diff --git a/src/app/tests/suites/certification/Test_TC_TSTAT_4_2.yaml b/src/app/tests/suites/certification/Test_TC_TSTAT_4_2.yaml deleted file mode 100644 index b813eafd402606..00000000000000 --- a/src/app/tests/suites/certification/Test_TC_TSTAT_4_2.yaml +++ /dev/null @@ -1,2228 +0,0 @@ -# Copyright (c) 2024 Project CHIP Authors -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -name: 42.4.2. [TC-TSTAT-4.2] Preset Test Cases with server as DUT - -PICS: - - TSTAT.S - -config: - nodeId: 0x12344321 - cluster: "Thermostat" - endpoint: 1 - -tests: - - label: "Step 1: Commission DUT to TH" - cluster: "DelayCommands" - command: "WaitForCommissionee" - arguments: - values: - - name: "nodeId" - value: nodeId - - - label: - "Step 2: Test Harness writes to the Presets attribute without calling - the StartPresetsSchedulesEditRequest" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #2 Test Harness Client attempts to write Presets and gets an INVALID_IN_STATE error since the client didn't send a request to edit the presets by calling StartPresetsSchedulesEditRequest command. - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": null, "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a INVALID_IN_STATE (0xCB) - - [1722285385.263] [53729:5380292] [DMG] WriteClient moving to [AwaitingDe] - [1722285385.263] [53729:5380292] [TOO] Response Failure: IM Error 0x000005CB: General error: 0xcb (INVALID_IN_STATE) - [1722285385.263] [53729:5380292] [EM] <<< [E:42658i S:21691 M:14088666 (Ack:20978215)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722285385.263] [53729:5380292] [EM] Flushed pending ack for MessageCounter:20978215 on exchange 42658i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 3a: Test Harness writes to the Presets attribute after calling - the StartPresetsSchedulesEditRequest command" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 3b: Test Harness writes to the Presets attribute adding 3 - presets for Sleep, Wake and GoingToSleep" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": null, "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": null, "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": null, "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286250.503] [54321:5397545] [DMG] WriteClient moving to [ResponseRe] - [1722286250.503] [54321:5397545] [DMG] WriteResponseMessage = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] AttributeStatusIBs = - [1722286250.503] [54321:5397545] [DMG] [ - [1722286250.503] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] AttributePathIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.503] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.503] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.503] [54321:5397545] [DMG] } - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] StatusIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.503] [54321:5397545] [DMG] }, - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] }, - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] AttributePathIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.503] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.503] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.503] [54321:5397545] [DMG] ListIndex = Null, - [1722286250.503] [54321:5397545] [DMG] } - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] StatusIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.503] [54321:5397545] [DMG] }, - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] }, - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] AttributePathIB = - [1722286250.503] [54321:5397545] [DMG] { - [1722286250.503] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.503] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.503] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.503] [54321:5397545] [DMG] ListIndex = Null, - [1722286250.503] [54321:5397545] [DMG] } - [1722286250.503] [54321:5397545] [DMG] - [1722286250.503] [54321:5397545] [DMG] StatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] AttributePathIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.504] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.504] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.504] [54321:5397545] [DMG] ListIndex = Null, - [1722286250.504] [54321:5397545] [DMG] } - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] StatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] AttributePathIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.504] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.504] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.504] [54321:5397545] [DMG] ListIndex = Null, - [1722286250.504] [54321:5397545] [DMG] } - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] StatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] AttributeStatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] AttributePathIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] Endpoint = 0x1, - [1722286250.504] [54321:5397545] [DMG] Cluster = 0x201, - [1722286250.504] [54321:5397545] [DMG] Attribute = 0x0000_0050, - [1722286250.504] [54321:5397545] [DMG] ListIndex = Null, - [1722286250.504] [54321:5397545] [DMG] } - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] StatusIB = - [1722286250.504] [54321:5397545] [DMG] { - [1722286250.504] [54321:5397545] [DMG] status = 0x00 (SUCCESS), - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] }, - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] ], - [1722286250.504] [54321:5397545] [DMG] - [1722286250.504] [54321:5397545] [DMG] InteractionModelRevision = 11 - [1722286250.504] [54321:5397545] [DMG] } - [1722286250.504] [54321:5397545] [DMG] WriteClient moving to [AwaitingDe] - [1722286250.504] [54321:5397545] [EM] <<< [E:14426i S:42250 M:116961408 (Ack:156984778)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286250.504] [54321:5397545] [EM] Flushed pending ack for MessageCounter:156984778 on exchange 14426i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 3c: Test Harness reads the Presets attribute without calling - the CommitPresetsSchedulesRequest command" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3c Test Harness Client reads Presets attribute but the new additions are not committed since the client didn't call the CommitPresetsSchedulesRequest command - - ./chip-tool thermostat read presets 0x12344321 1 - On TH(chip-tool) verify that DUT successfully read Presets (but without the new changes) - [1722286701.424] [54699:5406692] [TOO] Endpoint: 1 Cluster: 0x0000_0201 Attribute 0x0000_0050 DataVersion: 3807987049 - [1722286701.425] [54699:5406692] [TOO] Presets: 2 entries - [1722286701.425] [54699:5406692] [TOO] [1]: { - [1722286701.425] [54699:5406692] [TOO] PresetHandle: 01 - [1722286701.425] [54699:5406692] [TOO] PresetScenario: 1 - [1722286701.425] [54699:5406692] [TOO] CoolingSetpoint: 2500 - [1722286701.425] [54699:5406692] [TOO] HeatingSetpoint: 2100 - [1722286701.426] [54699:5406692] [TOO] BuiltIn: TRUE - [1722286701.426] [54699:5406692] [TOO] } - [1722286701.426] [54699:5406692] [TOO] [2]: { - [1722286701.426] [54699:5406692] [TOO] PresetHandle: 02 - [1722286701.426] [54699:5406692] [TOO] PresetScenario: 2 - [1722286701.426] [54699:5406692] [TOO] CoolingSetpoint: 2600 - [1722286701.426] [54699:5406692] [TOO] HeatingSetpoint: 2000 - [1722286701.426] [54699:5406692] [TOO] BuiltIn: TRUE - [1722286701.426] [54699:5406692] [TOO] } - [1722286701.426] [54699:5406692] [EM] <<< [E:49759i S:37002 M:67372150 (Ack:254131025)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 3d: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3d Test Harness Client calls CommitPresetsSchedulesRequest command - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722287841.505] [55282:5425045] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x0 - [1722287841.505] [55282:5425045] [DMG] ICR moving to [AwaitingDe] - [1722287841.505] [55282:5425045] [EM] <<< [E:46441i S:57071 M:61366563 (Ack:138534230)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 3e: Test Harness reads the Presets attribute after calling the - CommitPresetsSchedulesRequest command" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3e Test Harness Client reads Presets attribute and can see the added Presets. - - ./chip-tool thermostat read presets 0x12344321 1 - On TH(chip-tool) verify that DUT successfully read Presets (with the new changes) - [1722288101.757] [55446:5430009] [TOO] Endpoint: 1 Cluster: 0x0000_0201 Attribute 0x0000_0050 DataVersion: 3807987055 - [1722288101.757] [55446:5430009] [TOO] Presets: 5 entries - [1722288101.758] [55446:5430009] [TOO] [1]: { - [1722288101.759] [55446:5430009] [TOO] PresetHandle: 01 - [1722288101.759] [55446:5430009] [TOO] PresetScenario: 1 - [1722288101.759] [55446:5430009] [TOO] CoolingSetpoint: 2500 - [1722288101.759] [55446:5430009] [TOO] HeatingSetpoint: 2600 - [1722288101.759] [55446:5430009] [TOO] BuiltIn: TRUE - [1722288101.759] [55446:5430009] [TOO] } - [1722288101.759] [55446:5430009] [TOO] [2]: { - [1722288101.759] [55446:5430009] [TOO] PresetHandle: 02 - [1722288101.759] [55446:5430009] [TOO] PresetScenario: 2 - [1722288101.759] [55446:5430009] [TOO] CoolingSetpoint: 2600 - [1722288101.759] [55446:5430009] [TOO] HeatingSetpoint: 2500 - [1722288101.759] [55446:5430009] [TOO] BuiltIn: TRUE - [1722288101.759] [55446:5430009] [TOO] } - [1722288101.759] [55446:5430009] [TOO] [3]: { - [1722288101.759] [55446:5430009] [TOO] PresetHandle: 03 - [1722288101.759] [55446:5430009] [TOO] PresetScenario: 3 - [1722288101.759] [55446:5430009] [TOO] Name: Sleep - [1722288101.759] [55446:5430009] [TOO] CoolingSetpoint: 2500 - [1722288101.759] [55446:5430009] [TOO] HeatingSetpoint: 2600 - [1722288101.759] [55446:5430009] [TOO] BuiltIn: FALSE - [1722288101.759] [55446:5430009] [TOO] } - [1722288101.759] [55446:5430009] [TOO] [4]: { - [1722288101.759] [55446:5430009] [TOO] PresetHandle: 04 - [1722288101.759] [55446:5430009] [TOO] PresetScenario: 4 - [1722288101.759] [55446:5430009] [TOO] Name: Wake - [1722288101.759] [55446:5430009] [TOO] CoolingSetpoint: 2200 - [1722288101.759] [55446:5430009] [TOO] HeatingSetpoint: 2900 - [1722288101.759] [55446:5430009] [TOO] BuiltIn: FALSE - [1722288101.759] [55446:5430009] [TOO] } - [1722288101.759] [55446:5430009] [TOO] [5]: { - [1722288101.759] [55446:5430009] [TOO] PresetHandle: 06 - [1722288101.759] [55446:5430009] [TOO] PresetScenario: 6 - [1722288101.759] [55446:5430009] [TOO] Name: GoingToSleep - [1722288101.759] [55446:5430009] [TOO] CoolingSetpoint: 2100 - [1722288101.759] [55446:5430009] [TOO] HeatingSetpoint: 2500 - [1722288101.759] [55446:5430009] [TOO] BuiltIn: FALSE - [1722288101.759] [55446:5430009] [TOO] } - [1722288101.759] [55446:5430009] [EM] <<< [E:64397i S:21821 M:262922240 (Ack:37271345)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722288101.760] [55446:5430009] [EM] Flushed pending ack for MessageCounter:37271345 on exchange 64397i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 4a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #4a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 4b: Test Harness writes to the Presets attribute with a - built-in preset having preset handle hex:01 removed" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #4b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722288460.741] [55752:5437815] [DMG] WriteClient moving to [ResponseRe] - [1722288460.741] [55752:5437815] [DMG] WriteResponseMessage = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] AttributeStatusIBs = - [1722288460.741] [55752:5437815] [DMG] [ - [1722288460.741] [55752:5437815] [DMG] AttributeStatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] AttributePathIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] Endpoint = 0x1, - [1722288460.741] [55752:5437815] [DMG] Cluster = 0x201, - [1722288460.741] [55752:5437815] [DMG] Attribute = 0x0000_0050, - [1722288460.741] [55752:5437815] [DMG] } - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] StatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] status = 0x00 (SUCCESS), - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] AttributeStatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] AttributePathIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] Endpoint = 0x1, - [1722288460.741] [55752:5437815] [DMG] Cluster = 0x201, - [1722288460.741] [55752:5437815] [DMG] Attribute = 0x0000_0050, - [1722288460.741] [55752:5437815] [DMG] ListIndex = Null, - [1722288460.741] [55752:5437815] [DMG] } - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] StatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] status = 0x00 (SUCCESS), - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] AttributeStatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] AttributePathIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] Endpoint = 0x1, - [1722288460.741] [55752:5437815] [DMG] Cluster = 0x201, - [1722288460.741] [55752:5437815] [DMG] Attribute = 0x0000_0050, - [1722288460.741] [55752:5437815] [DMG] ListIndex = Null, - [1722288460.741] [55752:5437815] [DMG] } - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] StatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] status = 0x00 (SUCCESS), - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] }, - [1722288460.741] [55752:5437815] [DMG] - [1722288460.741] [55752:5437815] [DMG] AttributeStatusIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.741] [55752:5437815] [DMG] AttributePathIB = - [1722288460.741] [55752:5437815] [DMG] { - [1722288460.742] [55752:5437815] [DMG] Endpoint = 0x1, - [1722288460.742] [55752:5437815] [DMG] Cluster = 0x201, - [1722288460.742] [55752:5437815] [DMG] Attribute = 0x0000_0050, - [1722288460.742] [55752:5437815] [DMG] ListIndex = Null, - [1722288460.742] [55752:5437815] [DMG] } - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] StatusIB = - [1722288460.742] [55752:5437815] [DMG] { - [1722288460.742] [55752:5437815] [DMG] status = 0x00 (SUCCESS), - [1722288460.742] [55752:5437815] [DMG] }, - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] }, - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] AttributeStatusIB = - [1722288460.742] [55752:5437815] [DMG] { - [1722288460.742] [55752:5437815] [DMG] AttributePathIB = - [1722288460.742] [55752:5437815] [DMG] { - [1722288460.742] [55752:5437815] [DMG] Endpoint = 0x1, - [1722288460.742] [55752:5437815] [DMG] Cluster = 0x201, - [1722288460.742] [55752:5437815] [DMG] Attribute = 0x0000_0050, - [1722288460.742] [55752:5437815] [DMG] ListIndex = Null, - [1722288460.742] [55752:5437815] [DMG] } - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] StatusIB = - [1722288460.742] [55752:5437815] [DMG] { - [1722288460.742] [55752:5437815] [DMG] status = 0x00 (SUCCESS), - [1722288460.742] [55752:5437815] [DMG] }, - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] }, - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] ], - [1722288460.742] [55752:5437815] [DMG] - [1722288460.742] [55752:5437815] [DMG] InteractionModelRevision = 11 - [1722288460.742] [55752:5437815] [DMG] } - [1722288460.742] [55752:5437815] [DMG] WriteClient moving to [AwaitingDe] - [1722288460.742] [55752:5437815] [EM] <<< [E:10991i S:19292 M:9249657 (Ack:153811994)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 4c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #4c Test Harness Client calls CommitPresetsSchedulesRequest command and gets UNSUPPORTED_ACCESS since a built-in preset was attempted to be removed. - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an UNSUPPORTED_ACCESS (0x7E) error - [1722288464.392] [55754:5437857] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x7e - [1722288464.392] [55754:5437857] [TOO] Error: IM Error 0x0000057E: General error: 0x7e (UNSUPPORTED_ACCESS) - [1722288464.392] [55754:5437857] [DMG] ICR moving to [AwaitingDe] - [1722288464.392] [55754:5437857] [EM] <<< [E:45905i S:14600 M:175519796 (Ack:248690311)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 5a: Test Harness calls the SetActivePresetRequest command to - set the active preset handle" - PICS: TSTAT.S.F08 && TSTAT.S.C06.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #5a Test Harness Client calls SetActivePresetRequest command to set the active preset handle - - ./chip-tool thermostat set-active-preset-request "hex:03" 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722292538.299] [58873:5523668] [TOO] Endpoint: 1 Cluster: 0x0000_0201 Attribute 0x0000_004E DataVersion: 3470253931 - [1722292538.300] [58873:5523668] [TOO] ActivePresetHandle: 03 - [1722292538.300] [58873:5523668] [EM] <<< [E:63772i S:58620 M:79797990 (Ack:248773669)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: "Step 5b: Test Harness reads the ActivePresetHandle attribute" - PICS: TSTAT.S.F08 && TSTAT.S.A004e - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #5b Test Harness Client reads ActivePresetHandle attribute - - ./chip-tool thermostat read active-preset-handle 0x12344321 1 - On TH(chip-tool) verify that DUT successfully read ActivePresetHandle - [1722299898.382] [62999:5632512] [TOO] Endpoint: 1 Cluster: 0x0000_0201 Attribute 0x0000_004E DataVersion: 3098962545 - [1722299898.382] [62999:5632512] [TOO] ActivePresetHandle: 03 - [1722299898.382] [62999:5632512] [EM] <<< [E:27648i S:55804 M:2686999 (Ack:191947351)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 