image approach anymore.                     #\n"
                         " # The nRF Connect SDK platform marked child-image approach as deprecated          #\n"
-                        " # and it is recommended to use the new sysbuild solution.                         #\n"
+                        " # from v2.7.0 and it is recommended to use the new sysbuild solution.             #\n"
                         " #                                                                                 #\n"
                         " # To build this application with sysbuild support enabled,                        #\n"
                         " # you have to add --sysbuild flag to the build command, for example:              #\n"
                         " #                                                                                 #\n"
-                        " # west build -b <your_board_name> --sysbuild nameIt was moved to support sysbuild #\n"
+                        " # west build -b <your_board_name> --sysbuild                                      #\n"
                         " ###################################################################################\n")
 endif()
diff --git a/config/nrfconnect/chip-module/CMakeLists.txt b/config/nrfconnect/chip-module/CMakeLists.txt
index 7094ab33c004dc..bccd16b1416160 100644
--- a/config/nrfconnect/chip-module/CMakeLists.txt
+++ b/config/nrfconnect/chip-module/CMakeLists.txt
@@ -240,7 +240,7 @@ endif()
 # Define 'factory_data' target for generating a factory data partition
 # ==============================================================================
 
-if(CONFIG_CHIP_FACTORY_DATA_BUILD AND (NOT SYSBUILD OR (SYSBUILD AND NOT CONFIG_PARTITION_MANAGER_ENABLED)))
+if(CONFIG_CHIP_FACTORY_DATA_BUILD AND (NOT SYSBUILD OR NOT CONFIG_PARTITION_MANAGER_ENABLED))
     nrfconnect_generate_factory_data()
 endif()
 
diff --git a/docs/guides/nrfconnect_factory_data_configuration.md b/docs/guides/nrfconnect_factory_data_configuration.md
index e6c5b9dd068f92..27595e2888d616 100644
--- a/docs/guides/nrfconnect_factory_data_configuration.md
+++ b/docs/guides/nrfconnect_factory_data_configuration.md
@@ -787,7 +787,7 @@ $ west build -b nrf52840dk_nrf52840 -- -DCONFIG_CHIP_FACTORY_DATA=y -DSB_CONFIG_
 ```
 
 Alternatively, you can also add `SB_CONFIG_MATTER_FACTORY_DATA_GENERATE=y`
-Kconfig setting to the example's `prj.conf` file.
+Kconfig setting to the example's `sysbuild.conf` file.
 
 Each factory data parameter has a default value. These are described in the
 [Kconfig file](../../config/nrfconnect/chip-module/Kconfig). Setting a new value
diff --git a/examples/chef/nrfconnect/Kconfig.sysbuild b/examples/chef/nrfconnect/Kconfig.sysbuild
new file mode 100644
index 00000000000000..b3e964a82b5439
--- /dev/null
+++ b/examples/chef/nrfconnect/Kconfig.sysbuild
@@ -0,0 +1,29 @@
+#
+#    Copyright (c) 2024 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+#### Radio core selection
+config NRF_DEFAULT_IPC_RADIO
+	default y
+
+# Enable IEEE802.15.4 serialization to network core
+config NETCORE_IPC_RADIO_IEEE802154
+	default y if SOC_SERIES_NRF53X
+
+# Enable Bluetooth serialization to network core
+config NETCORE_IPC_RADIO_BT_HCI_IPC
+	default y if SOC_SERIES_NRF53X
+
+source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"
diff --git a/examples/chef/nrfconnect/sysbuild.conf b/examples/chef/nrfconnect/sysbuild.conf
new file mode 100644
index 00000000000000..e63a92c6b2bbab
--- /dev/null
+++ b/examples/chef/nrfconnect/sysbuild.conf
@@ -0,0 +1,18 @@
+#
+#    Copyright (c) 2024 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+SB_CONFIG_MATTER=y
+SB_CONFIG_MATTER_OTA=n
diff --git a/examples/chef/nrfconnect/sysbuild/ipc_radio/boards/nrf5340dk_nrf5340_cpunet.conf b/examples/chef/nrfconnect/sysbuild/ipc_radio/boards/nrf5340dk_nrf5340_cpunet.conf
new file mode 100644
index 00000000000000..8540585e53358b
--- /dev/null
+++ b/examples/chef/nrfconnect/sysbuild/ipc_radio/boards/nrf5340dk_nrf5340_cpunet.conf
@@ -0,0 +1,58 @@
+#
+#    Copyright (c) 2024 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+# Disable serial and UART interface.
