diff --git a/src/platform/silabs/BLEManagerImpl.h b/src/platform/silabs/BLEManagerImpl.h
index 29be7edab47205..b13f9fb2901603 100644
--- a/src/platform/silabs/BLEManagerImpl.h
+++ b/src/platform/silabs/BLEManagerImpl.h
@@ -25,7 +25,7 @@
 #pragma once
 #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
 
-#ifdef BLE_ENABLE
+#if (BLE_ENABLE || RSI_BLE_ENABLE)
 #define BLE_MIN_CONNECTION_INTERVAL_MS 45 // 45 msec
 #define BLE_MAX_CONNECTION_INTERVAL_MS 45 // 45 msec
 #define BLE_SLAVE_LATENCY_MS 0
@@ -33,7 +33,7 @@
 #endif // RSI_BLE_ENABLE
 #include "FreeRTOS.h"
 #include "timers.h"
-#ifdef BLE_ENABLE
+#if (BLE_ENABLE || RSI_BLE_ENABLE)
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -64,7 +64,7 @@ class BLEManagerImpl final : public BLEManager, private BleLayer, private BlePla
 public:
     void HandleBootEvent(void);
 
-#ifdef BLE_ENABLE
+#if (BLE_ENABLE || RSI_BLE_ENABLE)
     void HandleConnectEvent(void);
     void HandleConnectionCloseEvent(uint16_t reason);
     void HandleWriteEvent(rsi_ble_event_write_t evt);
@@ -81,12 +81,12 @@ class BLEManagerImpl final : public BLEManager, private BleLayer, private BlePla
     void HandleTxConfirmationEvent(BLE_CONNECTION_OBJECT conId);
     void HandleTXCharCCCDWrite(volatile sl_bt_msg_t * evt);
     void HandleSoftTimerEvent(volatile sl_bt_msg_t * evt);
-#endif // RSI_BLE_ENABLE
+#endif // RSI_BLE_ENABLEHandleConnectEvent
     CHIP_ERROR StartAdvertising(void);
     CHIP_ERROR StopAdvertising(void);
 
 #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
-#ifdef BLE_ENABLE
+#if (BLE_ENABLE || RSI_BLE_ENABLE)
     static void HandleC3ReadRequest(void);
 #else
 #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
@@ -163,7 +163,7 @@ class BLEManagerImpl final : public BLEManager, private BleLayer, private BlePla
 
     struct CHIPoBLEConState
     {
-#ifndef BLE_ENABLE
+#if !(BLE_ENABLE || RSI_BLE_ENABLE)
         bd_addr address;
 #endif
         uint16_t mtu : 10;
@@ -192,7 +192,7 @@ class BLEManagerImpl final : public BLEManager, private BleLayer, private BlePla
     CHIP_ERROR EncodeAdditionalDataTlv();
 #endif
 