5c: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #5b Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 5d: Test Harness writes to the Presets attribute without the - preset with handle hex:03 matching the ActivePresetHandle attribute - removed" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #5c Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets ./out/debug/chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 5e: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #5e Test Harness Client calls CommitPresetsSchedulesRequest command ans gets INVALID_IN_STATE since the preset with its handle matching the active preset handle was attempted to be removed. - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an INVALID_IN_STATE (0xCB) error - [1722293312.795] [59386:5538858] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0xcb - [1722293312.795] [59386:5538858] [TOO] Error: IM Error 0x000005CB: General error: 0xcb (INVALID_IN_STATE) - [1722293312.795] [59386:5538858] [DMG] ICR moving to [AwaitingDe] - [1722293312.795] [59386:5538858] [EM] <<< [E:4647i S:21966 M:58651952 (Ack:80870764)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 6a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #6a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 6b: Test Harness writes to the Presets attribute with a - built-in preset having preset handle hex:01 modified to be not - built-in." - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #6b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 6c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #6c Test Harness Client calls CommitPresetsSchedulesRequest command gets UNSUPPORTED_ACCESS since a built-in preset was attempted to be modified to a non built-in preset - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an UNSUPPORTED_ACCESS (0x7E) error - [1722289468.881] [56642:5458641] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x7e - [1722289468.881] [56642:5458641] [TOO] Error: IM Error 0x0000057E: General error: 0x7e (UNSUPPORTED_ACCESS) - [1722289468.881] [56642:5458641] [DMG] ICR moving to [AwaitingDe] - [1722289468.881] [56642:5458641] [EM] <<< [E:20464i S:35105 M:91065475 (Ack:114933900)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 7a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #6a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 7b: Test Harness writes to the Presets attribute with a new - preset having builtIn set to true" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #7b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": null, "name": "Vacation", "presetScenario": 5, "coolingSetpoint": 2900, "heatingSetpoint": 2000, "builtIn": true }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 7c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #6c Test Harness Client calls CommitPresetsSchedulesRequest command and gets CONSTRAINT_ERROR since a new preset was attempted to be added as a built-in preset. - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an CONSTRAINT_ERROR (0x87) error - [1722289998.305] [56996:5468872] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x87 - [1722289998.305] [56996:5468872] [TOO] Error: IM Error 0x00000587: General error: 0x87 (CONSTRAINT_ERROR) - [1722289998.305] [56996:5468872] [DMG] ICR moving to [AwaitingDe] - [1722289998.305] [56996:5468872] [EM] <<< [E:44500i S:62829 M:76436393 (Ack:145233702)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 8a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #8a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 8b: Test Harness writes to the Presets attribute with a preset - having preset handle hex:08 that doesn't exist in the Presets - attribute" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #8b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:08", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 8c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #8c Test Harness Client calls CommitPresetsSchedulesRequest command gets NOT_FOUND since an existing preset was attempted to be added with a preset handle that doesn't exist in the Presets attribute - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an NOT_FOUND (0x8B) error - [1722290436.980] [57434:5479429] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x8b - [1722290436.980] [57434:5479429] [TOO] Error: IM Error 0x0000058B: General error: 0x8b (NOT_FOUND) - [1722290436.980] [57434:5479429] [DMG] ICR