diff --git a/CMakeLists.txt b/CMakeLists.txt
index 56d0b052aef..879887c1829 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -478,14 +478,6 @@ else ()
     message (STATUS "Set jemalloc narenas ${JEMALLOC_NARENAS}")
 endif ()
 
-# Flags for test coverage
-option (TEST_COVERAGE "Enables flags for test coverage" OFF)
-option (TEST_COVERAGE_XML "Output XML report for test coverage" OFF)
-if (TEST_COVERAGE AND CMAKE_BUILD_TYPE_UC STREQUAL "DEBUG")
-    include(CodeCoverage)
-    set (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage")
-endif ()
-
 option (TEST_LLVM_COVERAGE "Enables flags for test coverage" OFF)
 if (TEST_LLVM_COVERAGE AND CMAKE_BUILD_TYPE_UC STREQUAL "DEBUG")
     set (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -fprofile-instr-generate -fcoverage-mapping -DTIFLASH_LLVM_COVERAGE=1")
diff --git a/cmake/Modules/CodeCoverage.cmake b/cmake/Modules/CodeCoverage.cmake
deleted file mode 100644
index 28ad3fc587a..00000000000
--- a/cmake/Modules/CodeCoverage.cmake
+++ /dev/null
@@ -1,705 +0,0 @@
-# Copyright 2022 PingCAP, Ltd.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Copyright (c) 2012 - 2017, Lars Bilke
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this
-#    list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice,
-#    this list of conditions and the following disclaimer in the documentation
-#    and/or other materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors
-#    may be used to endorse or promote products derived from this software without
-#    specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-# CHANGES:
-#
-# 2012-01-31, Lars Bilke
-# - Enable Code Coverage
-#
-# 2013-09-17, Joakim Söderberg
-# - Added support for Clang.
-# - Some additional usage instructions.
-#
-# 2016-02-03, Lars Bilke
-# - Refactored functions to use named parameters
-#
-# 2017-06-02, Lars Bilke
-# - Merged with modified version from github.com/ufz/ogs
-#
-# 2019-05-06, Anatolii Kurotych
-# - Remove unnecessary --coverage flag
-#
-# 2019-12-13, FeRD (Frank Dana)
-# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
-#   of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
-# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
-# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
-# - Set lcov basedir with -b argument
-# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
-#   overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
-# - Delete output dir, .info file on 'make clean'
-# - Remove Python detection, since version mismatches will break gcovr
-# - Minor cleanup (lowercase function names, update examples...)
-#
-# 2019-12-19, FeRD (Frank Dana)
-# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
-#
-# 2020-01-19, Bob Apthorpe
-# - Added gfortran support
-#
-# 2020-02-17, FeRD (Frank Dana)
-# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
-#   in EXCLUDEs, and remove manual escaping from gcovr targets
-#
-# 2021-01-19, Robin Mueller
-# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
-# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
-#   flags to the gcovr command
-#
-# 2020-05-04, Mihchael Davis
-#     - Add -fprofile-abs-path to make gcno files contain absolute paths
-#     - Fix BASE_DIRECTORY not working when defined
-#     - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
-#
-# 2021-05-10, Martin Stump
-#     - Check if the generator is multi-config before warning about non-Debug builds
-#
-# USAGE:
-#
-# 1. Copy this file into your cmake modules path.
-#
-# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
-#    using a CMake option() to enable it just optionally):
-#      include(CodeCoverage)
-#
-# 3. Append necessary compiler flags:
-#      append_coverage_compiler_flags()
-#
-# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
-#
-# 4. If you need to exclude additional directories from the report, specify them
-#    using full paths in the COVERAGE_EXCLUDES variable before calling
-#    setup_target_for_coverage_*().
-#    Example:
-#      set(COVERAGE_EXCLUDES
-#          '${PROJECT_SOURCE_DIR}/src/dir1/*'
-#          '/path/to/my/src/dir2/*')
-#    Or, use the EXCLUDE argument to setup_target_for_coverage_*().