+CONFIG_SERIAL=n
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG=n
+
+# RAM usage configuration
+CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
+
+# BT configuration
+CONFIG_BT=y
+CONFIG_BT_HCI_RAW=y
+CONFIG_BT_MAX_CONN=1
+CONFIG_BT_CTLR_ASSERT_HANDLER=y
+CONFIG_BT_PERIPHERAL=y
+CONFIG_BT_CENTRAL=n
+CONFIG_BT_BUF_ACL_RX_SIZE=502
+CONFIG_BT_BUF_ACL_TX_SIZE=251
+CONFIG_BT_CTLR_DATA_LENGTH_MAX=251
+CONFIG_BT_CTLR_PHY_2M=n
+
+# 802.15.4 configuration
+CONFIG_NRF_802154_SER_RADIO=y
+CONFIG_NRF_802154_ENCRYPTION=y
+CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=2
+
+# Debug and assert configuration
+CONFIG_ASSERT=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EXCEPTION_STACK_TRACE=y
+CONFIG_RESET_ON_FATAL_ERROR=n
+CONFIG_REBOOT=n
+
+# IPC
+CONFIG_MBOX=y
+CONFIG_IPC_SERVICE=y
+
+# ipc_radio
+CONFIG_IPC_RADIO_BT=y
+CONFIG_IPC_RADIO_BT_HCI_IPC=y
+CONFIG_IPC_RADIO_802154=y
diff --git a/examples/chef/nrfconnect/sysbuild/ipc_radio/prj.conf b/examples/chef/nrfconnect/sysbuild/ipc_radio/prj.conf
new file mode 100644
index 00000000000000..8906415dda4fc7
--- /dev/null
+++ b/examples/chef/nrfconnect/sysbuild/ipc_radio/prj.conf
@@ -0,0 +1,21 @@
+#
+#    Copyright (c) 2024 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_SERIAL=n
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG=n
+
+CONFIG_RESET_ON_FATAL_ERROR=n
diff --git a/examples/chef/nrfconnect/sysbuild/ipc_radio/prj_release.conf b/examples/chef/nrfconnect/sysbuild/ipc_radio/prj_release.conf
new file mode 100644
index 00000000000000..7f92a51630cce0
--- /dev/null
+++ b/examples/chef/nrfconnect/sysbuild/ipc_radio/prj_release.conf
@@ -0,0 +1,20 @@
+#
+#    Copyright (c) 2024 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+CONFIG_SERIAL=n
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG=n
+
+CONFIG_RESET_ON_FATAL_ERROR=y
diff --git a/examples/lighting-app/nrfconnect/Kconfig.sysbuild b/examples/lighting-app/nrfconnect/Kconfig.sysbuild
index 4a0b8f3656b1eb..4048c88bf51f0f 100644
--- a/examples/lighting-app/nrfconnect/Kconfig.sysbuild
+++ b/examples/lighting-app/nrfconnect/Kconfig.sysbuild
@@ -26,9 +26,12 @@ config NETCORE_IPC_RADIO_IEEE802154
 config NETCORE_IPC_RADIO_BT_HCI_IPC
 	default y if SOC_SERIES_NRF53X
 
+config MATTER_OTA
+	default n if BOARD_NRF52840DONGLE_NRF52840
+
 #### Bootloader
 choice BOOTLOADER
-	default BOOTLOADER_MCUBOOT
+	default BOOTLOADER_MCUBOOT if !BOARD_NRF52840DONGLE_NRF52840
 endchoice
 
 if BOOTLOADER_MCUBOOT
@@ -71,6 +74,6 @@ endif # BOOTLOADER_MCUBOOT
 
 #### Enable generating factory data
 config MATTER_FACTORY_DATA_GENERATE
-	default y 
+	default y if !BOARD_NRF52840DONGLE_NRF52840
 
 source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"
diff --git a/scripts/examples/nrfconnect_example.sh b/scripts/examples/nrfconnect_example.sh
index 936269a0560780..67223afb2a092e 100755
--- a/scripts/examples/nrfconnect_example.sh
+++ b/scripts/examples/nrfconnect_example.sh
@@ -51,4 +51,4 @@ fi
 export CCACHE_BASEDIR="$PWD/$APP/nrfconnect"
 
 env
-west build -p auto -b "$BOARD" -d "$APP/nrfconnect/build" "$APP/nrfconnect" -- "${COMMON_CI_FLAGS[@]}" "$@" --sysbuild
+west build -p auto -b "$BOARD" -d "$APP/nrfconnect/build" "$APP/nrfconnect" --sysbuild -- "${COMMON_CI_FLAGS[@]}" "$@"