moving to [AwaitingDe] - [1722290436.980] [57434:5479429] [EM] <<< [E:54210i S:10110 M:158287615 (Ack:73923062)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 9a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #9a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: "Step 9b: Test Harness writes to the Presets attribute" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #8b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 9c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #8c Test Harness Client calls CommitPresetsSchedulesRequest command gets CONSTRAINT_ERROR since preset with preset handle hex:03 is duplicated - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends a CONSTRAINT_ERROR (0x87) error - [1722302289.994] [63677:5670818] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x87 - [1722302289.994] [63677:5670818] [TOO] Error: IM Error 0x00000587: General error: 0x87 (CONSTRAINT_ERROR) - [1722302289.994] [63677:5670818] [DMG] ICR moving to [AwaitingDe] - [1722302289.994] [63677:5670818] [EM] <<< [E:25209i S:7768 M:264197735 (Ack:106550461)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 10a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #10a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 10b: Test Harness writes to the Presets attribute wherein a - built-in preset is modified to a non built-in preset" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #10b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 10c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #10c Test Harness Client calls CommitPresetsSchedulesRequest command gets UNSUPPORTED_ACCESS since built-in preset with handle hex:01 was attempted to be modified to a not built-in preset - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an UNSUPPORTED_ACCESS (0x7E) error - [1722289468.881] [56642:5458641] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x7e - [1722289468.881] [56642:5458641] [TOO] Error: IM Error 0x0000057E: General error: 0x7e (UNSUPPORTED_ACCESS) - [1722289468.881] [56642:5458641] [DMG] ICR moving to [AwaitingDe] - [1722289468.881] [56642:5458641] [EM] <<< [E:20464i S:35105 M:91065475 (Ack:114933900)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 11a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #11a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 11b: Test Harness writes to the Presets attribute wherein a non - built-in preset is modified to a built-in preset" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #11b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 11c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #11c Test Harness Client calls CommitPresetsSchedulesRequest command gets UNSUPPORTED_ACCESS since non built-in preset with handle hex:03 was attempted to be modified to be built-in - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an UNSUPPORTED_ACCESS (0x7E) error - [1722297542.066] [60654:5591651] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x7e - [1722297542.066] [60654:5591651] [TOO] Error: IM Error 0x0000057E: General error: 0x7e (UNSUPPORTED_ACCESS) - [1722297542.066] [60654:5591651] [DMG] ICR moving to [AwaitingDe] - [1722297542.066] [60654:5591651] [EM] <<< [E:11999i S:35595 M:148057801 (Ack:14642826)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 12a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #12a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 12b: Test Harness writes to the Presets attribute with a preset - that doesn't support names in the PresetTypeFeatures bitmap but has a - name" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #11b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "name": "Occupied", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "hex:03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }, {"presetHandle": "hex:06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 2100, "heatingSetpoint": 2500, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722289461.377] [56636:5458560] [EM] <<< [E:23635i S:58282 M:220756286 (Ack:5366080)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 12c: Test Harness calls the CommitPresetsSchedulesRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C09.