-#    Example:
-#      setup_target_for_coverage_lcov(
-#          NAME coverage
-#          EXECUTABLE testrunner
-#          EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
-#
-# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
-#     relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
-#     Example:
-#       set(COVERAGE_EXCLUDES "dir1/*")
-#       setup_target_for_coverage_gcovr_html(
-#           NAME coverage
-#           EXECUTABLE testrunner
-#           BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
-#           EXCLUDE "dir2/*")
-#
-# 5. Use the functions described below to create a custom make target which
-#    runs your test executable and produces a code coverage report.
-#
-# 6. Build a Debug build:
-#      cmake -DCMAKE_BUILD_TYPE=Debug ..
-#      make
-#      make my_coverage_target
-#
-
-include(CMakeParseArguments)
-
-option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
-
-# Check prereqs
-find_program( GCOV_PATH gcov )
-find_program( LCOV_PATH  NAMES lcov lcov.bat lcov.exe lcov.perl)
-find_program( FASTCOV_PATH NAMES fastcov fastcov.py )
-find_program( GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat )
-find_program( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/scripts/test)
-find_program( CPPFILT_PATH NAMES c++filt )
-
-if(NOT GCOV_PATH)
-    message(FATAL_ERROR "gcov not found! Aborting...")
-endif() # NOT GCOV_PATH
-
-set(COVERAGE_COMPILER_FLAGS "-g -fprofile-arcs -ftest-coverage"
-        CACHE INTERNAL "")
-if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
-    include(CheckCXXCompilerFlag)
-    check_cxx_compiler_flag(-fprofile-abs-path HAVE_fprofile_abs_path)
-    if(HAVE_fprofile_abs_path)
-        set(COVERAGE_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
-    endif()
-endif()
-
-set(CMAKE_Fortran_FLAGS_COVERAGE
-        ${COVERAGE_COMPILER_FLAGS}
-        CACHE STRING "Flags used by the Fortran compiler during coverage builds."
-        FORCE )
-set(CMAKE_CXX_FLAGS_COVERAGE
-        ${COVERAGE_COMPILER_FLAGS}
-        CACHE STRING "Flags used by the C++ compiler during coverage builds."
-        FORCE )
-set(CMAKE_C_FLAGS_COVERAGE
-        ${COVERAGE_COMPILER_FLAGS}
-        CACHE STRING "Flags used by the C compiler during coverage builds."
-        FORCE )
-set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
-        ""
-        CACHE STRING "Flags used for linking binaries during coverage builds."
-        FORCE )
-set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
-        ""
-        CACHE STRING "Flags used by the shared libraries linker during coverage builds."
-        FORCE )
-mark_as_advanced(
-        CMAKE_Fortran_FLAGS_COVERAGE
-        CMAKE_CXX_FLAGS_COVERAGE
-        CMAKE_C_FLAGS_COVERAGE
-        CMAKE_EXE_LINKER_FLAGS_COVERAGE
-        CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
-
-get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
-if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
-    message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
-endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
-
-if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
-    link_libraries(gcov)
-endif()
-
-# Defines a target for running and collection code coverage information
-# Builds dependencies, runs the given executable and outputs reports.
-# NOTE! The executable should always have a ZERO as exit code otherwise
-# the coverage generation will not complete.
-#
-# setup_target_for_coverage_lcov(
-#     NAME testrunner_coverage                    # New target name
-#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
-#     DEPENDENCIES testrunner                     # Dependencies to build first
-#     BASE_DIRECTORY "../"                        # Base directory for report
-#                                                 #  (defaults to PROJECT_SOURCE_DIR)
-#     EXCLUDE "src/dir1/*" "src/dir2/*"           # Patterns to exclude (can be relative
-#                                                 #  to BASE_DIRECTORY, with CMake 3.4+)
-#     NO_DEMANGLE                                 # Don't demangle C++ symbols
-#                                                 #  even if c++filt is found
-# )
-function(setup_target_for_coverage_lcov)
-
-    set(options NO_DEMANGLE)
-    set(oneValueArgs BASE_DIRECTORY NAME)
-    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES LCOV_ARGS GENHTML_ARGS)
-    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-    if(NOT LCOV_PATH)
-        message(FATAL_ERROR "lcov not found! Aborting...")
-    endif() # NOT LCOV_PATH
-
-    if(NOT GENHTML_PATH)
-        message(FATAL_ERROR "genhtml not found! Aborting...")
