diff --git a/Marlin/src/HAL/STM32/tft/gt911.cpp b/Marlin/src/HAL/STM32/tft/gt911.cpp
index 180abc68b054..82b7c5b10391 100644
--- a/Marlin/src/HAL/STM32/tft/gt911.cpp
+++ b/Marlin/src/HAL/STM32/tft/gt911.cpp
@@ -150,9 +150,9 @@ void GT911::read_reg(uint16_t reg, uint8_t reg_len, uint8_t* r_data, uint8_t r_l
   sw_iic.start();
   sw_iic.send_byte(gt911_slave_address + 1);  // Set read mode
 
-  LOOP_L_N(i, r_len) {
+  LOOP_L_N(i, r_len)
     r_data[i] = sw_iic.read_byte(1);  // Read data from reg
-  }
+
   sw_iic.stop();
 }
 
diff --git a/Marlin/src/HAL/STM32/tft/gt911.h b/Marlin/src/HAL/STM32/tft/gt911.h
index 6ecfe8b82ec7..260c195eca63 100644
--- a/Marlin/src/HAL/STM32/tft/gt911.h
+++ b/Marlin/src/HAL/STM32/tft/gt911.h
@@ -39,42 +39,18 @@ class SW_IIC {
   private:
     uint16_t scl_pin;
     uint16_t sda_pin;
-    void write_scl(bool level)
-    {
-      WRITE(scl_pin, level);
-    }
-    void write_sda(bool level)
-    {
-      WRITE(sda_pin, level);
-    }
-    bool read_sda()
-    {
-      return READ(sda_pin);
-    }
-    void set_sda_out()
-    {
-      SET_OUTPUT(sda_pin);
-    }
-    void set_sda_in()
-    {
-      SET_INPUT_PULLUP(sda_pin);
-    }
-    static void iic_delay(uint8_t t)
-    {
-      delayMicroseconds(t);
-    }
+    void write_scl(bool level) { WRITE(scl_pin, level); }
+    void write_sda(bool level) { WRITE(sda_pin, level); }
+    bool read_sda() { return READ(sda_pin); }
+    void set_sda_out() { SET_OUTPUT(sda_pin); }
+    void set_sda_in() { SET_INPUT_PULLUP(sda_pin); }
+    static void iic_delay(uint8_t t) { delayMicroseconds(t); }
 
   public:
     SW_IIC(uint16_t sda, uint16_t scl);
     // setSCL/SDA have to be called before begin()
-    void setSCL(uint16_t scl)
-    {
-      scl_pin = scl;
-    };
-    void setSDA(uint16_t sda)
-    {
-      sda_pin = sda;
-    };
+    void setSCL(uint16_t scl) { scl_pin = scl; }
+    void setSDA(uint16_t sda) { sda_pin = sda; }
     void init();                // Initialize the IO port of IIC
     void start();               // Send IIC start signal
     void stop();                // Send IIC stop signal
diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp
index cdda7ca85abf..c5df604517ba 100644
--- a/Marlin/src/lcd/marlinui.cpp
+++ b/Marlin/src/lcd/marlinui.cpp
@@ -173,6 +173,10 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
 
 #endif
 
+#if HAS_U8GLIB_I2C_OLED && PINS_EXIST(I2C_SCL, I2C_SDA) && DISABLED(SOFT_I2C_EEPROM)
+  #include "Wire.h"
+#endif
+
 // Encoder Handling
 #if HAS_ENCODER_ACTION
   uint32_t MarlinUI::encoderPosition;
@@ -265,6 +269,10 @@ void MarlinUI::init() {
     slow_buttons = 0;
   #endif
 
+  #if HAS_U8GLIB_I2C_OLED && PINS_EXIST(I2C_SCL, I2C_SDA) && DISABLED(SOFT_I2C_EEPROM)
+    Wire.begin(int(I2C_SDA_PIN), int(I2C_SCL_PIN));
+  #endif
+
   update_buttons();
 
   TERN_(HAS_ENCODER_ACTION, encoderDiff = 0);