Skip to content

Latest commit

 

History

History
23 lines (14 loc) · 838 Bytes

programming-uniflash.md

File metadata and controls

23 lines (14 loc) · 838 Bytes
Raw

Programming with UniFlash

  • Download and install UniFlash.

  • Select the Device Detect option. Then select the device you wish to program. Or you can create a new configuration if you know the debugger serial number

    UniFlash step 1

  • Browse for your build image by clicking the Browse button. It will be at ${connectedhomeip}/examples/lock-app/cc13x2_26x2/out/debug/chip-cc13x2_26x2-lock-example.out

    UniFlash step 2

  • Load the image by clicking the Load Image button. This will eventually result in a success message in the console below.

    UniFlash step 3

  • Open a terminal to the XDS110 User UART and interact with the example application.