-    endif() # NOT GENHTML_PATH
-
-    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
-    if(DEFINED Coverage_BASE_DIRECTORY)
-        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
-    else()
-        set(BASEDIR ..)
-    endif()
-
-    # Collect excludes (CMake 3.4+: Also compute absolute paths)
-    set(LCOV_EXCLUDES "")
-    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_LCOV_EXCLUDES})
-        if(CMAKE_VERSION VERSION_GREATER 3.4)
-            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
-        endif()
-        list(APPEND LCOV_EXCLUDES "${EXCLUDE}")
-    endforeach()
-    list(REMOVE_DUPLICATES LCOV_EXCLUDES)
-
-    # Conditional arguments
-    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
-        set(GENHTML_EXTRA_ARGS "--demangle-cpp")
-    endif()
-
-    # Setting up commands which will be run to generate coverage data.
-    # Cleanup lcov
-    set(LCOV_CLEAN_CMD
-            ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -directory ..
-            -b ${BASEDIR} --zerocounters
-            )
-    # Create baseline to make sure untouched files show up in the report
-    set(LCOV_BASELINE_CMD
-            ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -c -i -d .. -b
-            ${BASEDIR} -o ${Coverage_NAME}.base
-            )
-    # Run tests
-    set(LCOV_EXEC_TESTS_CMD
-            ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
-            )
-    # Capturing lcov counters and generating report
-    set(LCOV_CAPTURE_CMD
-            ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --directory .. -b
-            ${BASEDIR} --capture --output-file ${Coverage_NAME}.capture
-            )
-    # add baseline counters
-    set(LCOV_BASELINE_COUNT_CMD
-            ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base
-            -a ${Coverage_NAME}.capture --output-file ${Coverage_NAME}.total
-            )
-    # filter collected data to final coverage report
-    set(LCOV_FILTER_CMD
-            ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --remove
-            ${Coverage_NAME}.total ${LCOV_EXCLUDES} --output-file ${Coverage_NAME}.info
-            )
-    # Generate HTML output
-    set(LCOV_GEN_HTML_CMD
-            ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS} -o
-            ${Coverage_NAME} ${Coverage_NAME}.info
-            )
-
-
-    if(CODE_COVERAGE_VERBOSE)
-        message(STATUS "Executed command report")
-        message(STATUS "Command to clean up lcov: ")
-        string(REPLACE ";" " " LCOV_CLEAN_CMD_SPACED "${LCOV_CLEAN_CMD}")
-        message(STATUS "${LCOV_CLEAN_CMD_SPACED}")
-
-        message(STATUS "Command to create baseline: ")
-        string(REPLACE ";" " " LCOV_BASELINE_CMD_SPACED "${LCOV_BASELINE_CMD}")
-        message(STATUS "${LCOV_BASELINE_CMD_SPACED}")
-
-        message(STATUS "Command to run the tests: ")
-        string(REPLACE ";" " " LCOV_EXEC_TESTS_CMD_SPACED "${LCOV_EXEC_TESTS_CMD}")
-        message(STATUS "${LCOV_EXEC_TESTS_CMD_SPACED}")
-
-        message(STATUS "Command to capture counters and generate report: ")
-        string(REPLACE ";" " " LCOV_CAPTURE_CMD_SPACED "${LCOV_CAPTURE_CMD}")
-        message(STATUS "${LCOV_CAPTURE_CMD_SPACED}")
-
-        message(STATUS "Command to add baseline counters: ")
-        string(REPLACE ";" " " LCOV_BASELINE_COUNT_CMD_SPACED "${LCOV_BASELINE_COUNT_CMD}")
-        message(STATUS "${LCOV_BASELINE_COUNT_CMD_SPACED}")
-
-        message(STATUS "Command to filter collected data: ")
-        string(REPLACE ";" " " LCOV_FILTER_CMD_SPACED "${LCOV_FILTER_CMD}")
-        message(STATUS "${LCOV_FILTER_CMD_SPACED}")
-
-        message(STATUS "Command to generate lcov HTML output: ")
-        string(REPLACE ";" " " LCOV_GEN_HTML_CMD_SPACED "${LCOV_GEN_HTML_CMD}")
-        message(STATUS "${LCOV_GEN_HTML_CMD_SPACED}")
-    endif()
-
-    # Setup target
-    add_custom_target(${Coverage_NAME}
-            COMMAND ${LCOV_CLEAN_CMD}
-            COMMAND ${LCOV_BASELINE_CMD}
-            COMMAND ${LCOV_EXEC_TESTS_CMD}
-            COMMAND ${LCOV_CAPTURE_CMD}
-            COMMAND ${LCOV_BASELINE_COUNT_CMD}
-            COMMAND ${LCOV_FILTER_CMD}
-            COMMAND ${LCOV_GEN_HTML_CMD}
-
-            # Set output files as GENERATED (will be removed on 'make clean')
-            BYPRODUCTS
-            ${Coverage_NAME}.base
-            ${Coverage_NAME}.capture
-            ${Coverage_NAME}.total
-            ${Coverage_NAME}.info
-            ${Coverage_NAME}/index.html
-            WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-            DEPENDS ${Coverage_DEPENDENCIES}
-            VERBATIM # Protect arguments to commands
-            COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
-            )
-
-    # Show where to find the lcov info report
-    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
-            COMMAND ;
-            COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.info."