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #11c Test Harness Client calls CommitPresetsSchedulesRequest command gets CONSTRAINT_ERROR since we attempted to add a name to a preset with handle hex:01 that doesn't support names. - - ./chip-tool thermostat commit-presets-schedules-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends an CONSTRAINT_ERROR (0x87) error - [1722298150.233] [60910:5602100] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x87 - [1722298150.233] [60910:5602100] [TOO] Error: IM Error 0x00000587: General error: 0x87 (CONSTRAINT_ERROR) - [1722298150.233] [60910:5602100] [DMG] ICR moving to [AwaitingDe] - [1722298150.233] [60910:5602100] [EM] <<< [E:44287i S:42687 M:5072557 (Ack:66989213)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - #TODO: Add tests for the total number of Presets exceeds the NumberOfPresets supported. Also Add tests for adding presets with preset scenario not present in PresetTypes. - - - label: - "Step 13a: Test Harness calls the StartPresetsSchedulesEditRequest - command to edit presets" - PICS: TSTAT.S.F08 && TSTAT.S.C07.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #13a Test Harness Client calls StartPresetsSchedulesEditRequest command - - ./chip-tool thermostat start-presets-schedules-edit-request 180 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722286001.805] [54149:5392862] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0007 Status=0x0 - [1722286001.805] [54149:5392862] [DMG] ICR moving to [AwaitingDe] - [1722286001.805] [54149:5392862] [EM] <<< [E:7545i S:16937 M:144975449 (Ack:93571372)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286001.806] [54149:5392862] [EM] Flushed pending ack for MessageCounter:93571372 on exchange 7545i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 13b: Test Harness writes to the Presets attribute but calls - CancelPresetsSchedulesEditRequest command to cancel the edit request" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #13b Test Harness Client attempts to write Presets and gets SUCCESS - - ./chip-tool thermostat write presets '[ {"presetHandle": "hex:01", "presetScenario": 1, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": true }, {"presetHandle": "hex:02", "presetScenario": 2, "coolingSetpoint": 2600, "heatingSetpoint": 2500, "builtIn": true }, {"presetHandle": "03", "name": "Sleep", "presetScenario": 3, "coolingSetpoint": 2500, "heatingSetpoint": 2600, "builtIn": false }, {"presetHandle": "04", "name": "Wake", "presetScenario": 4, "coolingSetpoint": 2200, "heatingSetpoint": 2900, "builtIn": false }, {"presetHandle": null, "name": "Vacation", "presetScenario": 5, "coolingSetpoint": 2900, "heatingSetpoint": 2000, "builtIn": false }, {"presetHandle": "06", "name": "GoingToSleep", "presetScenario": 6, "coolingSetpoint": 3000, "heatingSetpoint": 1900, "builtIn": false }]' 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722289461.376] [56636:5458560] [DMG] WriteClient moving to [ResponseRe] - [1722289461.376] [56636:5458560] [DMG] WriteResponseMessage = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIBs = - [1722289461.376] [56636:5458560] [DMG] [ - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.376] [56636:5458560] [DMG] } - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] StatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] }, - [1722289461.376] [56636:5458560] [DMG] - [1722289461.376] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] AttributePathIB = - [1722289461.376] [56636:5458560] [DMG] { - [1722289461.376] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.376] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.376] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.376] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] AttributeStatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] AttributePathIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] Endpoint = 0x1, - [1722289461.377] [56636:5458560] [DMG] Cluster = 0x201, - [1722289461.377] [56636:5458560] [DMG] Attribute = 0x0000_0050, - [1722289461.377] [56636:5458560] [DMG] ListIndex = Null, - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] StatusIB = - [1722289461.377] [56636:5458560] [DMG] { - [1722289461.377] [56636:5458560] [DMG] status = 0x00 (SUCCESS), - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] }, - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] ], - [1722289461.377] [56636:5458560] [DMG] - [1722289461.377] [56636:5458560] [DMG] InteractionModelRevision = 11 - [1722289461.377] [56636:5458560] [DMG] } - [1722289461.377] [56636:5458560] [DMG] WriteClient moving to [AwaitingDe] - [1722286250.504] [54321:5397545] [EM] <<< [E:14426i S:42250 M:116961408 (Ack:156984778)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - [1722286250.504] [54321:5397545] [EM] Flushed pending ack for MessageCounter:156984778 on exchange 14426i - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 13c: Test Harness calls the CancelPresetsSchedulesEditRequest - command" - PICS: TSTAT.S.F08 && TSTAT.S.C08.Rsp - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #13c Test Harness Client calls CancelPresetsSchedulesEditRequest command - - ./chip-tool thermostat cancel-presets-schedules-edit-request 0x12344321 1 - On TH(chip-tool) verify that DUT sends a success response - [1722287841.505] [55282:5425045] [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0201 Command=0x0000_0009 Status=0x0 - [1722287841.505] [55282:5425045] [DMG] ICR moving to [AwaitingDe] - [1722287841.505] [55282:5425045] [EM] <<< [E:46441i S:57071 M:61366563 (Ack:138534230)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y" - - - label: - "Step 13d: Test Harness reads the Presets attribute after calling the - CancelPresetsSchedulesEditRequest command" - PICS: TSTAT.S.F08 && TSTAT.S.A0050 - verification: | - Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE. Below is the log of RPI the result may be vary on the basis of dut implementation. - - #3c Test Harness Client reads Presets attribute - - ./chip-tool thermostat read presets 0x12344321 1 - On TH(chip-tool) verify that DUT successfully read Presets (but without the Vacation preset added) - [1722299465.497] [62905:5625656] [TOO] Endpoint: 1 Cluster: 0x0000_0201 Attribute 0x0000_0050 DataVersion: 3098962545 - [1722299465.497] [62905:5625656] [TOO] Presets: 5 entries - [1722299465.498] [62905:5625656] [TOO] [1]: { - [1722299465.498] [62905:5625656] [TOO] PresetHandle: 01 - [1722299465.498] [62905:5625656] [TOO] PresetScenario: 1 - [1722299465.498] [62905:5625656] [TOO] CoolingSetpoint: 2500 - [1722299465.498] [62905:5625656] [TOO] HeatingSetpoint: 2600 - [1722299465.498] [62905:5625656] [TOO] BuiltIn: TRUE - [1722299465.498] [62905:5625656] [TOO] } - [1722299465.498] [62905:5625656] [TOO] [2]: { - [1722299465.498] [62905:5625656] [TOO] PresetHandle: 02 - [1722299465.498] [62905:5625656] [TOO] PresetScenario: 2 - [1722299465.498] [62905:5625656] [TOO] CoolingSetpoint: 2600 - [1722299465.498] [62905:5625656] [TOO] HeatingSetpoint: 2500 - [1722299465.498] [62905:5625656] [TOO] BuiltIn: TRUE - [1722299465.498] [62905:5625656] [TOO] } - [1722299465.498] [62905:5625656] [TOO] [3]: { - [1722299465.498] [62905:5625656] [TOO] PresetHandle: 03 - [1722299465.498] [62905:5625656] [TOO] PresetScenario: 3 - [1722299465.498] [62905:5625656] [TOO] Name: Sleep - [1722299465.498] [62905:5625656] [TOO] CoolingSetpoint: 2500 - [1722299465.498] [62905:5625656] [TOO] HeatingSetpoint: 2600 - [1722299465.498] [62905:5625656] [TOO] BuiltIn: FALSE - [1722299465.498] [62905:5625656] [TOO] } - [1722299465.498] [62905:5625656] [TOO] [4]: { - [1722299465.498] [62905:5625656] [TOO] PresetHandle: 04 - [1722299465.498] [62905:5625656] [TOO] PresetScenario: 4 - [1722299465.498] [62905:5625656] [TOO] Name: Wake - [1722299465.498] [62905:5625656] [TOO] CoolingSetpoint: 2200 - [1722299465.498] [62905:5625656] [TOO] HeatingSetpoint: 2900 - [1722299465.498] [62905:5625656] [TOO] BuiltIn: FALSE - [1722299465.498] [62905:5625656] [TOO] } - [1722299465.498] [62905:5625656] [TOO] [5]: { - [1722299465.498] [62905:5625656] [TOO] PresetHandle: 06 - [1722299465.498] [62905:5625656] [TOO] PresetScenario: 6 - [1722299465.498] [62905:5625656] [TOO] Name: Vacationleep - [1722299465.498] [62905:5625656] [TOO] CoolingSetpoint: 2100 - [1722299465.498] [62905:5625656] [TOO] HeatingSetpoint: 2500 - [1722299465.498] [62905:5625656] [TOO] BuiltIn: FALSE - [1722299465.498] [62905:5625656] [TOO] } - [1722299465.498] [62905:5625656] [EM] <<< [E:53084i S:11903 M:249395534 (Ack:245071987)] (S) Msg TX to 1:000000000000006E [FEC4] [UDP:[fe80::1%lo0]:5540] --- Type 0000:10 (SecureChannel:StandaloneAck) (B:34) - cluster: "LogCommands" - command: "UserPrompt" - arguments: - values: - - name: "message" - value: "Please enter 'y' after success" - - name: "expectedValue" - value: "y"