-#ifdef BLE_ENABLE
+#if (BLE_ENABLE || RSI_BLE_ENABLE)
     void HandleRXCharWrite(rsi_ble_event_write_t * evt);
 #else
     void HandleRXCharWrite(volatile sl_bt_msg_t * evt);
diff --git a/src/platform/silabs/rs911x/rsi_ble_config.h b/src/platform/silabs/rs911x/rsi_ble_config.h
new file mode 100644
index 00000000000000..e733baed4c3f2f
--- /dev/null
+++ b/src/platform/silabs/rs911x/rsi_ble_config.h
@@ -0,0 +1,259 @@
+/*******************************************************************************
+ * @file  rsi_ble_config.h
+ * @brief
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * The licensor of this software is Silicon Laboratories Inc. Your use of this
+ * software is governed by the terms of Silicon Labs Master Software License
+ * Agreement (MSLA) available at
+ * www.silabs.com/about-us/legal/master-software-license-agreement. This
+ * software is distributed to you in Source Code format and is governed by the
+ * sections of the MSLA applicable to Source Code.
+ *
+ ******************************************************************************/
+
+#ifndef RSI_BLE_CONFIG_H
+#define RSI_BLE_CONFIG_H
+
+#include "rsi_ble_apis.h"
+#include <rsi_data_types.h>
+/******************************************************
+ * *                      Macros
+ * ******************************************************/
+//! application event list
+// TODO: remove this define after integration of the new wifi sdk
+#ifndef RSI_FAILURE
+// failure return value
+#define RSI_FAILURE -1
+#endif
+
+#define RSI_BLE_CONN_EVENT (0x01)
+#define RSI_BLE_DISCONN_EVENT (0x02)
+#define RSI_BLE_GATT_WRITE_EVENT (0x03)
+#define RSI_BLE_MTU_EVENT (0x04)
+#define RSI_BLE_GATT_INDICATION_CONFIRMATION (0x05)
+#define RSI_BLE_RESP_ATT_VALUE (0x06)
+#define RSI_SSID (0x0D)
+#define RSI_SECTYPE (0x0E)
+#define RSI_BLE_WLAN_DISCONN_NOTIFY (0x0F)
+#define RSI_WLAN_ALREADY (0x10)
+#define RSI_WLAN_NOT_ALREADY (0x11)
+#define RSI_BLE_WLAN_TIMEOUT_NOTIFY (0x12)
+#define RSI_BLE_WLAN_JOIN_STATUS (0x15)
+#define RSI_APP_FW_VERSION (0x13)
+#define RSI_BLE_WLAN_DISCONNECT_STATUS (0x14)
+
+#define RSI_REM_DEV_ADDR_LEN (18)
+#define RSI_REM_DEV_NAME_LEN (31)
+
+#define RSI_BLE_DEV_NAME "CCP_DEVICE"
+#define RSI_BLE_SET_RAND_ADDR "00:23:A7:12:34:56"
+
+#define CLEAR_WHITELIST (0x00)
+#define ADD_DEVICE_TO_WHITELIST (0x01)
+#define DELETE_DEVICE_FROM_WHITELIST (0x02)
+
+#define ALL_PHYS (0x00)
+
+#define RSI_BLE_DEV_ADDR_RESOLUTION_ENABLE (0)
+
+#define RSI_OPERMODE_WLAN_BLE (13)
+
+/***********************************************************************************************************************************************/
+//! Characteristic Presenatation Format Fields
+/***********************************************************************************************************************************************/
+#define RSI_BLE_UINT8_FORMAT (0x04)
+#define RSI_BLE_EXPONENT (0x00)
+#define RSI_BLE_PERCENTAGE_UNITS_UUID (0x27AD)
+#define RSI_BLE_NAME_SPACE (0x01)
+#define RSI_BLE_DESCRIPTION (0x010B)
+
+//! BLE characteristic custom service uuid
+#define RSI_BLE_CUSTOM_SERVICE_UUID (0xFFF6)
+#define RSI_BLE_CUSTOM_LEVEL_UUID (0x1FF1)
+
+#ifdef RSI_M4_INTERFACE
+#define RSI_BLE_MAX_NBR_ATT_REC (20)
+#define RSI_BLE_MAX_NBR_SLAVES (1)
+#define RSI_BLE_NUM_CONN_EVENTS (2)
+#else
+#define RSI_BLE_MAX_NBR_ATT_REC (80)
+#define RSI_BLE_MAX_NBR_SLAVES (3)
+#define RSI_BLE_NUM_CONN_EVENTS (20)
+#endif
+
+#define RSI_BLE_MAX_NBR_ATT_SERV (10)
+
+#define RSI_BLE_MAX_NBR_MASTERS (1)
+#define RSI_BLE_GATT_ASYNC_ENABLE (1)
+#define RSI_BLE_GATT_INIT (0)
+
+#define RSI_BLE_START_SCAN (0x01)
+#define RSI_BLE_STOP_SCAN (0x00)
+
+#define RSI_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
+#define RSI_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL
+/* Number of BLE GATT RECORD SIZE IN (n*16 BYTES), eg:(0x40*16)=1024 bytes */
+#define RSI_BLE_NUM_REC_BYTES (0x40)
+
+#define RSI_BLE_INDICATE_CONFIRMATION_FROM_HOST (0)
+
+/*=======================================================================*/
+//! Advertising command parameters
+/*=======================================================================*/
+
+#define RSI_BLE_ADV_TYPE UNDIR_CONN
+#define RSI_BLE_ADV_FILTER_TYPE ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY
+#define RSI_BLE_ADV_DIR_ADDR_TYPE LE_PUBLIC_ADDRESS
+#define RSI_BLE_ADV_DIR_ADDR "00:15:83:6A:64:17"
+
+//! Reduced the BLE adv interval time to match with EFR BLE
+#define RSI_BLE_ADV_INT_MIN (0x20)
+#define RSI_BLE_ADV_INT_MAX (0x20)
+
+#define RSI_BLE_ADV_CHANNEL_MAP (0x07)
+
+//! Advertise status
+//!  Start the advertising process
+#define RSI_BLE_START_ADV (0x01)
+//! Stop the advertising process
+#define RSI_BLE_STOP_ADV (0x00)
+
+//! BLE Tx Power Index On Air
+#define RSI_BLE_PWR_INX (30)
+
+//! BLE Active H/w Pwr Features
+#define BLE_DISABLE_DUTY_CYCLING (0)