-            )
-
-    # Show info where to find the report
-    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
-            COMMAND ;
-            COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
-            )
-
-endfunction() # setup_target_for_coverage_lcov
-
-# Defines a target for running and collection code coverage information
-# Builds dependencies, runs the given executable and outputs reports.
-# NOTE! The executable should always have a ZERO as exit code otherwise
-# the coverage generation will not complete.
-#
-# setup_target_for_coverage_gcovr_xml(
-#     NAME ctest_coverage                    # New target name
-#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
-#     DEPENDENCIES executable_target         # Dependencies to build first
-#     BASE_DIRECTORY "../"                   # Base directory for report
-#                                            #  (defaults to PROJECT_SOURCE_DIR)
-#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
-#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
-# )
-# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
-# GCVOR command.
-function(setup_target_for_coverage_gcovr_xml)
-
-    set(options NONE)
-    set(oneValueArgs BASE_DIRECTORY NAME)
-    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
-    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-    if(NOT GCOVR_PATH)
-        message(FATAL_ERROR "gcovr not found! Aborting...")
-    endif() # NOT GCOVR_PATH
-
-    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
-    if(DEFINED Coverage_BASE_DIRECTORY)
-        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
-    else()
-        set(BASEDIR ..)
-    endif()
-
-    # Collect excludes (CMake 3.4+: Also compute absolute paths)
-    set(GCOVR_EXCLUDES "")
-    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
-        if(CMAKE_VERSION VERSION_GREATER 3.4)
-            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
-        endif()
-        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
-    endforeach()
-    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
-
-    # Combine excludes to several -e arguments
-    set(GCOVR_EXCLUDE_ARGS "")
-    foreach(EXCLUDE ${GCOVR_EXCLUDES})
-        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
-        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
-    endforeach()
-
-    # Set up commands which will be run to generate coverage data
-    # Run tests
-    set(GCOVR_XML_EXEC_TESTS_CMD
-            ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
-            )
-    # Running gcovr
-    set(GCOVR_XML_CMD
-            ${GCOVR_PATH} --xml -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS} ${GCOVR_EXCLUDE_ARGS}
-            --object-directory=${PROJECT_BINARY_DIR} -o ${Coverage_NAME}.xml
-            )
-
-    if(CODE_COVERAGE_VERBOSE)
-        message(STATUS "Executed command report")
-
-        message(STATUS "Command to run tests: ")
-        string(REPLACE ";" " " GCOVR_XML_EXEC_TESTS_CMD_SPACED "${GCOVR_XML_EXEC_TESTS_CMD}")
-        message(STATUS "${GCOVR_XML_EXEC_TESTS_CMD_SPACED}")
-
-        message(STATUS "Command to generate gcovr XML coverage data: ")
-        string(REPLACE ";" " " GCOVR_XML_CMD_SPACED "${GCOVR_XML_CMD}")
-        message(STATUS "${GCOVR_XML_CMD_SPACED}")
-    endif()
-
-    add_custom_target(${Coverage_NAME}
-            COMMAND ${GCOVR_XML_EXEC_TESTS_CMD}
-            COMMAND ${GCOVR_XML_CMD}
-
-            BYPRODUCTS ${Coverage_NAME}.xml
-            WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-            DEPENDS ${Coverage_DEPENDENCIES}
-            VERBATIM # Protect arguments to commands
-            COMMENT "Running gcovr to produce Cobertura code coverage report."
-            )
-
-    # Show info where to find the report
-    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
-            COMMAND ;
-            COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml."
-            )
-endfunction() # setup_target_for_coverage_gcovr_xml
-
-# Defines a target for running and collection code coverage information
-# Builds dependencies, runs the given executable and outputs reports.
-# NOTE! The executable should always have a ZERO as exit code otherwise
-# the coverage generation will not complete.
-#
-# setup_target_for_coverage_gcovr_html(
-#     NAME ctest_coverage                    # New target name
-#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
-#     DEPENDENCIES executable_target         # Dependencies to build first
-#     BASE_DIRECTORY "../"                   # Base directory for report
-#                                            #  (defaults to PROJECT_SOURCE_DIR)
-#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
-#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
-# )
-# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
-# GCVOR command.
-function(setup_target_for_coverage_gcovr_html)
-
-    set(options NONE)
-    set(oneValueArgs BASE_DIRECTORY NAME)
-    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
-    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-    if(NOT GCOVR_PATH)
-        message(FATAL_ERROR "gcovr not found! Aborting...")
-    endif() # NOT GCOVR_PATH
-
-    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
-    if(DEFINED Coverage_BASE_DIRECTORY)
-        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
-    else()
-        set(BASEDIR ..)
-    endif()
-
-    # Collect excludes (CMake 3.4+: Also compute absolute paths)
-    set(GCOVR_EXCLUDES "")
-    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
-        if(CMAKE_VERSION VERSION_GREATER 3.4)
-            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
-        endif()
-        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
-    endforeach()
-    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
-
-    # Combine excludes to several -e arguments
-    set(GCOVR_EXCLUDE_ARGS "")
-    foreach(EXCLUDE ${GCOVR_EXCLUDES})
-        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
-        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
-    endforeach()
-
-    # Set up commands which will be run to generate coverage data
-    # Run tests
-    set(GCOVR_HTML_EXEC_TESTS_CMD
-            ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
-            )
-    # Create folder
-    set(GCOVR_HTML_FOLDER_CMD
-            ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/${Coverage_NAME}
-            )
-    # Running gcovr
-    set(GCOVR_HTML_CMD
-            ${GCOVR_PATH} --html --html-details -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
-            ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
-            -o ${Coverage_NAME}/index.html
-            )
-
-    if(CODE_COVERAGE_VERBOSE)
-        message(STATUS "Executed command report")
-
-        message(STATUS "Command to run tests: ")
-        string(REPLACE ";" " " GCOVR_HTML_EXEC_TESTS_CMD_SPACED "${GCOVR_HTML_EXEC_TESTS_CMD}")
-        message(STATUS "${GCOVR_HTML_EXEC_TESTS_CMD_SPACED}")
-
-        message(STATUS "Command to create a folder: ")
-        string(REPLACE ";" " " GCOVR_HTML_FOLDER_CMD_SPACED "${GCOVR_HTML_FOLDER_CMD}")
-        message(STATUS "${GCOVR_HTML_FOLDER_CMD_SPACED}")
-
-        message(STATUS "Command to generate gcovr HTML coverage data: ")
-        string(REPLACE ";" " " GCOVR_HTML_CMD_SPACED "${GCOVR_HTML_CMD}")
-        message(STATUS "${GCOVR_HTML_CMD_SPACED}")
-    endif()
-
-    add_custom_target(${Coverage_NAME}
-            COMMAND ${GCOVR_HTML_EXEC_TESTS_CMD}
-            COMMAND ${GCOVR_HTML_FOLDER_CMD}
-            COMMAND ${GCOVR_HTML_CMD}
-
-            BYPRODUCTS ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html  # report directory
-            WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-            DEPENDS ${Coverage_DEPENDENCIES}
-            VERBATIM # Protect arguments to commands
-            COMMENT "Running gcovr to produce HTML code coverage report."
-            )
-
-    # Show info where to find the report
-    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
-            COMMAND ;
-            COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
-            )
-
-endfunction() # setup_target_for_coverage_gcovr_html
-
-# Defines a target for running and collection code coverage information
-# Builds dependencies, runs the given executable and outputs reports.