+#define BLE_DUTY_CYCLING (1)
+#define BLR_DUTY_CYCLING (2)
+#define BLE_4X_PWR_SAVE_MODE (4)
+#define RSI_BLE_PWR_SAVE_OPTIONS BLE_DISABLE_DUTY_CYCLING
+
+//! Advertise types
+
+/* Advertising will be visible(discoverable) to all the devices.
+ * Scanning/Connection is also accepted from all devices
+ * */
+#define UNDIR_CONN (0x80)
+
+/* Advertising will be visible(discoverable) to the particular device
+ * mentioned in RSI_BLE_ADV_DIR_ADDR only.
+ * Scanning and Connection will be accepted from that device only.
+ * */
+#define DIR_CONN (0x81)
+
+/* Advertising will be visible(discoverable) to all the devices.
+ * Scanning will be accepted from all the devices.
+ * Connection will be not be accepted from any device.
+ * */
+#define UNDIR_SCAN (0x82)
+
+/* Advertising will be visible(discoverable) to all the devices.
+ * Scanning and Connection will not be accepted from any device
+ * */
+#define UNDIR_NON_CONN (0x83)
+
+/* Advertising will be visible(discoverable) to the particular device
+ * mentioned in RSI_BLE_ADV_DIR_ADDR only.
+ * Scanning and Connection will be accepted from that device only.
+ * */
+#define DIR_CONN_LOW_DUTY_CYCLE (0x84)
+
+//! Advertising flags
+#define LE_LIMITED_DISCOVERABLE (0x01)
+#define LE_GENERAL_DISCOVERABLE (0x02)
+#define LE_BR_EDR_NOT_SUPPORTED (0x04)
+
+//! Advertise filters
+#define ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY (0x00)
+#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_ANY (0x01)
+#define ALLOW_SCAN_REQ_ANY_CONN_REQ_WHITE_LIST (0x02)
+#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_WHITE_LIST (0x03)
+
+//! Address types
+#define LE_PUBLIC_ADDRESS (0x00)
+#define LE_RANDOM_ADDRESS (0x01)
+#define LE_RESOLVABLE_PUBLIC_ADDRESS (0x02)
+#define LE_RESOLVABLE_RANDOM_ADDRESS (0x03)
+
+/*=======================================================================*/
+
+/*=======================================================================*/
+//! Connection parameters
+/*=======================================================================*/
+#define LE_SCAN_INTERVAL (0x0100)
+#define LE_SCAN_WINDOW (0x0050)
+
+#define CONNECTION_INTERVAL_MIN (0x00A0)
+#define CONNECTION_INTERVAL_MAX (0x00A0)
+
+#define CONNECTION_LATENCY (0x0000)
+#define SUPERVISION_TIMEOUT (0x07D0) // 2000
+
+/*=======================================================================*/
+
+/*=======================================================================*/
+//! Scan command parameters
+/*=======================================================================*/
+
+#define SL_WFX_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
+#define SL_WFX_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL
+
+//! Scan status
+#define SL_WFX_BLE_START_SCAN (0x01)
+#define SL_WFX_BLE_STOP_SCAN (0x00)
+
+//! Scan types
+#define SCAN_TYPE_ACTIVE (0x01)
+#define SCAN_TYPE_PASSIVE (0x00)
+
+//! Scan filters
+#define SCAN_FILTER_TYPE_ALL (0x00)
+#define SCAN_FILTER_TYPE_ONLY_WHITE_LIST (0x01)
+
+#define SL_WFX_SEL_INTERNAL_ANTENNA (0x00)
+#define SL_WFX_SEL_EXTERNAL_ANTENNA (0x01)
+
+#define SL_WFX_BT_CTRL_REMOTE_USER_TERMINATED (0x4E13)
+#define SL_WFX_BT_CTRL_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES (0x4E14)
+#define SL_WFX_BT_CTRL_REMOTE_POWERING_OFF (0x4E15)
+#define SL_WFX_BT_CTRL_TERMINATED_MIC_FAILURE (0x4E3D)
+#define SL_WFX_BT_FAILED_TO_ESTABLISH_CONN (0x4E3E)
+#define SL_WFX_BT_INVALID_RANGE (0x4E60)
+
+/***********************************************************************************************************************************************/
+//! RS9116 Firmware Configurations
+/***********************************************************************************************************************************************/
+/*=======================================================================*/
+//! Power save command parameters
+/*=======================================================================*/
+//! set handshake type of power mode
+#define RSI_HAND_SHAKE_TYPE GPIO_BASED
+
+#define BLE_ATT_REC_SIZE (500)
+#define NO_OF_VAL_ATT (5) //! Attribute value count
+
+/***********************************************************************************************************************************************/
+//! user defined structure
+/***********************************************************************************************************************************************/
+typedef struct rsi_ble_att_list_s
+{
+    uuid_t char_uuid;
+    uint16_t handle;
+    uint16_t value_len;
+    uint16_t max_value_len;
+    uint8_t char_val_prop;
+    void * value;
+} rsi_ble_att_list_t;
+typedef struct rsi_ble_s
+{
+    uint8_t DATA[BLE_ATT_REC_SIZE];
+    uint16_t DATA_ix;
+    uint16_t att_rec_list_count;
+    rsi_ble_att_list_t att_rec_list[NO_OF_VAL_ATT];
+} rsi_ble_t;
+
+#endif
\ No newline at end of file