-# NOTE! The executable should always have a ZERO as exit code otherwise
-# the coverage generation will not complete.
-#
-# setup_target_for_coverage_fastcov(
-#     NAME testrunner_coverage                    # New target name
-#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
-#     DEPENDENCIES testrunner                     # Dependencies to build first
-#     BASE_DIRECTORY "../"                        # Base directory for report
-#                                                 #  (defaults to PROJECT_SOURCE_DIR)
-#     EXCLUDE "src/dir1/" "src/dir2/"             # Patterns to exclude.
-#     NO_DEMANGLE                                 # Don't demangle C++ symbols
-#                                                 #  even if c++filt is found
-#     SKIP_HTML                                   # Don't create html report
-#     POST_CMD perl -i -pe s!${PROJECT_SOURCE_DIR}/!!g ctest_coverage.json  # E.g. for stripping source dir from file paths
-# )
-function(setup_target_for_coverage_fastcov)
-
-    set(options NO_DEMANGLE SKIP_HTML)
-    set(oneValueArgs BASE_DIRECTORY NAME)
-    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES FASTCOV_ARGS GENHTML_ARGS POST_CMD)
-    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-    if(NOT FASTCOV_PATH)
-        message(FATAL_ERROR "fastcov not found! Aborting...")
-    endif()
-
-    if(NOT Coverage_SKIP_HTML AND NOT GENHTML_PATH)
-        message(FATAL_ERROR "genhtml not found! Aborting...")
-    endif()
-
-    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
-    if(Coverage_BASE_DIRECTORY)
-        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
-    else()
-        set(BASEDIR ..)
-    endif()
-
-    # Collect excludes (Patterns, not paths, for fastcov)
-    set(FASTCOV_EXCLUDES "")
-    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_FASTCOV_EXCLUDES})
-        list(APPEND FASTCOV_EXCLUDES "${EXCLUDE}")
-    endforeach()
-    list(REMOVE_DUPLICATES FASTCOV_EXCLUDES)
-
-    # Conditional arguments
-    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
-        set(GENHTML_EXTRA_ARGS "--demangle-cpp")
-    endif()
-
-    # Set up commands which will be run to generate coverage data
-    set(FASTCOV_EXEC_TESTS_CMD ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS})
-
-    set(FASTCOV_CAPTURE_CMD ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
-            --search-directory ${BASEDIR}
-            --process-gcno
-            --output ${Coverage_NAME}.json
-            --exclude ${FASTCOV_EXCLUDES}
-            --exclude ${FASTCOV_EXCLUDES}
-            )
-
-    set(FASTCOV_CONVERT_CMD ${FASTCOV_PATH}
-            -C ${Coverage_NAME}.json --lcov --output ${Coverage_NAME}.info
-            )
-
-    if(Coverage_SKIP_HTML)
-        set(FASTCOV_HTML_CMD ";")
-    else()
-        set(FASTCOV_HTML_CMD ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS}
-                -o ${Coverage_NAME} ${Coverage_NAME}.info
-                )
-    endif()
-
-    set(FASTCOV_POST_CMD ";")
-    if(Coverage_POST_CMD)
-        set(FASTCOV_POST_CMD ${Coverage_POST_CMD})
-    endif()
-
-    if(CODE_COVERAGE_VERBOSE)
-        message(STATUS "Code coverage commands for target ${Coverage_NAME} (fastcov):")
-
-        message("   Running tests:")
-        string(REPLACE ";" " " FASTCOV_EXEC_TESTS_CMD_SPACED "${FASTCOV_EXEC_TESTS_CMD}")
-        message("     ${FASTCOV_EXEC_TESTS_CMD_SPACED}")
-
-        message("   Capturing fastcov counters and generating report:")
-        string(REPLACE ";" " " FASTCOV_CAPTURE_CMD_SPACED "${FASTCOV_CAPTURE_CMD}")
-        message("     ${FASTCOV_CAPTURE_CMD_SPACED}")
-
-        message("   Converting fastcov .json to lcov .info:")
-        string(REPLACE ";" " " FASTCOV_CONVERT_CMD_SPACED "${FASTCOV_CONVERT_CMD}")
-        message("     ${FASTCOV_CONVERT_CMD_SPACED}")
-
-        if(NOT Coverage_SKIP_HTML)
-            message("   Generating HTML report: ")
-            string(REPLACE ";" " " FASTCOV_HTML_CMD_SPACED "${FASTCOV_HTML_CMD}")
-            message("     ${FASTCOV_HTML_CMD_SPACED}")
-        endif()
-        if(Coverage_POST_CMD)
-            message("   Running post command: ")
-            string(REPLACE ";" " " FASTCOV_POST_CMD_SPACED "${FASTCOV_POST_CMD}")
-            message("     ${FASTCOV_POST_CMD_SPACED}")
-        endif()
-    endif()
-
-    # Setup target
-    add_custom_target(${Coverage_NAME}
-
-            # Cleanup fastcov
-            COMMAND ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
-            --search-directory ${BASEDIR}
-            --zerocounters
-
-            COMMAND ${FASTCOV_EXEC_TESTS_CMD}
-            COMMAND ${FASTCOV_CAPTURE_CMD}
-            COMMAND ${FASTCOV_CONVERT_CMD}
-            COMMAND ${FASTCOV_HTML_CMD}
-            COMMAND ${FASTCOV_POST_CMD}
-
-            # Set output files as GENERATED (will be removed on 'make clean')
-            BYPRODUCTS
-            ${Coverage_NAME}.info
-            ${Coverage_NAME}.json
-            ${Coverage_NAME}/index.html  # report directory
-
-            WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
-            DEPENDS ${Coverage_DEPENDENCIES}
-            VERBATIM # Protect arguments to commands
-            COMMENT "Resetting code coverage counters to zero. Processing code coverage counters and generating report."
-            )
-
-    set(INFO_MSG "fastcov code coverage info report saved in ${Coverage_NAME}.info and ${Coverage_NAME}.json.")
-    if(NOT Coverage_SKIP_HTML)
-        string(APPEND INFO_MSG " Open ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report.")
-    endif()
-    # Show where to find the fastcov info report
-    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
-            COMMAND ${CMAKE_COMMAND} -E echo ${INFO_MSG}
-            )
-
-endfunction() # setup_target_for_coverage_fastcov
-
-function(append_coverage_compiler_flags)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
-    set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
-    message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
-endfunction() # append_coverage_compiler_flags
diff --git a/dbms/CMakeLists.txt b/dbms/CMakeLists.txt
index c5813f9735a..9ac2b49db5e 100644
--- a/dbms/CMakeLists.txt
+++ b/dbms/CMakeLists.txt
@@ -337,34 +337,6 @@ if (ENABLE_TESTS)
     add_check(bench_dbms)
 endif ()
 
-if (TEST_COVERAGE AND CMAKE_BUILD_TYPE STREQUAL "Debug")
-    set (COVERAGE_LCOV_EXCLUDES
-        "/Library/Developer/CommandLineTools/usr/include/*"
-        "/usr/include/*"
-        "/usr/local/*"
-        "/usr/lib/*"
-        "${CMAKE_SOURCE_DIR}/cmake-build-*/*"
-        "${CMAKE_SOURCE_DIR}/contrib/*"
-        )
-    set (COVERAGE_GCOVR_EXCLUDES ${COVERAGE_LCOV_EXCLUDES})
-
-    if (TEST_COVERAGE_XML)
-        setup_target_for_coverage_gcovr_xml (
-            NAME tiflash_gcovr_coverage
-            BASE_DIRECTORY ${CMAKE_SOURCE_DIR}
-            DEPENDENCIES "gtests_dbms" "gtests_libcommon" "gtests_libdaemon"
-            EXECUTABLE echo "please run gtests manually"
-        )
-    else ()
-        setup_target_for_coverage_lcov (
-            NAME tiflash_coverage_lcov
-            BASE_DIRECTORY ${CMAKE_SOURCE_DIR}
-            DEPENDENCIES "gtests_dbms" "gtests_libcommon" "gtests_libdaemon"
-            EXECUTABLE echo "please run gtests manually"
-        )
-    endif ()
-endif ()
-
 # dbms
 add_target_pch("pch-dbms.h" dbms flash_service)
 add_target_pch("pch-common.h" clickhouse_common_io clickhouse_aggregate_functions)